Re: Started my first frame off - 72 SWB LS1, 6-spd manual
 

You got her running yet Mark?

Re: Started my first frame off - 72 SWB LS1, 6-spd manual
 

Just read through the build.

Looking Good, Keep it Up!

Re: Started my first frame off - 72 SWB LS1, 6-spd manual
 

Not yet Mike:waah:

I just checked the tracking number on my radiator and it will be here tomorrow:metal: after a lot of research I decided to go with a Griffin from Summit Racing. It will have both the inlet/outlet on the passenger side to match the LS ports. It is also equipped with two 16" fans and is a direct fit. I will post some pics after I receive it.

http://www.summitracing.com/parts/gri-cu-00013-ls

I should also get my my engine harness and ECM back next week from S&S Performance out of Arkansas. WWW.LSX-HARNESS.COM
They are adding the fuses and relays for my fans and fuel pump, and turning it into a stand alone harness.

I did get my battery tray built and mounted on the frame with 1/4" aluminum and my rusty TIG skills lol. If everything goes right I should have it running in next few weeks.

Re: Started my first frame off - 72 SWB LS1, 6-spd manual
 

Thanks for taking the time to read through it...

Your build is looking great. I like the direction your going with it..

Re: Started my first frame off - 72 SWB LS1, 6-spd manual
 

Congrats on the radiator, That looks like a very nice setup. Cool battery tray too. Be glad to see this truck running. We will need a video :)

Re: Started my first frame off - 72 SWB LS1, 6-spd manual
 

Truck is so bad ass man! Great Job! :metal:

Re: Started my first frame off - 72 SWB LS1, 6-spd manual
 

Thank You...

Re: Started my first frame off - 72 SWB LS1, 6-spd manual
 

I finally got my wiring harness back Saturday.

Re: Started my first frame off - 72 SWB LS1, 6-spd manual
 

Pic 2 of harness

Re: Started my first frame off - 72 SWB LS1, 6-spd manual
 

I had to order 4 core mounts to be able to install the radiator (my first LMC order). The radiator looks very well built and I can't wait to get into the truck.

Re: Started my first frame off - 72 SWB LS1, 6-spd manual
 

Radiator pic

Re: Started my first frame off - 72 SWB LS1, 6-spd manual
 

Pic 2 of radiator with 16" SPAL fans

Re: Started my first frame off - 72 SWB LS1, 6-spd manual
 

I ran the engine harness through the firewall today. It was a little nerve racking hole sawing through the firewall. I still need to install a grommet. Getting closer to finally hearing it run. I can't wait.

Re: Started my first frame off - 72 SWB LS1, 6-spd manual
 

Harness looks good Mark and so does that radiator/fan assembly. It fits in the stock 4 core mounts?

Re: Started my first frame off - 72 SWB LS1, 6-spd manual
 

Thanks Keith. I hope so. I called Griffin's tech support to make sure before I ordered the mounts. I should receive them by Friday. The radiator measures exactly 3" in width top/bottom. If your running the same mounts (4 core) can you verify the width for me?

Re: Started my first frame off - 72 SWB LS1, 6-spd manual
 

Nice looking radiator Mark, love the clean engine bay. I'm ready to see a video of this puppy running.

Re: Started my first frame off - 72 SWB LS1, 6-spd manual
 

Mark I am running the 4 core mounts, my frame is currently in my tent in the back yard for storage. I'll get you a measurement tomorrow after the monsoon stops here in Jersey :lol:

Re: Started my first frame off - 72 SWB LS1, 6-spd manual
 

Thanks Mike! It's been a long 4 years lol.. Your truck came out amazing. As soon as I get it fired up I will post some video. It may not have any mufflers:metal:

Re: Started my first frame off - 72 SWB LS1, 6-spd manual
 

Not a big deal if you can't get to it. Tracking number shows I should get them Friday. Thanks Keith

Re: Started my first frame off - 72 SWB LS1, 6-spd manual
 

Thanks Mark. I hear you about the four years it's amazing how long it takes to go through one of these old trucks. Your truck is gonna be so nice, all that time and effort will pay off in the end.

Re: Started my first frame off - 72 SWB LS1, 6-spd manual
 

Mark I just went out and measured my 4 core mounts. The rubber inserts measure right at 3" from bend to bend on the inside where they bend around the top of the radiator. Should work out perfect for you. Does that radiator have Trans cooler lines in it?

Re: Started my first frame off - 72 SWB LS1, 6-spd manual
 

Great news. One less headache lol. No trans cooler since I am running the manual transmission. The nice thing with the radiator is the inlet/outlet are both on the passenger side so they match the ports on the LS. There is also a steam port fitting in the radiator for the LS. Thanks for taking the time to grab me the measurements Keith!

Re: Started my first frame off - 72 SWB LS1, 6-spd manual
 

Today I finished installing the engine harness. So far I am really satisfied with the workmanship from S&S Performance. They labeled every plug and sent a legend for each connection along with a trouble shooting guide.

Re: Started my first frame off - 72 SWB LS1, 6-spd manual
 

Pic 2

Re: Started my first frame off - 72 SWB LS1, 6-spd manual
 

Lol I completely forgot you were running the 6 speed. Anytime I can help Mark.

Re: Started my first frame off - 72 SWB LS1, 6-spd manual
 

Very nice build.
Can't wait to see the finished product.

Re: Started my first frame off - 72 SWB LS1, 6-spd manual
 

I have the same radiator on my truck with 4 core mounts. It sat a little high so the upper mounts didn't want to sit on top of the core support without some persuasion. You could probably trim the rubber portion of the mounts down a little or run some small spacers between the upper mounts and the core support. I'd like to get the upper mount that Keith is running one of these days but I'm not sure how well it would fit with this radiator

Re: Started my first frame off - 72 SWB LS1, 6-spd manual
 

Thanks for the link in the LS section.. Nice to see there are a few guys using the radiator and seem to be happy with it. The mounts showed up today and they seem to fit nice and snug. I will use your advice when I install it. Ya, I really like Keith's upper mount too, it's clean.

Re: Started my first frame off - 72 SWB LS1, 6-spd manual
 

Thanks:metal: Nice to see another Vegas member on the board.

Re: Started my first frame off - 72 SWB LS1, 6-spd manual
 

I forgot what accessories you're using with your engine and how the water pump is positioned but i used a 07 tbss upper radiator hose with mine that has the truck accessories. Glad I could help with the link. Can't wait to see your truck finished

Edit: Just looked and your water pump snout is definately different from mine

Re: Started my first frame off - 72 SWB LS1, 6-spd manual
 

Today I was able to get the radiator in and wire the fans. Im really happy how well it fit.

Re: Started my first frame off - 72 SWB LS1, 6-spd manual
 

Pic 2

Re: Started my first frame off - 72 SWB LS1, 6-spd manual
 

Looking good!

Re: Started my first frame off - 72 SWB LS1, 6-spd manual
 

Thanks Duane:metal:

I have been working on all of the small details. Mounting the ECM/fuse box/relays, power steering hoses, radiator hoses and fuel lines.

Re: Started my first frame off - 72 SWB LS1, 6-spd manual
 

For some reason I can still only upload 1 pic at a time on IPad.

Re: Started my first frame off - 72 SWB LS1, 6-spd manual
 

Pic 3

Re: Started my first frame off - 72 SWB LS1, 6-spd manual
 

Looking good Mark! You are so close now, you better get some gas.....

Re: Started my first frame off - 72 SWB LS1, 6-spd manual
 

Thanks Mike... Ya, I can see the light at the end of the tunnel lol. I'm waiting for the fuel filter/fuel pump and fittings to show up so I can Finish the fuel system. This weekend I plan on having all of the start system, charging system fans and fuel pumps wired up and I should be able to start it.:metal:

Today I stopped by a local off-road shop to pick up fittings and wire loom and found a master cylinder for my clutch. It's made by Jamar and has a 3/4" bore with a nice size reservoir. I also liked the fact it's machined black and isn't all blingy lol. They also offer a rebuild kit for it.

Re: Started my first frame off - 72 SWB LS1, 6-spd manual
 

Picture of master cylinder

Re: Started my first frame off - 72 SWB LS1, 6-spd manual
 

Youve come a long way!