Re: S!ck5 65 rebuild
 

Oh and by the way I scored another set of the light bezel for the GMC lights and a really nice 63 GMC strong wheel for free
Posted via Mobile Device

Re: S!ck5 65 rebuild
 

well im still alive!!

Re: S!ck5 65 rebuild
 

Post some pics of all these new parts your accumulating!
Tony from Norcal
Posted via Mobile Device

Re: S!ck5 65 rebuild
 

lol i forgot you been watching me buy stuff

Re: S!ck5 65 rebuild
 

So I got hood,doors, rear tire wheels, front bumper brackets and two fenders ....
I got.a lot.planned with each item..
Just took the doors apart and they are ready for sanding
Hood needs some work and I just finish popping out a dent it had and need bando and sanding
I'm using the fenders to replace the cut I did.wheel opening!

Change of plans with the power steering not doing it any more. Truck turns a lot better with the original steering wheel
Posted via Mobile Device

Re: S!ck5 65 rebuild
 

And I'm working on another long bed that was given to me..
Posted via Mobile Device

Re: S!ck5 65 rebuild
 

Anything new on the build?

Re: S!ck5 65 rebuild
 

X2 on that!

Re: S!ck5 65 rebuild
 

Put in a metal bed floor.. Now I need some 67-72 Tubs...
Went thru another fn hood poped on me..
I bought a 97 Tahoe that drove great but owed 700 in tags soi sold it and strip the L31 engine for the truck. Other than that we cool over here.


Also added the doors and that other bed..

Re: S!ck5 65 rebuild
 

Bed looks good. Stockton pick and pull have 5 or so 67-72 long beds. You should be able to find a set of tubs there.

Re: S!ck5 65 rebuild
 

Thanks I'll check it out..
Any going to the 99 speedway sunday

Re: S!ck5 65 rebuild
 

Looks good. Will the 64-66 bed wheel wells not fit? I just picked up a steel floor the other day. Do you have any more pics of how you put the bed floor in?

Re: S!ck5 65 rebuild
 

I made a mistake cutting the back corners to much.for me since I have raised my floor I cut about an inch on all cross beams under that bed floor. Then notch out the back corners.
On the install you have to remove one side Of the bed.
And you need 67-72 wheel tubs 60-66 too small

Re: S!ck5 65 rebuild
 

Getting **** moving. See you guys at brothers soon

Re: S!ck5 65 rebuild
 

Trying something new.!

Re: S!ck5 65 rebuild
 

Looks pretty good!

Quick question though, off subject but you don't know the diameter of the tube used on your porterbuilt bridge do you?

Re: S!ck5 65 rebuild
 

I got a 65 GMC as well and am in the process of swapping out the 305 for a 350. Where did you get the wiring harness for the conversion? Thanks for the info!
:gmc2:

Re: S!ck5 65 rebuild
 

I think it's an inch.but I can check

Re: S!ck5 65 rebuild
 

American auto wire... Charlie

Re: S!ck5 65 rebuild
 

If you could if appreciate it! Thanks!

Re: S!ck5 65 rebuild
 

Thanks for the info.

Re: S!ck5 65 rebuild
 

Added the side mounding and working on new spot for the accuair

Re: S!ck5 65 rebuild
 

Rob sorry i didnt get that info. Glad to finaly meet you @ Rene party.:metal:

Re: S!ck5 65 rebuild
 

matter of fact they do fit just need to shorten them 3 inches

Re: S!ck5 65 rebuild
 

No problem on the size! It was good to see you again too. I'm going to try and see you guys more at the shows and what not. I was wondering about the size so I have a good variation of dies for my bender. I thought it was 1.5 .120 but apparently 1" is large enough.

Re: S!ck5 65 rebuild
 

Well your in luck since I hade pull the transmission out I can see what size is it. I'll do it tomorrow after work

Re: S!ck5 65 rebuild
 

well let me know if you still need that info

Re: S!ck5 65 rebuild
 

Yea, since you're going to be apart anyway if you could I'll take it for reference on what they use. Thank you!

Re: S!ck5 65 rebuild
 

So far you need tube size on the bridge right

Re: S!ck5 65 rebuild
 

Yea. The bridge. Please.

Re: S!ck5 65 rebuild
 

1 1/2 hardest454

Re: S!ck5 65 rebuild
 

Thank you! Greatly appreciated!

Re: S!ck5 65 rebuild
 

working on my Accuair project. Most people have it installed under the bed. But i like the look of it on top of the bed.
I need to remove the the tank. reinstall new 3/8 air lines. i have 1/2 at the moment. I really wanted to buy the accuair au4 tank mount but dont have the cash. so i fig i would try to build my own. here some picture of the mount.

Re: S!ck5 65 rebuild
 

anyone know if its a good idea to weld on to the air tank? i got a few ideas for the airtank mount. using a chain to wrap around the airtank then from the chain to the accuair mount. just need to remove the tank and try it out

Re: S!ck5 65 rebuild
 

waiting on porterbuilt stuff sucks lol

Re: S!ck5 65 rebuild
 

Tell me about it... I orderd the gas assist. Last week.
we'll I got a few goodies coming.

Re: S!ck5 65 rebuild
 

polished my window channel
now one more to go

Re: S!ck5 65 rebuild
 

:smoke:well
haven't been here for awhile so just wanted post a quick pic! ;)