Re: 49 ls1
 

yeah its a 2wd vehicle the swap is coming from.

Re: 49 ls1
 

This should help for those wanting to convert a factory harness to standalone config.

https://spreadsheets.google.com/spre...KSkg2Z3c&hl=en

Re: 49 ls1
 

Oh wow that's great info THANKYOU!!

Re: 49 ls1
 

Sarge,is this a cover to access your brake master?Are you just going to screw it down for access?

And one more...What is the door latches you welded in,and what did you do to align them properly in your door when welding them in?

Re: 49 ls1
 

Charliesheen; Yes, the access cover is for the under floor dual reservoir. I'm not screwing it down though. The 1/4" rod I welded on the underside locks it in place nicely. Door latches are bear claws. I adjusted the doors so that the wind lines and gaps were where I wanted them. Then carefully marked the "door side" of the bear claw and cut/welded them in. The striker side is adjustable, that way final tweaks can be made.

Not much photo evidence of progress on this one this week. Working on a customer truck. I'll start a thread on it when it's a little further along.

Re: 49 ls1
 

Great work buddy, absolutely amazing.

Re: 49 ls1
 

I think the most anticipated novel of the year will be when you explain how you install your power windows and locks,and in-door wiring.That,right there will be special.:metal:

Re: 49 ls1
 

That may not be till this winter! LoL

Re: 49 ls1
 

Any hints or candidates for the door lock and power window equipment? A mishmash of fab and components?What have you gone with on past projects that you have found decent?( OK-I know Christmas is coming,haha,excuse the child like impatience).

Re: 49 ls1
 

No worries. I intend to use a "universal flat glass window riser set". Since I have Bear Claw latches, I'm going to swap them out for power bear claws.

Re: 49 ls1
 

Chris, glad your back, how was the trip...Jim

Re: 49 ls1
 

Awesome. Eight 18-21hr. days of 4 wheelin' and road trippin' I'm going to submit my Scout for next year's Ultimate Adventure>

Re: 49 ls1
 

So I finally got some '49 time today, most of the recent work hasn't been very picture-worthy. I finally got the '59 Olds seat out of the other truck and mocked it up in this one. It fits like a glove, and is surprisingly comfortable. Next week it will go off to the Upholstery shop, with some pattern sketches, to make it look more "iconic 50's"... It will be 2 tone, with maybe a 3rd color accent.

I also got the front end finished up, and bolted on. Hopefully for the last time before the cruise night and the show in August.

Re: 49 ls1
 

Here's the finished 2 tone dash, ready to start installing hardware. Colors are OD green and Almond. The Almond matches the leather wrap on my new steering wheel quite nicely. The seat will get done in matching colors.

Mark Ripley of Ripley's Old School Pinstriping in Olathe KS will do some accent striping to divide the colors a little better at the August Cruise. :metal:

Re: 49 ls1
 

great lookin build

Re: 49 ls1
 

coming together sarge. seat is nice.

Re: 49 ls1
 

Thank you, I'm really looking forward to getting it out to it's first show, even though it will be "Under Construction" still.

Spent a few minutes this evening mocking up the new 12" Lokar shifter...

Re: 49 ls1
 

Chris, dash looks super. Truck really taking shape, nice work....Jim

Re: 49 ls1
 

Love your build Sarge, keep up the awesome work. The Lokar is perfect under your incredible dash. Will you be running carpet?

Re: 49 ls1
 

Jim; thank you. I am pleased with how it is turning out for sure!

squirts; Thank you as well. My usual banter is that I am against fancy high end stuff, but for the interior, there wasn't any other option than a Lokar shifter, and Billet Specialties wheel. I will be laying carpet in it. I'm leaning towards Cut and sewn O.D. green, to tie everything in with the beige/OD green color combo. It will also be getting 2 tone upholstery, and custom door panels, done with a 50's flair.

Re: 49 ls1
 

The truck is looking great! Really nice plans for the interior.

Re: 49 ls1
 

Looking great! What did you use to spray your dash?

Re: 49 ls1
 

Dash looks great,I like the subtle color choice.Inspirational!

Did you change your mind about those dash extension pieces extending onto doors?

How'd you come up with the seat???

I like the exterior finish on the truck.More uniform than the regular "patina".Looks like a weathered river rock.

Re: 49 ls1
 

Where is the August Cruise? Are you guys coming to the Nats?

Re: 49 ls1
 

Thank you all.

The dash is sprayed in an OD green I had a local body supply store mix up for me, and an Almond color they mixed to match the leather wrap on the steering wheel. Sprayed with a touchup gun actually... :lol:

CharlieSheen; The dash extension pieces are still going to happen, but with it's first show less than a month away, I had to make some choices on what was going to get done, and what could happen later in the winter. The seat is a '59 Olds bench from a 4-door sedan. And thanks, I'm calling the exterior look "Shabby Chic".

Low Elco; Wouldn't miss it for the world. In fact I'll have a vendors booth. Both the kids truck and my '49 (under construction) will be there along with 3 or 4 customer trucks.

Re: 49 ls1
 

I dropped my bench seat off at the upholstery shop today, and spent over an hour picking fabrics and discussing the look I want it to have. The seat pattern will be based on a '57 Studebaker Golden Hawk design, complete with double stitching, and pleated inserts. (pic 1). The colors will be OD green surround and Almond inserts. I had him order extra yards of each material, to complete the door panels, kick panels, and headliner later this winter.

I also started assembling the dash this evening. Starting to look damn good I think!

Re: 49 ls1
 

Low Elco... August cruise is in Topeka, 4pm at the Dugout, 16 Aug.

Warrensburg show (about 400 cars) is on 24 Aug

Re: 49 ls1
 

Very,very cool.
But now it is starting to sound like one of those build-off shows,lol.Like you have a deadline.Do you plan on having it driveable for these shows?

Re: 49 ls1
 

Man does that look awesome!!!!!!!!! I love it!

Re: 49 ls1
 

Charliesheen; Not a build-off. The purpose of this truck is to show the engineering that went into it. It will be an "under-construction" display. While it won't be "road-worthy", I will drive it on and off the trailer, air it up and down, etc. I needed to get enough done to show the basic concept of the truck, not finish it.

Thanks BlueBomber...

Re: 49 ls1
 

Sounds like a great idea,truck should attract a lot of attention.People are usually fascinated to see things going through the process.

Re: 49 ls1
 

The almond and OD work perfectly together, as does the dash. Great vision and execution!!

Greg

Re: 49 ls1
 

Great work, can't wait to see you and it and the Kid!

Re: 49 ls1
 

Thanks all.

CharlieSheen; That was kind of the plan for the last few months. Once it's finished, it looks like every other finished truck. While it's under construction, it is more interesting. ;)

Thanks Low Elco.... We'll be there, along with several of my builds, beer, brauts, you name it!:metal:

Re: 49 ls1
 

New pics for ya'll...

New body harness is in, and she's turn key now!

Next is the '50 Chevy car hood emblem I'm using. I've modified both the hood, the center hood trim, and the emblem to make them look right.

Next is the '56 Chevy truck V8 emblems that will replace the "3100" on the side of the hood.

Last pic is my new "smoked" rear glass installed. I'm going to let Mark's Mobile glass install the windshields. Just isn't worth the hassle for a hundred bucks!:waah:

Re: 49 ls1
 

Here she is with the bed back on, waiting for the rear fenders to get worked on.

Last one is a nice 3/4 profile shot:metal:

Re: 49 ls1
 

Looking good!

Re: 49 ls1
 

Also, if anyone here has a lead on tri 5 stuff. I'm looking for '55 Chevy Belair (4 door) door panel chrome, the one that makes the big "V" like the picture below. I need a pair of front door trim to make the door panels for this truck. These have the PERFECT look to them!

Re: 49 ls1
 

Hell yeah mangs!

Re: 49 ls1
 

Chris, looking good buddy, hood should look great with the changes...Jim