Re: What did you do to your truck today? Chapter II
 

Ran de-greaser and metal prep through my $50 Craigslist gas tank. Going to put POR-15 fuel tank sealer through it tomorrow morning.

And after two days of drilling and hammering and pressing and *****ing and cussing and even torching the damn thing, I finally gave up on trying to get those damn roll pins out of the door hinges.

Re: What did you do to your truck today? Chapter II
 

Not exactly a truck progress post but I painted up a new body for my RC car and had to try out of my favorite factory paint combos. Wish my pickup looked this good but this totally got me motivated to get moving on mine.

Re: What did you do to your truck today? Chapter II
 

What kind of rc car did you build? Traxxus?

Re: What did you do to your truck today? Chapter II
 

It's a Vaterra. It's the best looking body I have see. They make a cool looking rock crawler also. But if I keep playing with RC cars I will never get back to my big projects

Re: What did you do to your truck today? Chapter II
 

Sweet. I think I saw those on amazon. They had a black slammed 72 for like $259. I want it bad but that could be a new cam for my truck if I had the cash to blow.

Re: What did you do to your truck today? Chapter II
 

So true! I picked mine up used with the black body and picked up clear on to paint like mine. It's a expensive hobby

Re: What did you do to your truck today? Chapter II
 

Double post again

Re: What did you do to your truck today? Chapter II
 

Very expensive hobby!
But the more fun they are, the more expensive the hobby!
These are a few I have owned (I have had numerous others, but these 2 were some of my favorites);

http://i1183.photobucket.com/albums/...0107-12-31.jpg

http://i1183.photobucket.com/albums/...C/DSC03881.jpg

This is the only one I have left, down sized to finance other hobbies!

http://i1183.photobucket.com/albums/...ps0de3b045.jpg

Re: What did you do to your truck today? Chapter II
 

Fixed a transmission cooler leak yesterday. Red drips in the snow...?? Where is that from??!! Tightened up the clamps and it seems to have stopped. Have some small current draw I'm attempting to track down. The battery will drain after about 4 days of no driving. Not sure what it is that is draining that battery. I'll find it, it can't hide forever.

Re: What did you do to your truck today? Chapter II
 

More parts detailing.

http://i1190.photobucket.com/albums/...pstip4ggoh.jpg

http://i1190.photobucket.com/albums/...psgr9nvxl0.jpg

http://i1190.photobucket.com/albums/...ps6cm1vtfu.jpg

http://i1190.photobucket.com/albums/...ps2nf5ralf.jpg

Re: What did you do to your truck today? Chapter II
 

Looking great!

Re: What did you do to your truck today? Chapter II
 

The Rat Ramp!

Yesterday and today I worked on the rat ramp for a few hrs since the temps where nice.

I got the heater all cleaned out and all 3 speeds of the fan working nicely! The ash tray was stuck and I had a heck of a time getting it out but once out I got the bearings cleaned up and greased up she is sliding in & out nicly now!

I had installed the new radiator about a month ago so I got the over flow tank installed yesterday as well.

I swapped steering wheel out and took the master cylinder loose for the booster install. Have to order a new rod for it.
The old 67 horn cap cleaned up pretty nice.
A friend came by yesterday as I was working on it and said you know I have a few parts stashed for these old trucks, so I asked what he had...factory tilt wheel new dash cover RED and a seat cover! So in a few weeks I'm getting it all for the RAT!

I think I'll even order the digital gauges for it later on after we get over Christmas.

http://i.ebayimg.com/images/g/OhUAAO...yu/s-l1600.jpg:chevy:

Re: What did you do to your truck today? Chapter II
 

Just doing a lot of fitting and mock up on the new bed sills, front, and wood kit... Lots and lots to do yet. The above frame rear sway bar gets in the way so that needs to be addressed and 2 holes in the new front dont match up with the holes in the sides on the driver side as well, buts no biggie since the sides still need lots of work as you can see. Lots of trouble trying to save the sides...

Re: What did you do to your truck today? Chapter II
 

That thing is pretty cool.. I could really use something like that

Re: What did you do to your truck today? Chapter II
 

[QUOTE=Andy4639;7803439][B][COLOR="Red"]The Rat Ramp!

Yesterday and today I worked on the rat ramp for a few hrs since the temps where nice.

I got the heater all cleaned out and all 3 speeds of the fan working nicely! The ash tray was stuck and I had a heck of a time getting it out but once out I got the bearings cleaned up and greased up she is sliding in & out nicly now!

I had installed the new radiator about a month ago so I got the over flow tank installed yesterday as well.

I swapped steering wheel out and took the master cylinder loose for the booster install. Have to order a new rod for it.
The old 67 horn cap cleaned up pretty nice.
A friend came by yesterday as I was working on it and said you know I have a few parts stashed for these old trucks, so I asked what he had...factory tilt wheel new dash cover RED and a seat cover! So in a few weeks I'm getting it all for the RAT!

I think I'll even order the digital gauges for it later on after we get over Christmas.


Andy4639 when did you get the rat trap , i have not seen it before....Don

Re: What did you do to your truck today? Chapter II
 

Inner fenders photo from the painter.:metal:

Re: What did you do to your truck today? Chapter II
 

Can only post one photo at a time from my iPad.
Tailgate painted also.:chevy:

Re: What did you do to your truck today? Chapter II
 

Thanks, I had my eye on it for several years. It was about 20 minutes from the house and finally this past July I got it.:chevy:

Re: What did you do to your truck today? Chapter II
 

[quote=ole dollor;7804150]
I got it right after we bought the 64 SS Impala. We decided we needed something to haul the 56 Bel Air and the 64 SS Impala along with my truck to shows!:chevy:

Re: What did you do to your truck today? Chapter II
 

Getting some freshtoration done on the '72. Here are before and after pics of the seat. Time of day and sun make the color look different, but it's not, it's original vinyl in the original color.

Re: What did you do to your truck today? Chapter II
 

Scored a 60/40 bench for my '71. In decent shape for $70. My bench is trashed and not comfortable

Re: What did you do to your truck today? Chapter II
 

Got tired of not having a working radio so since the dash was still cut up I decided to take a old radio that was laying around and wire it in. Put some 200 watt 4 inch speakers under the seat and popped a CD in!

The good: It sounds awesome!

The bad: Auxiliary In seems yo not work right now but I think its because of a cord that is a little too long (25ft).

Once I try a reasonable lengthened cord and get that working then ill just have to plug in a antenna so I can listen to the radio. :metal:

Re: What did you do to your truck today? Chapter II
 

changed up the interior on the project for the third time. got a good deal on some white bucket seats. found door panels on ebay for $20

Re: What did you do to your truck today? Chapter II
 

Yesterday, I finally finished up under the dash, and installed my "new" glovebox insert (I've had it in the garage for about six years, so it was time :lol:). For those wonderinding "how difficult was it?, not at all, it just takes a little patience to get the screws to start. I also changed out my window seals. Makes all the difference in the world. :metal:

Re: What did you do to your truck today? Chapter II
 

Started running all the new SS brake lines.. Not sure why they all came out on the OUTSIDE of the frame at the front where the all meat up to go up to the MC... but I guess i can fix that easy enough...

Re: What did you do to your truck today? Chapter II
 

I recently redid my brake lines and remember reading that there were some trucks in '67 that had the brake lines run to the outside of the frame like this, and there were kits available that replicated this. For the kit I used, I remember there being an option to choose inside or outside the frame. Looks like you ended up with the kit that goes outside.

Re: What did you do to your truck today? Chapter II
 

Thats a deal!!!:metal:

Re: What did you do to your truck today? Chapter II
 

Well, initially I was going to install an adapter plate for my qjet to performer intake and check the rear differential fluid level. I was able to install the plate and clean up the intake somewhat, then I started to inspect my v-belts. I had new ones in case they were due. That some when I noticed this....

My lower alternator bracket was clean broke off at the rear mounting tab. Have no idea how long it's been like that... I did just adjust the belt tension about 2 weeks ago. I did notice a difference in the electrical side of things (dim headlights, static on the radio speakers, dim gauges.)
Also, we had some rain last week, and was using the wipers, I was told by previous owner that the washer pump had a hiccup in it that would run the reservoir dry and continue to pump without turning off. I must have forgotten that when I rewired the entire vehicle, rewind back to last week and I was messing with the switch and noticed if I pressed the wiper switch in my wipers would kick on to the slowest speed, "cool." I thought..... well when I got home I tried sticking my hand under the dash to see if I could clear up the static I was picking up on the radio, when my hand grazed the wiper motor that thing was cooking! Got a nice red mark on my knuckle just to show how hot it was.
So I immediately recalled what the P.O. had said about the pump. So I waited a few minutes and disconnected the harness, we'll, I tried to at least.....the wires were stuck on there, so much as that the ground terminal for the pump pulled the connector clean out of the pump body. Each of the ground wires were really on there. To make a long story short, I'm assuming that maybe because my alternator tab was broken causing intermittent grounding issues, the wipers were having a hard time finding ground and used the washer pump case as a ground,and heated it up from the voltage. So I just pulled the washer pump ground wire from the switch and harness,no more heat, and I still have my wipers.
Luckily I learned my lesson about throwing out old parts, I had another lower alternator bracket in the garage, also I was able to swap out my belts. Good enough reason for me! Lol

Re: What did you do to your truck today? Chapter II
 

http://i1183.photobucket.com/albums/...5B32E93077.jpg


Sanded it down and applied another coat of epoxy.. I'll let it cure for a week or so before I put it back in the truck

Re: What did you do to your truck today? Chapter II
 

Finally got a week plus of no work and no classes to do some serious work.

Stripped, de-rusted, minor dent/pitting repair and primered the long fleetside to replace the current rust bucket on my truck. That took several days, mostly due to my confined workspace (single car garage).

Today, pulled out the seat, ripped out the rotting carpet and mounted the refurbished gas tank behind the seat.

Re: What did you do to your truck today? Chapter II
 

Double post deleted

Re: What did you do to your truck today? Chapter II
 

More body work :mm:

Re: What did you do to your truck today? Chapter II
 

Swapped the cast iron intake and qjet now I need newer kick down and probably swap to cable throttle while I am at it. Truck barely got out of it's own way before. Feels like it flies now

Re: What did you do to your truck today? Chapter II
 

Painted the top of the dash black. Column is getting painted black next. Just thought with the orange dash, the "Parchment" white visors, door panels, arm rests and seat upholstery will contrast better against the black, carpet, column steering wheel and dash pad.

Re: What did you do to your truck today? Chapter II
 

After

Re: What did you do to your truck today? Chapter II
 

It's too damn cold to be doing much around here but I managed to paint my tie rod ends. I'm about ready to put the front suspension back on and hook up brake lines on drum/disc conversion.

Re: What did you do to your truck today? Chapter II
 

Removed old rusted bed. Assembled and mounted replacement bed. It's not perfect, but it's a HUGE improvement. And the extra weight from the rust-free bed has smoothed out the ride into work.

And now, with the bed out of the garage, I've got more room for activities.

Re: What did you do to your truck today? Chapter II
 

Hi - I am just up the freeway in Vancouver - '68 owner..

Re: What did you do to your truck today? Chapter II
 

Sounds like a really rusted bed for being out in California!

Re: What did you do to your truck today? Chapter II
 

I'll trade you weather anytime.

https://www.theweathernetwork.com/ca...ewan/saskatoon