Re: PO has me PO'd
 

Jaros, I just want to say I appreciate your consistency. As a guy that works in fits and starts, I love seeing people making regular progress! How far are you from running and driving this rig?

Re: PO has me PO'd
 

First off, thank you! It is a labor of love, but being retired it is also a great way to keep my mind and hands busy...

Secondly, I have no idea or plans for that outcome, other then a anniversary coming up in June20th for a celebration of the brand in Harrisburg, Pa. Hope I don't have to trailer it there, EMBARRISING, but, I do want to install a dry sump system, next on the list of to dos

Fits and starts should be my montra

Just walked out of court, beat a speeding ticket for 55mph in a 25mph work zone, pulled the marine corp card and he said" sempre fi"

Re: PO has me PO'd
 

https://farm5.staticflickr.com/4865/...874f2fb3_c.jpg[url=https://flic.kr/p/23u9Kfg]20190108_113522

https://farm8.staticflickr.com/7849/...f054d1a9_c.jpg[url=https://flic.kr/p/2cZz3sj]20190108_113545

secret santa was my daughter in law

Re: PO has me PO'd
 

https://farm8.staticflickr.com/7927/...e9c4eccf_c.jpg[url=https://flic.kr/p/23yjDy2]20190112_064458

sorta ol school....reminds me of my sun tach mount in the '62 chevy

https://farm5.staticflickr.com/4887/...0fe47745_c.jpg[url=https://flic.kr/p/2cLVkzV]20190112_064550

Never heard of a 1/2-150, so looked it up on the www, seems to be a schedule 40 pipe

Re: PO has me PO'd
 

still searching for the right position to mount gauge. using the heater control mount screw (1/4-20) I put a hex drive stud in it with a flange nut.

DON'T use slotted screws that come with the mounting kit, the screw driver will slip and gouge the mount or worse yet your dash

I think I will try to use the other mounting screw for the heater control, since this location looks like it may cause problems with my shifter

https://farm8.staticflickr.com/7836/...10757204_c.jpg[url=https://flic.kr/p/2egy1VX]20190117_102220

Re: PO has me PO'd
 

https://farm5.staticflickr.com/4878/...8bb4a4c3_c.jpg[url=https://flic.kr/p/23F5Fun]20190118_09531

pic of hex drive 1/4-20 studs

https://farm8.staticflickr.com/7887/...bf62972c_c.jpg[url=https://flic.kr/p/2ejmBqq]20190124_090907

https://farm5.staticflickr.com/4828/...48f610c0_c.jpg[url=https://flic.kr/p/2cUMoY6]20190119_095013

Had to machine a slot in the bracket for clearance of serrated flange nuts

looking for my stepper bit to drill pan for weldless bulk head fitting

Re: PO has me PO'd
 

Started to work on my seat mounts(utility) PS

had to locate hole with a punch, used starter bolts and lube

https://farm5.staticflickr.com/4906/...0b073959_c.jpg[url=https://flic.kr/p/2eoiHVm]20190128_093516

https://farm5.staticflickr.com/4867/...8e2fc30b_c.jpg[url=https://flic.kr/p/2dmRq3A]20190128_093452

Have to make up some seat mount plates, one stripped, two non existant for rear of seat brackets...DS

Re: PO has me PO'd
 

sport bucket front mounts won't clear

https://farm8.staticflickr.com/7874/...b607fd81_c.jpg[url=https://flic.kr/p/2es7FPe]20190127_141336

Re: PO has me PO'd
 

boy that truck is getting some serious love .... nice job in getting it together

Re: PO has me PO'd
 

Thanks, up to this time, everything was just a mock up, now, problems have to be solved and final fitment needs to happen. Soooo, that is what is taking place, wish me luck going forward

Re: PO has me PO'd
 

as you can see the angle of the sport buckets have the angle wrong, so it will have to be the utility seat bracket, the keeper bracket is not on the ps, and when done will raise the seat up about 1 1/2"

https://farm5.staticflickr.com/4815/...88d05c21_c.jpg[url=https://flic.kr/p/2dnVHef]20190129_103844

https://farm8.staticflickr.com/7910/...937660bc_c.jpg[url=https://flic.kr/p/23SvT4D]20190129_103358

Re: PO has me PO'd
 

https://farm5.staticflickr.com/4867/...8e2fc30b_c.jpg[url=https://flic.kr/p/2dmRq3A]20190128_093452

PS

Re: PO has me PO'd
 

https://farm5.staticflickr.com/4837/...e0c557a1_c.jpg[url=https://flic.kr/p/23TtUdk]20190130_101754

https://farm5.staticflickr.com/4848/...9d76a019_c.jpg[url=https://flic.kr/p/23TusBP]20190130_103005

taking bolts out, 2 snapped sounds like they may break, so put studs in, will reinstall with lock tite, easy enough to put a torch up there to break bond if need be

X is where the fitting goes, pretty big cavity in trans
https://farm5.staticflickr.com/4857/...01981f38_c.jpg[url=https://flic.kr/p/SmNpbA]20190130_102840

backing plate,

Re: PO has me PO'd
 

They look like McMaster packages :lol:

Re: PO has me PO'd
 

They're great aren't they, one day to my door, if it is in stock. any fastner I can think of! probably should have gotten 12 point, oh well next order

Re: PO has me PO'd
 

Whiskey :30

https://farm5.staticflickr.com/4855/...f65156aa_c.jpg[url=https://flic.kr/p/SnefNo]20190130_203541

Re: PO has me PO'd
 

I like to use a live center when tapping, keeps the threads in proper alignment

https://farm5.staticflickr.com/4860/...95602497_c.jpg[url=https://flic.kr/p/2d8Ugv8]20190201_084147
while raceting tap
Also, I like to use a rachet tap handle,
pulling down on the quill , and rotate cw with tap
https://farm5.staticflickr.com/4860/...95602497_c.jpg[url=https://flic.kr/p/2d8Ugv8]20190201_084147

Re: PO has me PO'd
 

https://farm5.staticflickr.com/4893/...9aa90dc2_c.jpg[url=https://flic.kr/p/2d8Ww5e]20190201_093600

https://farm8.staticflickr.com/7831/...cb777e86_c.jpg[url=https://flic.kr/p/QLqQc2]20190201_093518

Re: PO has me PO'd
 

https://farm8.staticflickr.com/7819/...78cf8a66_c.jpg[url=https://flic.kr/p/2exFCA4]20190202_11

had to find the holes

https://farm8.staticflickr.com/7820/...4615ece7_c.jpg[url=https://flic.kr/p/2d9Vv6B]20190202_111148

Inside mout was hard to hold so I added a 1/4-20 stud in the center

Re: PO has me PO'd
 

found another use for Monkeies wrench....lever

https://farm5.staticflickr.com/4911/...1d1fb37e_c.jpg[url=https://flic.kr/p/2dqPx87]20190201_123025

Re: PO has me PO'd
 

needed spring compressors

https://farm5.staticflickr.com/4811/...dd41d3c5_c.jpg[url=https://flic.kr/p/23WhCJt]20190202_113911[/

Re: PO has me PO'd
 

whiskey :30 or whiskey tango foxtrot

https://farm8.staticflickr.com/7885/...16f380fd_c.jpg[url=https://flic.kr/p/2eAd9Kv]20190204_201344

https://farm8.staticflickr.com/7868/...5d96dd54_c.jpg[url=https://flic.kr/p/2evBvzS]20190204_201429

https://farm8.staticflickr.com/7900/...30885f05_c.jpg[url=https://flic.kr/p/2dcrRac]20190204_20163

Re: PO has me PO'd
 

Bottoms up..Jim:)

Re: PO has me PO'd
 

Thanks Jesse
Decided to put on the seat backs, ss#10x 3/4" screws, I hate phillip head screws, ordered some square drive today from Mcmaster Carr

I watch a show on Utube and he says to wax paint and rusty metal with tolette bowl wax(new) ring . So for 6.00 , I thought I would try it on my seat backs. Keeps the patina I was looking for, but protects the metal from further rust

https://farm8.staticflickr.com/7875/...dd7759cd_c.jpg[url=https://flic.kr/p/2dvKjEu]20190206_085314

pics don't want to load

Re: PO has me PO'd
 

https://farm8.staticflickr.com/7893/...ab95ed19_c.jpg[url=https://flic.kr/p/2exajDJ]20190206_085341