The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   What did you do to your truck today! (https://67-72chevytrucks.com/vboard/showthread.php?t=401176)

tommys72 09-02-2012 03:18 PM

Re: What did you do to your truck today!
 
4 Attachment(s)
new original steering wheel and new radio put in the ole girl...now just gotta put in the carpet, gas tank carpet and new seat cover. and got some 8 inch rallys not to long ago

Tom Vogel 09-02-2012 04:04 PM

Re: What did you do to your truck today!
 
2 Attachment(s)
Exhaust completed... well, except for Jet Hot.

Pont406 09-03-2012 01:54 AM

Re: What did you do to your truck today!
 
2 Attachment(s)
Quote:

Originally Posted by Southern Shaker (Post 5570519)
hey man what color is that on your valve covers?

Don't know. What ever Moroso coats them with. I had a choise of gold, red and blue, I picked blue.

Headers are in.

ItsRandy 09-03-2012 02:03 AM

Re: What did you do to your truck today!
 
Changed the oil and filter, also took the front coil springs out and cut 1/4 coil off trying to lower the front end 1"...it went down maybe 1/2".

mud.man.rj 09-03-2012 02:20 AM

Re: What did you do to your truck today!
 
One loop is 2" drop.

VDOG 09-03-2012 01:33 PM

Re: What did you do to your truck today!
 
Quote:

Originally Posted by ItsRandy (Post 5571769)
Changed the oil and filter, also took the front coil springs out and cut 1/4 coil off trying to lower the front end 1"...it went down maybe 1/2".

Make sure you post a pic Randy, I wanted to do the samething but was not sure if I should just go with drop spindles and new coils.

69GWC 09-03-2012 06:04 PM

Re: What did you do to your truck today!
 
Painted my clutch/brake/gas and E brake pedals the steering column and both shifter shafts today.

http://i191.photobucket.com/albums/z...y/IMAG0158.jpg

ItsRandy 09-03-2012 11:43 PM

Re: What did you do to your truck today!
 
2 Attachment(s)
Quote:

Originally Posted by VDOG (Post 5572360)
Make sure you post a pic Randy, I wanted to do the samething but was not sure if I should just go with drop spindles and new coils.

Ok...so I took the front end apart again today and cut another 1/4 coil off the front coil springs, 1/2 coil cut off total, this brought it down about 1 more inch. This is 2" drop spindles and 2" drop coils with 1/2 coil cut off. It started out as a 4/6 drop spindle/spring kit. What do you think? Cut more? Leave it alone?

magwakeenercew2jh 09-04-2012 12:02 AM

Re: What did you do to your truck today!
 
Quote:

Originally Posted by ItsRandy (Post 5573576)
Ok...so I took the front end apart again today and cut another 1/4 coil off the front coil springs, 1/2 coil cut off total, this brought it down about 1 more inch. This is 2" drop spindles and 2" drop coils with 1/2 coil cut off. It started out as a 4/6 drop spindle/spring kit. What do you think? Cut more? Leave it alone?

I love your truck. But I wouldn't venture an opinion on the stance unless you parked it on the flat on the street
(like across the street from the driveway and under the palm tree), and took a long shot to check it out.

No matter. The truck is wonderful at any stance.

But that way, we'd get to see another nice shot of your truck, too. :metal:

jayman68 09-04-2012 12:06 AM

Re: What did you do to your truck today!
 
2 Attachment(s)
I cut down the jungle around the truck, and cleaned up the scrap. Gotta make a recycle run to get money to put toward the truck.

78bronzechariot 09-04-2012 12:20 AM

Re: What did you do to your truck today!
 
Quote:

Originally Posted by Pont406 (Post 5570065)
Got the motor in. With aluminum parts truck is a little higher now but it's still missing a lot of parts.

Diggin the Pontiac!

street_rodder 09-04-2012 03:58 AM

Re: What did you do to your truck today!
 
Weeks 3 and 4 and this is what was accomplished!

http://i737.photobucket.com/albums/x...fore-After.jpg

street_rodder 09-04-2012 04:03 AM

Re: What did you do to your truck today!
 
Quote:

Originally Posted by Pont406 (Post 5570065)
Got the motor in. With aluminum parts truck is a little higher now but it's still missing a lot of parts.

I am all up and in love with your "engine decision"!!

Being a Looooooooong time Pontiac Nut.....this is EXACTLY what I will be doing to my 68 GMC.

Although minus the aluminum heads....I am building a 1970 Pontiac 455 HO engine with its original #64 heads for the 68 now...!!

Keep me up to date with your project!!! Love it! :metal:

Billett 09-04-2012 09:09 AM

Re: What did you do to your truck today!
 
Quote:

Originally Posted by jayman68 (Post 5573621)
I cut down the jungle around the truck, and cleaned up the scrap. Gotta make a recycle run to get money to put toward the truck.

May not be truck related but I bet that was a hell of a lot of work!

I came out to this today :(

http://i1130.photobucket.com/albums/...-25-14_256.jpg

http://i1130.photobucket.com/albums/...-36-12_644.jpg

That didn't last as long as I hoped it would...

DevilDog Aggie 09-04-2012 09:26 AM

Re: What did you do to your truck today!
 
Wasn't today but Saturday. Got the e-brake fixed. Bad cable and linkage. Then got the timing straightened out. Somewhat. Runs better, but still sucking gas. It will backfire through the carb when it is still cold while you are under throttle, but once warmed up she runs great. Not sure where to proceed from there. Still have a minor dieseling problem as well. Not near as bad as before but still there.

Bennett68C10 09-04-2012 01:03 PM

Re: What did you do to your truck today!
 
Quote:

Originally Posted by ItsRandy (Post 5573576)
Ok...so I took the front end apart again today and cut another 1/4 coil off the front coil springs, 1/2 coil cut off total, this brought it down about 1 more inch. This is 2" drop spindles and 2" drop coils with 1/2 coil cut off. It started out as a 4/6 drop spindle/spring kit. What do you think? Cut more? Leave it alone?

I think the stance looks great, I would leave it like that
Posted via Mobile Device

LEX 09-04-2012 01:33 PM

Re: What did you do to your truck today!
 
Took 4 steelies to get blasted. Painting them tomorrow.

Hard Luck 09-04-2012 02:10 PM

Re: What did you do to your truck today!
 
5 Attachment(s)
Let's see. Five lug conversion, new brake all around, got all five new wheels mounted, and had new tonneau cover made.

magwakeenercew2jh 09-04-2012 02:23 PM

Re: What did you do to your truck today!
 
Quote:

Originally Posted by Hard Luck (Post 5574362)
Let's see. Five lug conversion, new brake all around, got all five new wheels mounted, and had new tonneau cover made.

Is THAT all? :lol:

Beautiful!

Pont406 09-04-2012 10:22 PM

Re: What did you do to your truck today!
 
3 Attachment(s)
Quote:

Originally Posted by street_rodder (Post 5573779)
I am all up and in love with your "engine decision"!!

Being a Looooooooong time Pontiac Nut.....this is EXACTLY what I will be doing to my 68 GMC.

Although minus the aluminum heads....I am building a 1970 Pontiac 455 HO engine with its original #64 heads for the 68 now...!!

Keep me up to date with your project!!! Love it! :metal:

Thanks,
it's getting close. Just needs an exhaust. It will get 3" x-pipe set up and spintech mufflers.

ItsRandy 09-04-2012 11:14 PM

Re: What did you do to your truck today!
 
1 Attachment(s)
Quote:

Originally Posted by magwakeenercew2jh (Post 5573612)
I love your truck. But I wouldn't venture an opinion on the stance unless you parked it on the flat on the street
(like across the street from the driveway and under the palm tree), and took a long shot to check it out.

No matter. The truck is wonderful at any stance.

But that way, we'd get to see another nice shot of your truck, too. :metal:

I installed 2 6X9 4 way speakers in my doors today and here is the picture on the flat street, under the palm tree, in front of the driveway you suggested I take (it was getting dark when I took the picture). What do you think?

magwakeenercew2jh 09-04-2012 11:19 PM

Re: What did you do to your truck today!
 
Quote:

Originally Posted by ItsRandy (Post 5575408)
I installed 2 6X9 4 way speakers in my doors today and here is the picture on the flat street, under the palm tree, in front of the driveway you suggested I take (it was getting dark when I took the picture). What do you think?

To me...to my personal taste...that is stupendous.
A PERFECT stance.

ItsRandy 09-04-2012 11:25 PM

Re: What did you do to your truck today!
 
Quote:

Originally Posted by magwakeenercew2jh (Post 5575415)
To me...to my personal taste...that is stupendous.
A PERFECT stance.

Thank you! I like it too.

jayman68 09-05-2012 12:50 AM

Re: What did you do to your truck today!
 
Quote:

Originally Posted by Billett (Post 5573932)
May not be truck related but I bet that was a hell of a lot of work!

I came out to this today :(


That didn't last as long as I hoped it would...

It was working towards working on my truck, so that works for me.:)
And yes it was a lot of work.

Hope you can get the muffler fixed easily.

Z10 09-05-2012 12:52 AM

Re: What did you do to your truck today!
 
Quote:

Originally Posted by ItsRandy (Post 5575420)
Thank you! I like it too.

I like that a lot. Great looking truck.

DevilDog Aggie 09-05-2012 08:00 AM

Re: What did you do to your truck today!
 
1 Attachment(s)
Replaced the brake booster and master cylinder. Thanks to everyone yesterday for all the great bench bleeding advice!

69GWC 09-05-2012 05:54 PM

Re: What did you do to your truck today!
 
oh its the little things sometimes.. :)

chrome tailgate handle, nice LMC trucks is on my way home..lol
http://i191.photobucket.com/albums/z...y/IMAG0161.jpg

magwakeenercew2jh 09-05-2012 09:54 PM

Re: What did you do to your truck today!
 
3 Attachment(s)
Quote:

Originally Posted by 69GWC (Post 5576512)
oh its the little things sometimes.. :)

chrome tailgate handle, nice LMC trucks is on my way home..lol

Well, 69GWC, you made me go to work this evening. I broke out my LMC "bottom" trim, measured twice, and cut it.
(Sidebar: I wish LMC wouldn't ship with all that nasty "popcorn"....What a mess to chase those kernels that got away around the driveway).

So, it was just me, 3M, a fine file, the band saw, some anti-scuff tape for the cuts. Here's the end result...BTW, I had previous trim problems and didn't want to drill holes in the tail gate.
However, the stock chrome center piece needed to be screwed on for various reasons.

This is all pre-paint. So, the mock up is done. Maybe for a few years. The SS strips are on there rock-solid with two runs of 3M 7/8" double stick trim tape.

69GWC 09-05-2012 10:03 PM

Re: What did you do to your truck today!
 
Ah looks good, I will put That same trim on mine at some point.
Posted via Mobile Device

shopking72 09-05-2012 10:33 PM

Re: What did you do to your truck today!
 
Last thing I did was drive it to Black Top Nationals :)
http://i32.photobucket.com/albums/d3...824_212236.jpg

nlped 09-05-2012 10:34 PM

Re: What did you do to your truck today!
 
^^^wicked SEXY!!!
Posted via Mobile Device

mud.man.rj 09-06-2012 12:41 AM

Re: What did you do to your truck today!
 
Wicked is right,looks like a million bucks.:mm:

Gonepostal 09-06-2012 12:50 AM

Re: What did you do to your truck today!
 
Had to replace a starter cause I thought it was bad only to find out it was a short in the positive cable that was on the headers wife said it was a shower of sparks as she was following me home then all went south both cables burned in half and no lights on a dark road is not a fun thing found a driveway and had to flatbed it home oh well time for a rewire the price we pay for our toys

magwakeenercew2jh 09-06-2012 12:53 AM

Re: What did you do to your truck today!
 
Glad you're safe.
Posted via Mobile Device

DevilDog Aggie 09-06-2012 09:42 AM

Re: What did you do to your truck today!
 
Quote:

Originally Posted by Hubscrub (Post 3960169)
painted driver side inner fender

I love your signature!!!! I used to get up every Sunday morning and watch Sunday Morning with him. Plus his "On The Road" specials were great!!!

DevilDog Aggie 09-06-2012 09:48 AM

Re: What did you do to your truck today!
 
Quote:

Originally Posted by shopking72 (Post 5577031)
Last thing I did was drive it to Black Top Nationals :)
http://i32.photobucket.com/albums/d3...824_212236.jpg

She is awesome!!! I love that color and the wheels!!!

shopking72 09-06-2012 09:56 AM

Re: What did you do to your truck today!
 
Quote:

Originally Posted by DevilDog Aggie (Post 5577636)
She is awesome!!! I love that color and the wheels!!!

Thanks! Color looked good in the lights inside I thought :)

Dunenutt 09-06-2012 11:05 AM

Re: What did you do to your truck today!
 
1 Attachment(s)
Clunk, Bang, Pop, Pop...

Had some ball joint issues, but they are gone now.

Installing crossover steering as soon as I get it buttoned up.

shawno72 09-06-2012 11:21 AM

Re: What did you do to your truck today!
 
2 Attachment(s)
Just used it as a truck:metal:
Attachment 981220

Attachment 981221

prairewolf 09-06-2012 10:51 PM

Re: What did you do to your truck today!
 
1 Attachment(s)
by default last week the 67 inherited some 20's, ... baught Wife's Denali new 20'' Michelins and I ended up with the BF Goodies. ... the used tires have 50%tread left if I kid myself a little so they will work. ... now I get to use tire/rim thread search. .... leaning towards custom made 20'' steelies but financial reality might kabosh that.:lol:...time will tell... thanks for listening, life is good,kent


All times are GMT -4. The time now is 12:00 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com