![]() |
Re: What did you do to your truck today.The 3rd chapter
Wrapped up the installation of a Kicker 10” hideaway under seat subwoofer. The previous owner cut the doors to make way for 2 6x9s in each door, all of which I upgraded recently. Sound on them is ok but not quite full enough so with the addition of the sub, it sounds a lot better. I still prefer that rumble of the MagnaFlows, but having a good sounding stereo is a bonus.
Purchased it from Crutchfield, sales rep Dwayne. Strong recommend if you’re ready to upgrade yours. |
Re: What did you do to your truck today.The 3rd chapter
Quote:
Everybody like to knock their PO for cutting holes in the doors, but I've had my C/10 Stepside since 6/1973, so I'm the guy who wanted a stereo in his truck. But I did go with single 5.5'' speakers because I thought the 6x9s cut away too much steel. :chevy: |
Re: What did you do to your truck today.The 3rd chapter
2 Attachment(s)
Old blue ran errands for the 73
Tired of this never ending 4L80 project. |
Re: What did you do to your truck today.The 3rd chapter
Quote:
:gmc2: |
Re: What did you do to your truck today.The 3rd chapter
Need front sway bar, want OEM type for 67.
|
Re: What did you do to your truck today.The 3rd chapter
double post
|
Re: What did you do to your truck today.The 3rd chapter
Quote:
Quote:
|
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
Finished painting the cab, cowl, fenders, doors, and hood this past weekend.
|
Re: What did you do to your truck today.The 3rd chapter
Quote:
|
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
Today I applied what I hope is the last coat of paint on the 67 steering wheel I restored. I started working on it 4 years ago but got side tracked working higher priority projects.
|
Re: What did you do to your truck today.The 3rd chapter
Quote:
|
Re: What did you do to your truck today.The 3rd chapter
Quote:
|
Re: What did you do to your truck today.The 3rd chapter
Quote:
|
Re: What did you do to your truck today.The 3rd chapter
Just remember that it's a paint chip in a catalog and not actually a furriner color! :lol: When I painted my '56 Chevy wagon, I let my wife pick the blue color painted lower part from the Ditzler book. Could have just as easily gotten the turquoise for that year, but I'd already picked good old GM #11 for the white instead of the cream color. ;)
|
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
Loading up to go to Tennessee leaving in the morning
|
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
For a bit now my battery meter hasn't moved, finally bugged me enough to check the fuses, when I pulled the driver's side apart the glass separated. I stuck in a normal one in (which is way to long) but that allowed the battery meter to come back alive.
I wanted to get Littelfuse SFE4BP SFE, but got Bussmann Division SFE-4 Auto because they'll come in tomorrow (via Amazon). Hopefully it will fit properly! After that, I'll not drive or see my truck for awhile - which makes me sad. I'm having to move to Atlanta, Ga on Saturday to keep my position at WarnerBros. Discovery (my remote work status was revoked) and I must report to the campus there. My youngest will be keeping up the house here in Texas, while I hunker down in a little apartment. Kind of sucks but I am trying to see it as an adventure. After being here in my home for nearly 25 years and twice as long in Texas, it surely will be different. Here's the truck, nicely tucked with her cover on to keep the dust off while I am away. See you labor day or perhaps Thanksgiving Good 'O Truck! :'( |
Re: What did you do to your truck today.The 3rd chapter
Good luck with everything Richard, that sux
|
Re: What did you do to your truck today.The 3rd chapter
Quote:
|
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
Quote:
|
Re: What did you do to your truck today.The 3rd chapter
2 Attachment(s)
Today I installed an alternator bracket that I lengthened and modified to work with my M/T valve covers. I made a temporary one a couple of years ago until I had a way to heat/bent metal to match the curve needed to clear the alternator. This was a good project to justify an oxy/acetylene torch for the garage.
|
Re: What did you do to your truck today.The 3rd chapter
Quote:
It’s really something how those two fuses cover a lot of territory of the truck. The ole glass fuses and OE fuse panel are still going strong on my 72’ :metal: Now back to the thread: I ordered a tri fold tonneau cover for my 8ft C10 bed. |
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
Spal 16 inch pusher fan came today . This is for the 72 even though I put a new Cold case radiator in it and it never got over 190 on my trip to Tennessee I wanted it for towing and will come in handy when I install the AC
|
Re: What did you do to your truck today.The 3rd chapter
3 Attachment(s)
Got these back from Mike at brakeboosters.com, very pleased with the work!
|
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
.
Replaced the 2nd gear servo in my 700r4 with the "Corvette" upgrade. The goal was to tighten up the 1-2 shift. Once removed, the size of the opening in the divider ring at about 2.3 inches revealed that the one installed was not the weakest servo (4-cyl, v6) but the second weakest (v6-v8) of the stock GM servos. I purchased just the upgrade kit and so had to disassemble and reassemble replacing the divider ring and its mate with the parts from the kit. Best 27 dollars I've spent on the truck! No other bang for the buck will come close to this. Holy Bjeezus man this thing shifts so much more to my liking now. -Kevin |
Re: What did you do to your truck today.The 3rd chapter
2 Attachment(s)
Got the bed covered up.
Extang Trifecta 2.0 Tri-Fold Tonneau |
Re: What did you do to your truck today.The 3rd chapter
Nice!
|
Re: What did you do to your truck today.The 3rd chapter
Thanks Bill, really happy with the fit. :chevy:
|
Re: What did you do to your truck today.The 3rd chapter
That does look nice. Looks like it goes all the way to the edge of the flat section covering up stake pocket holes. So many dont.
|
Re: What did you do to your truck today.The 3rd chapter
Thanks Mark. I was concerned about the dimensions and fit because it is listed for a square body 1973 to 1986 truck.
I asked the manufacturer for specific dimensions and they wouldn’t/couldn’t offer any. :crazy::confused: I wanted to cover the stake pockets and was told it did. This fits our year trucks great width and length wise. :metal: |
Re: What did you do to your truck today.The 3rd chapter
Quote:
I think I might have to get me one of these |
Re: What did you do to your truck today.The 3rd chapter
4 Attachment(s)
New shift shaft seal on the th350 . I had this rebuilt about two years ago either they used a cheap seal or never replaced it . The rubber was hard as a rock . The PMD products puller worked flawlessly . Took about 10 minutes start to finish the silver tool is the seal driver .
|
Re: What did you do to your truck today.The 3rd chapter
Well done Mark, my guess is they never replaced the seal before ........
|
Re: What did you do to your truck today.The 3rd chapter
Quote:
Drove it about 20 miles today . Not a drip to be found I’ll check it again in the morning |
Re: What did you do to your truck today.The 3rd chapter
I finally remembered to put a 4A fuse in my ammeter. Better take the rest of the week off now ;-)
|
Re: What did you do to your truck today.The 3rd chapter
2 Attachment(s)
New valve covers, not a lot of options for center bolt vortec heads.
|
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
All loaded up for the Carlisle truck show swap meet not bringing much this time . Nice not having to worry about stuff getting wet out the new cover on
|
Re: What did you do to your truck today.The 3rd chapter
Is the show this weekend?
|
Re: What did you do to your truck today.The 3rd chapter
Quote:
|
Re: What did you do to your truck today.The 3rd chapter
Great.......thanks for the update Mark.
|
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
Quote:
|
All times are GMT -4. The time now is 04:39 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com