Re: PO has me PO'd
Looks good Jim. You can see the finish line from there.
|
Re: PO has me PO'd
Thanks Bud for following along all these years, and yes I am getting excited again to see the end and drive it, still alot of systems to get working once I get it back to my shop
|
Re: PO has me PO'd
Any one know what thread and pitch goes into this, since these gas pigs get 9-10 MPG I what to add a aux. tank
https://live.staticflickr.com/65535/...24f5ecb2_c.jpg[url=https://flic.kr/p/2hmATrj]20190927_083327 |
Re: PO has me PO'd
Jim,
Are you talking about the screw that holds the handle on? I can pull one out later today and take a look (I think i still have one) Are you going with an in bed style tank or under body? I might be able to hook you up with some in bed hickey tanks if needed. Richard |
Re: PO has me PO'd
Quote:
|
Re: PO has me PO'd
OK for the hell of it, took the fittings off. and this is what I find. future date with my ultra sonic cleaner
https://live.staticflickr.com/65535/...13b73343_c.jpg[url=https://flic.kr/p/2hmZtSk]20190928_090709 |
Re: PO has me PO'd
It's interesting to see the valve opened up. If that one doesn't work for any reason I think these are still available new and I recall seeing them for marine applications. I don't know the Hickey tank dimensions but FWIW I had a Blazer with a period correct 40 gallon tank, which I think can still be had.
|
Re: PO has me PO'd
4 Attachment(s)
Jim
My screw is 8-32 and about 1/2" long Phillips countersunk head like these https://www.mcmaster.com/91802a194 Here is a picture or 2 of the actual tanks I am talking about. I am not 100% he is ready to sell, nor price but I can ask him if you are interested and put you in contact . |
Re: PO has me PO'd
2 Attachment(s)
Forgot pics of the screw
. |
Re: PO has me PO'd
Quote:
Just saw a 38 gallon go up for sale by CIblazer, not quite what I had in mind, looking to have a diamond plate one made up to fit in the area of my bulk head area. Thanks for the tip on buying a new one , if this one fails Man, you talk about a varnish build up, can you imagine what his carb. looks like |
Re: PO has me PO'd
Richard, thanks for the info. and link. pics sure help as now I know location to mount the valve.
Not sure yet on tanks, but if they are available I would consider them, if the price is right. Thank you for your time |
Re: PO has me PO'd
I'd change it if possible. I'll take the snow and cold over the crime in ABQ any day. It helps that I can start my daily driver from my phone - toasty when I climb in :)
|
Re: PO has me PO'd
Quote:
Any way, got the valve apart, wasn't bad inside, the shaft may be worn https://live.staticflickr.com/65535/...7955b483_c.jpg[url=https://flic.kr/p/2hnC6sk]20190929_114126 these Q tips work great, but the carb cleaner, Is under high pressure,use PPE. If you hit a deadend this sh!t is coming back at you and it BURNS |
Re: PO has me PO'd
This is my new system to pump fuel
https://live.staticflickr.com/65535/...bf680d4e_c.jpg[url=https://flic.kr/p/2hojACa]20190930_180411 https://live.staticflickr.com/65535/...01d493e3_c.jpg[url=https://flic.kr/p/2honfst]20190930_180314 |
Re: PO has me PO'd
Looks to be from an 03+ chevy truck with built in regulator
|
Re: PO has me PO'd
you got it right litebulblsc
new fuel system https://live.staticflickr.com/65535/...c5c12d11_c.jpg[url=https://flic.kr/p/2hp6Aar]20191002_093933 |
Re: PO has me PO'd
was at the shop today, installed radiator, stood back and looked at it. Not impressed with the routing of the hoses, or how I cobbled them together...
Update needed to resolve. ordered some SS pipe, clamps and sleeves. will have to wait for the pcs. to come in, worst part of a build is waiting on parts |
Re: PO has me PO'd
Picked up this little beauty on the partsboard, thanks Wayne G.,quality with/out reproach, and yes the valve functions as expected, even hits the detents as expected
https://live.staticflickr.com/65535/...54fea129_c.jpg[url=https://flic.kr/p/2hqnQyi]20191005_074950 Once I find my power cord, I'll run it thru the ultra sonic |
Re: PO has me PO'd
Nice! Thanks for the pic! ;)
|
Re: PO has me PO'd
Got some new ideas for my coolant system, picked up the mandrel 'J' bend, cut to fit. also silacon sleeves and clamps
https://live.staticflickr.com/65535/...20ebc6f6_c.jpg[url=https://flic.kr/p/2hrBYnf]20191007_121102 https://live.staticflickr.com/65535/...d953af5c_c.jpg[url=https://flic.kr/p/2hrBYnq]20191007_121145 https://live.staticflickr.com/65535/...bc0f8753_c.jpg[url=https://flic.kr/p/2hrFm1y]20191007_131600 as you can see a bit cobbled, new system should work much better |
Re: PO has me PO'd
https://live.staticflickr.com/65535/...7696e729_c.jpg[url=https://flic.kr/p/2hs66mF]20191008_105316
tensioner to short |
Re: PO has me PO'd
Quote:
You're a machinist, get a chunk of aluminum, and make a longer one. |
Re: PO has me PO'd
Quote:
plus I would have to buy LH and RH taps But, thanks for the thoughts |
Re: PO has me PO'd
All tiged up ready for install,even added a rib to keep the hose and clamp on
https://live.staticflickr.com/65535/...b03c5fe4_c.jpg[url=https://flic.kr/p/2hsDRuC]20191009_123156 https://live.staticflickr.com/65535/...9342b8bb_c.jpg[url=https://flic.kr/p/2hsHAGN]20191009_130033 I'll leave the polish for later |
Re: PO has me PO'd
seems like the first 75 pages are being held hostage by photo bucket, see if I can fix it
|
All times are GMT -4. The time now is 10:04 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com