The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)
-   -   What did you do to your truck today? (https://67-72chevytrucks.com/vboard/showthread.php?t=368988)

A.T. RockDriller 04-13-2012 10:36 PM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by MisterC (Post 5310584)
Thanks Chris. I appreciate the comment. She'd kill me if she knew I'd posted that pic. lol

Understood.
But thanks for lettin' us see what motivates you.

For the most part....as you know.....on this site, when we all say "She's beautiful".....we're talkin about your truck.

losthope 04-13-2012 11:19 PM

Re: What did you do to your truck today?
 
Sand casted a plaque for my truck,theres more photos of the process in my build thread:
http://i70.photobucket.com/albums/i9...2/DSC04881.jpg

markeb01 04-14-2012 01:44 AM

Re: What did you do to your truck today?
 
Installed a rather disappointing gas pedal trim. At least it now looks like a complete set.

1971 GMC SHORTY 04-14-2012 09:05 AM

Re: What did you do to your truck today?
 
Got My Battery Ripped Off....
Bastards... Tore My Cables Up....:devil:
Posted via Mobile Device

steve'62 04-14-2012 10:32 AM

Re: What did you do to your truck today?
 
Nice build man I like your style!
Posted via Mobile Device

glos55 04-14-2012 10:42 AM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by 1971 GMC SHORTY (Post 5312817)
Got My Battery Ripped Off....
Bastards... Tore My Cables Up....:devil:
Posted via Mobile Device

How can people do this crap??????

shrunken66stroker 04-14-2012 11:34 AM

Re: What did you do to your truck today?
 
1 Attachment(s)
I used it as a saw horse. Only temporary till I get the other one painted.

glos55 04-14-2012 12:00 PM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by Bardahl (Post 5122406)
I started the body work on my 68 Chevy and :gmc2::chevy:I bought them a new stable mate, 6 cyl. PS, and shoulder belts, it is really fun to drive, I haven`t had a Nova in 10-12 years and could not pass it up for the price !!http://i733.photobucket.com/albums/w...s/PICT1555.jpg

Really like this car!! I just bought a 72 off from Craigs List. It's under restoration now.

A.T. RockDriller 04-14-2012 05:30 PM

Re: What did you do to your truck today?
 
1 Attachment(s)
Quote:

Originally Posted by glos55 (Post 5313055)
Really like this car!! I just bought a 72 off from Craigs List. It's under restoration now.

Shoot, glo....
That looks to be a real clean lil Nova....Blue vinyl and matching interior.
That's got a ton of potential.

It looks like those are Oregon plates....
Did ya buy locally or drive cross country...?

As far as my truck goes....I took the '66 and brought home a generator for a special project....and then...I also used it as a saw-horse.

SRVBLUES64 04-14-2012 05:40 PM

Re: What did you do to your truck today?
 
well I ve been battling this carb all day a new holley avenger gas in th bowl but not jetting anybody have any dynomite:devil:

66-PMD-GMC 04-14-2012 06:11 PM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by A.T. RockDriller (Post 5313528)

As far as my truck goes....I took the '66 and brought home a generator for a special project....and then...I also used it as a saw-horse.

That red GMC is kick a---- .. ah er nice!!!:metal: I love that big truck

A.T. RockDriller 04-14-2012 08:03 PM

Re: What did you do to your truck today?
 
Thanks Chris.

61_FL_Apache 04-14-2012 08:43 PM

Re: What did you do to your truck today?
 
I installed my lower ball joints today!! what a task that was.. Im glad the last ones lasted 50 years, I hope these do :)

http://i166.photobucket.com/albums/u...0/IMG_1073.jpg

Woogeroo 04-14-2012 09:17 PM

Re: What did you do to your truck today?
 
http://67-72chevytrucks.com/gallery/...G_0014turn.jpg

Round two of Woogeroo vs. the Fuel Pump...

2nd fuel pump of the week... this aggravation makes me want to put a block in it that has a mechanical fuel pump!!!

(this engine block came in it)

The Easter parking lot install fuel pump was leaking from the body molding of the pump, or something really weird!

I used a excess piece of heater hose cut into two, 'C' clip shaped covers to protect the fuel line from the grips... worked great, just a little bit of fuel came out into my bucket. YAY.

The difference in road side and driveway repairs is the amount of tools you have!

I hope this one doesn't leak!



-W

shortbed70 04-14-2012 10:10 PM

Re: What did you do to your truck today?
 
Took my truck to a show and had a great time. Can't post pics from iPhone though!!
Posted via Mobile Device

MisterC 04-14-2012 11:31 PM

Re: What did you do to your truck today?
 
Installed the new ECE 2" drop coils in the front. Sway bar and rear coils tomorrow. I'll post some pics then.
Posted via Mobile Device

StepAside 04-14-2012 11:32 PM

Re: What did you do to your truck today?
 
2 Attachment(s)
gauges baby! Painted the dash and then put the gauges in...Took'r for a spin today too...Man Im ready for small town weekend...First Week of June in El Reno...All you Okies should come..Any Ideas on what to do with my holes in the dash??? I made some aluminum void plates today but Im not sure If I like them or not..:metal:

66ChevyMax 04-14-2012 11:49 PM

Re: What did you do to your truck today?
 
Got the cab striped down.

http://i1178.photobucket.com/albums/...14Apr12021.jpghttp://i1178.photobucket.com/albums/...14Apr12022.jpg
http://i1178.photobucket.com/albums/...14Apr12024.jpghttp://i1178.photobucket.com/albums/...14Apr12025.jpg

Posted via Mobile Device
Posted via Mobile Device
Posted via Mobile Device

mud.man.rj 04-15-2012 01:03 AM

Re: What did you do to your truck today?
 
Finished rewelding my pass side rocker on properly and repaired floor mount then sealed/primed and undercoated the bottom of pass side floor and inner rocker then fitted my door so it is close but need a bit more hinge work, the new busings helped too, will post pics when done door.

markeb01 04-15-2012 02:09 AM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by Woogeroo (Post 5313934)
http://67-72chevytrucks.com/gallery/...G_0014turn.jpg

Round two of Woogeroo vs. the Fuel Pump...

2nd fuel pump of the week... this aggravation makes me want to put a block in it that has a mechanical fuel pump!!!

(this engine block came in it)

The Easter parking lot install fuel pump was leaking from the body molding of the pump, or something really weird!

I used a excess piece of heater hose cut into two, 'C' clip shaped covers to protect the fuel line from the grips... worked great, just a little bit of fuel came out into my bucket. YAY.

The difference in road side and driveway repairs is the amount of tools you have!

I hope this one doesn't leak!

-W


I really sympathize with you. Over the years I’ve had a variety of electric fuel pumps from dirt cheap to very expensive. Regardless of brand, type or orientation of filters I’ve never owned one that didn’t fail – eventually. I’d love to have an electric pump right now to assist in starting after the truck sits for several days, but I just can’t tolerate the dependability of electric pump failures.

By comparison, my mechanical pump has been in place for 20 years and still works fine.

Woogeroo 04-15-2012 02:14 AM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by markeb01 (Post 5314492)
I really sympathize with you. Over the years I’ve had a variety of electric fuel pumps from dirt cheap to very expensive. Regardless of brand, type or orientation of filters I’ve never owned one that didn’t fail – eventually. I’d love to have an electric pump right now to assist in starting after the truck sits for several days, but I just can’t tolerate the dependability of electric pump failures.

By comparison, my mechanical pump has been in place for 20 years and still works fine.

Yep, if I ever put another engine in it, I will more than likely get an older one with the mechanical pump on the side like the SBC engineer team from the 1950's intended. ;)

-W

p.s. read my truck site in sig line if ya want details about my plain jane motor.

oldsnakebite 04-15-2012 06:27 PM

Re: What did you do to your truck today?
 
1 Attachment(s)
Install new rear cross sill on my 64

CRGRS 66 04-15-2012 10:00 PM

Re: What did you do to your truck today?
 
Fixed the interior light, learned in the process that the light switch needs replacing. Looped my heater hoses together so that my next job can be to remove and restore the heater box.

Hey, can I just plug the heater inlet/outlet at the water pump?

Also, installed a new steering wheel, the old walnut wheel was coming apart a bit ( got a few nasty pinches from that one). Not thrilled with how that turned out. Previous owner installed a horn button on the steering column, when I got it all back together the horn just wants to blow. Must be a short that he had and didn't want to spend the time on. Will need to pull it all apart again and find the trouble.

First real day in the grudge with my new toy:clap:

lwb66step 04-15-2012 10:17 PM

Re: What did you do to your truck today?
 
Repaired the exhaust, set idle and cruised to the strawberry festival
Posted via Mobile Device

markeb01 04-15-2012 10:26 PM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by CRGRS 66 (Post 5315987)
Hey, can I just plug the heater inlet/outlet at the water pump?

Yes you can. Just install a correct size pipe plug in both the water pump and the intake manifold. The engine and water pump don't care if they are connnected to a heater or not.

MisterC 04-15-2012 10:30 PM

Re: What did you do to your truck today?
 
1 Attachment(s)
I got my front sway bar installed. It took me much longer than I expected so I never got to the rear coils. Still need to cinch all of the mounts up, but here is the bar and the new front coils. I love how it sits now.:metal:

dantimdad 04-15-2012 10:31 PM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by CRGRS 66 (Post 5315987)
Hey, can I just plug the heater inlet/outlet at the water pump?

You sure can. Just pick up some 1/2 pipe plugs. I bought the recessed kind. Work like a charm and really cleaned up my heaterless engine bay.

BTW, I got my electric fan conversion almost done. Just need to put the relay in.

I also sanblasted, primed and painted all of the pulleys and brackets on the engine this weekend. I used single stage gloss black from dupont.

Steven

suzq044 04-15-2012 10:38 PM

Re: What did you do to your truck today?
 
I didnt even kno they made swaybars for these trucks o_O

MisterC 04-15-2012 10:41 PM

Re: What did you do to your truck today?
 
Most of the aftermarket guys do. I'm too cheap so I got a 1 1/4" bar off of a 78 1 ton at the Pick 'n Pull. I bought the mounting bracket from Early Classic Enterprises and got the bushings from Ebay. All in all, I have less than $80 into it. Just had to drill a couple of holes in the frame.

chevy_man5 04-15-2012 10:45 PM

Re: What did you do to your truck today?
 
4 Attachment(s)
Took mine for the first drive in almost 10 years! It was only down the road a bit and back, but it was under her own power!

Still having issues with the clutch, timing, brakes, and electrical, but it's moving along!!

Took the hose to it too, so we don't get dirty every time we just look at it.

She looks good sitting in the sun!

Not going to get very far with that gas tank though! LOL

CRGRS 66 04-15-2012 10:53 PM

Re: What did you do to your truck today?
 
Thanks mark

1963c-10 04-16-2012 08:44 AM

Re: What did you do to your truck today?
 
2 Attachment(s)
Got some work finally started on the body today. Been off the project the last few months with disassembly on the parts truck and work.

bobbylast 04-16-2012 03:04 PM

Re: What did you do to your truck today?
 
4 Attachment(s)
i did all of this in the last 2 weeks
i got a tailgate and put it on, i painted my inner doors, put a mirror on, shortened my column 4 inches and painted and installed steering wheel. also sanded my grill to bare metal and clear coated the crap out of it. it has been a wonderfully busy month. i get bullet caps in the mail from summit on tuesday and i will be making some whitewalls this week....anybody got some 3 drop spindles for 73 to 87?

1963c-10 04-16-2012 03:07 PM

Re: What did you do to your truck today?
 
Are you shaving your own whitewalls?

A.T. RockDriller 04-16-2012 03:45 PM

Re: What did you do to your truck today?
 
1 Attachment(s)
Quote:

Originally Posted by chevy_man5 (Post 5316138)
Took mine for the first drive in almost 10 years! It was only down the road a bit and back, but it was under her own power!

Still having issues with the clutch, timing, brakes, and electrical, but it's moving along!!

Took the hose to it too, so we don't get dirty every time we just look at it.

She looks good sitting in the sun!

Not going to get very far with that gas tank though! LOL

I like it Jason.
I won't pass up a chance to drive mine....

chevy_man5 04-16-2012 05:25 PM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by A.T. RockDriller (Post 5317498)
I like it Jason.
I won't pass up a chance to drive mine....

I need to find or make a brush guard like that A.T.!! I know they were an option, but do you know how common they are? It looks great on your truck, and I think it would look awesome with the 60/61 hood I have!

Your truck is high up on the list of my favorites on here! :metal:

ChuckW 04-16-2012 07:58 PM

Re: What did you do to your truck today?
 
3 Attachment(s)
Got some paint on the old girl... I am very happy with the color and the quality! If the pic's are sideways, I'm sorry.

mud.man.rj 04-16-2012 08:23 PM

Re: What did you do to your truck today?
 
The white in behind the front grill area is a nice touch. Today I had a body man look at the rocker I lowered on the drivers side that was installed wrong and thought it was good work but the pass side is even worse so cut the inner, outer rocker out and cab corner, it was in too far and up to high also had a twist, so waiting for parts. Also welded up antenna hole.

robber grin 04-16-2012 09:20 PM

Re: What did you do to your truck today?
 
Tried to start the 6 cylinder in my 62 C10... emphasis on "tried".

66ChevyMax 04-17-2012 12:36 AM

Re: What did you do to your truck today?
 
Test fit the cab.

http://i1178.photobucket.com/albums/...16Apr12002.jpg
Posted via Mobile Device


All times are GMT -4. The time now is 12:19 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com