Re: What did you do to your truck today?
Saturday I decided to paint my trim stripes silver metallic and re cleared the bed.
http://i88.photobucket.com/albums/k1...capes1/002.jpg http://i88.photobucket.com/albums/k1...07807956_n.jpg http://i88.photobucket.com/albums/k1...21834487_n.jpg http://i88.photobucket.com/albums/k1...47137645_n.jpg |
Re: What did you do to your truck today?
beautiful paint!!! nice work
|
Re: What did you do to your truck today?
Great job!!! Almost painted mine in Atomic Orange or H-D Sedona Orange and black
|
Re: What did you do to your truck today?
1 Attachment(s)
I cracked my intake manifold:cuss:, had looped the heater hoses together so that I can get the heater box out to work on restoring, but decided to put some plugs in instead. Damn if I didn't crack the intake manifold... Guess I know what I am doing this weekend.
|
Re: What did you do to your truck today?
1 Attachment(s)
Any recommendations for a new intake?
I believe that this is a 283, not 100% sure, but no reason to believe it is not, it also has holley 4bbl, suspect it is a 650 single pump. Want to get her back on the road ASAP. |
Re: What did you do to your truck today?
Well nice part on the intakes is pretty much any dual plane intake is great to use today, just stay away from single plane intakes, they are for higher Rpm range, not very streetable. I generally use an Edelbrock Performer whick in your case is good from idle right up to the higher 5,000 rpm range, some more performance minded use an Performer RPM intake, still dual plane but 1,500 to 5,800 Rpm range.
|
Re: What did you do to your truck today?
Quote:
I read somewhere that Bustin designed this in '60 for your hood....then left it that way for the model run..(sounds like sumthin' GMC would do :lol:) They also designed one for the Chev's...a bit simpler in design...and a little easier to come accross. But I, like you, like the GMC one on a GMC. I have only seen one or two before....and those were pictures. I think it would be a fun winter project to build one....for a feller with the right stuff and some fab skills. I wonder what a guy could expect to sell a good quality copy of one for. If you set out to produce a 1/2 dozen at a time, you could sure do a nice job on them without spending too much on time & materials. There is no doubt that you would be better off to have a good straight template to copy. The problem with that concept is that they would appeal to very few... |
Re: What did you do to your truck today?
Quote:
Now that's a real $hitter.:whine: |
Re: What did you do to your truck today?
Quote:
|
Re: What did you do to your truck today?
When and why did it crack? When you were putting the plugs in or because you were putting the plug in? I was just about to plug my heater hole, was reading that other people have done it no prob. I don't want to crack my intake though! I also read that people drill a couple holes I'm the thermostat when doing this too.
Posted via Mobile Device |
Re: What did you do to your truck today?
You have to chase the threads before you put the plugs in. They become corroded and filled with calcium over the years. If you don't chase them, the pressure will expand the port and crack the manifold.
I did mine and it went off without a hitch. Steven |
Re: What did you do to your truck today?
I was a moron at the time, and over tightened the plug. Silver lining is that I found an edelbrock performer manifold at partsource, the ink on the box was faded, must have had it in stock since they opened the store. They were glad to see it go, got it for $99.00!!
|
Re: What did you do to your truck today?
Very cool!
|
Re: What did you do to your truck today?
Got the 62 running on the original 235 tonight! Just have to find a rad and wiring and it's time to get on down the road.
|
Re: What did you do to your truck today?
nice to hear robber!
How about a few pics of the 62... I am a 62 myself (just had my 50th!!!) I hope to have my intake changed, and have my baby back on the road this weekend. Craigerrrr |
Re: What did you do to your truck today?
What gasket material do I use on the plug for
The intake manifold? Posted via Mobile Device |
Re: What did you do to your truck today?
It is a rough looking truck at the moment due to a half centry of Texas suntanning... but I will get some more pics up soon. Good luck with the intake swap and enjoy the ride!
|
Re: What did you do to your truck today?
1 Attachment(s)
Steve'62, if you are just putting pipe plugs in the ports where the heater hose goes on the water pump and the intake you would just use some teflon tape, or some non anaerobic thread sealant. Again, don't be a moron like me and over tighten them. They are tapered threads, the seal is actually metal to metal, the teflon tape serves as a lubricant so the threads don't gall. Cheers! I used brass countersunk hex plugs.
|
Re: What did you do to your truck today?
Use the pink teflon tape. It's stronger and handles heat better.
I tried using ptfe paste and it was a mess, squeezed out and the plugs didn't go all the way in. Steven |
Re: What did you do to your truck today?
Started repairing the dents and rust on my hood.
http://i311.photobucket.com/albums/k...a/DSC00222.jpg http://i311.photobucket.com/albums/k...a/DSC00221.jpg |
Re: What did you do to your truck today?
How is the HF stud welder working out?
I was thinking of buying one but want a real world opinion. Steven |
Re: What did you do to your truck today?
What I did today was bring her home. Finally!!! Well it was actually Wednesday.
http://i1225.photobucket.com/albums/.../1966/1966.jpg http://i1225.photobucket.com/albums/...966/1966-1.jpg |
Re: What did you do to your truck today?
The stud welder is working great! You have to get used to the slide hammer. If it doesn't get a good bite it slips off the stud. For $99.00 you can't beat it. I priced other guns at Eastwood and other sites and they wanted $200 and up. I say go for it. I wish I would have had it a few months ago.
|
Re: What did you do to your truck today?
Quote:
|
Re: What did you do to your truck today?
Quote:
|
Re: What did you do to your truck today?
I bought some sealent so I will try that. Thanks
Posted via Mobile Device |
Re: What did you do to your truck today?
That looks like an old Warm Morning heater. My grandma had one as well... Ahhh, memories.
:) Steven |
Re: What did you do to your truck today?
Quote:
http://rides.webshots.com/album/570011449JVCLFX The upper cab corners were bad. someone must have been in an accident or had heavy lumber slide around. Hope these pics. help you make up your mind. |
Re: What did you do to your truck today?
2 Attachment(s)
Removed the cracked intake, and working on installing the new edelbrock performer. Doing some clean up in the process. Called it a day so the paint can dry on some bits and pieces. Should have it all back together tomorrow. As the manifold is aluminum, I installed SS pipe plugs in the heater, temp sender, and extra vac ports. Careful not to over tighten of course:ito:
|
Re: What did you do to your truck today?
2 Attachment(s)
couple more pics
|
Re: What did you do to your truck today?
Quote:
ron |
Re: What did you do to your truck today?
I managed to put my windshield and rear window back in. Its starting to look like something other than a shell!
|
Re: What did you do to your truck today?
Drove to the cars how and won my first trophy!
http://i1245.photobucket.com/albums/...1/f01ef62f.jpg Posted via Mobile Device |
Re: What did you do to your truck today?
Cool win, funny on the flying car.
|
Re: What did you do to your truck today?
Thanks it was the first time we took this truck to a show so we're batting 1000 so far
http://i1245.photobucket.com/albums/...1/5849f8e1.jpg http://i1245.photobucket.com/albums/...1/57d436a4.jpg Posted via Mobile Device |
Re: What did you do to your truck today?
1 Attachment(s)
Paint!
|
Re: What did you do to your truck today?
Now that is blue and more blue, looks good.
|
Re: What did you do to your truck today?
Quote:
|
Re: What did you do to your truck today?
Quote:
Posted via Mobile Device |
Re: What did you do to your truck today?
Installed rear tj springs and cut a coil and a half!! Looks 100x better.
Posted via Mobile Device |
All times are GMT -4. The time now is 01:31 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com