![]() |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
your definately gonna have to get some shorty headers, as always i am impressed, i wish i could do the type of fab work that you do!
good job! cant wait to see the next set of update pics |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Nice... I can't wait until I can do some work on my '69. You are a true inspiration and a frustration all at the same time.
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Thanks guys.
I was getting sea sick with no swaybars so I had to make getting them back on a priority. I don't know how anyone can stand it without them :eek: So for the front I cut 1-1/8" off the ends of the bar. Without doing so the bar ends would touch the bags when sitting low. I also made some "brackets" to hang the bar down from a the fame a bit (was mounted directly to the frame before). The ECE brackets would probably work fine here, but these could be here TODAY ;) The reason I have to use brackets now is that the bags allow it to go low enough to cause interference between the bar and steering/pitman arms. Now with these brackets installed the cotter pins on the castle nuts almost touch the bar when fully aired out and steering at one lock or the other (sorry no pics of that). I can live with that because #1 I won't be driving aired-out and #2 I won't be turning the wheels to full lock when aired-out and #3 it doesn't touch :hm:. Here's the pics of that: http://i6.photobucket.com/albums/y23...g?t=1185396672 http://i6.photobucket.com/albums/y23...g?t=1185396672 http://i6.photobucket.com/albums/y23...g?t=1185396672 I also found that the rear was hanging up on the right side. The ECE Super-track Bar bracket was hitting part of the notch. So I moved the bracket from above the lowering block to under the lowering block, trimmed the bracket, and trimmed the notch where the inner plate was hanging over (notch not yet trimmed in this pic): http://i6.photobucket.com/albums/y23...g?t=1185396672 That got me down lower in the rear. In fact it's at the point now where the gas tank will touch the ground before the suspension bottoms out (time for some bigger wheels): http://i6.photobucket.com/albums/y23...g?t=1185396672 http://i6.photobucket.com/albums/y23...g?t=1185396672 |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Here's the true aired-out rear suspension with the help of jack stands:
http://i6.photobucket.com/albums/y23...g?t=1185396672 http://i6.photobucket.com/albums/y23...g?t=1185396672 http://i6.photobucket.com/albums/y23...g?t=1185396672 http://i6.photobucket.com/albums/y23...g?t=1185396672 Good use of the driveshaft clearance. It does not touch anything when fully aired-out :) http://i6.photobucket.com/albums/y23...g?t=1185396672 |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
The reason I left the notch at a full 8" even though I don't want to "lay-out" was so I could run the Camaro rear sway bar I have been using. This set-up is especially nice for lowered trucks when you don't want something hanging down below the trailing arms as some of the aftermarket rear bars do.
I ended up grinding down that outer/rear edge of the inner notch plates to gain clearance for the swaybar. Also, I'm not totally satisfied with the mounting tabs that are welded to the notch. I think I'm going to run some 2x2 through both notches to serve as a bridge and swaybar endlink brackets. Here's what it looks like now (2nd pic): http://i6.photobucket.com/albums/y23...g?t=1185397351 http://i6.photobucket.com/albums/y23...g?t=1185397351 It's good to have it handling "properly" again. Now I need to do some cleaning up of the lines etc back there. Once I figure out the final config I'll POR-15 all the bare metal. |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Quote:
Quote:
Boy was I scared when I read this, but I had over 1 fingers thickness between mine and the bags. Wonder why yours was into the bags? I guess we could have a different type of bag up front. Looking good ;) |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Quote:
Mine may have been located further aft than stock when I drilled the bushing/bracket holes in the frame. I have SS-RE7's. |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
OIC, No idea what bags I have, but I have the ECE lowered brackets in
the stock locations, so that could be part of the differance on mine. ;) |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
1 Attachment(s)
WOW, never saw this thread before... this is seriously the coolest thing I've ever seen done to a 67-72 truck.
Here's the "Argentina" version! I think yours is shorter, but same idea. Notice it also has "truck doors." This is a real pic, not a photoshop posted by GMCbsas http://67-72chevytrucks.com/vboard/s...ight=argentina It's on page two. There's also an "avalanche" looking truck too! |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
5 Attachment(s)
Quote:
R |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Quote:
I didn't realize this until recently, but GM DOES design and test a lot of their overseas cars HERE, even though they are not for sale in the US. Check out the Chevy Lumina SS, for sale only in the middle east. The pics were taken by GMInsider in Michigan. http://www.gminsidenews.com/forums/g..._SS_front1.jpg |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Quote:
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Man Frizzle, I may have to purchase a 'Burban and send it with a check in the glovebox for you to do up for me, you are very innovative and with everyone seeming to do the same thing, you've managed to break out of the norm, congrats.... PS, if that Lumina SS was sold in the US. I'd buy one TONIGHT!
Brandon |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
subscribing
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Man, This thing is gonna look great with the new wheels on it. Hurry up and get some tires!
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Quote:
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Quote:
The wheels are from a late 90's/early 00's Mustang. They are 17" dia by I think 8.5" wide. The rear tires are 275/40/17. |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Quote:
Quote:
Quote:
Gringo, I just got back in town and had a notice from FedEx on my door! :D :metal: :D |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Quote:
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Quote:
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Quote:
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Well, since the wheels weren't delivered today I had to let the creative juices flow, so I messed with the 60-66 Burb hinges I just got from Captainfab. Here's a little preview (that cut-out section will be re-installed):
http://s6.photobucket.com/albums/y23...h_eedf8fcf.jpg |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
:lol:
Cool video! |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Wheels :D
http://i6.photobucket.com/albums/y23...g?t=1185916371 http://i6.photobucket.com/albums/y23...g?t=1185916371 http://i6.photobucket.com/albums/y23...g?t=1185916371 http://i6.photobucket.com/albums/y23...g?t=1185916371 and just to show it with the rear aired out: http://i6.photobucket.com/albums/y23...g?t=1185916371 http://i6.photobucket.com/albums/y23...g?t=1185916371 |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
That is SWEET!
|
All times are GMT -4. The time now is 08:48 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com