Re: Restomod 72 K10 "Good Memories"
Quote:
|
Re: Restomod 72 K10 "Good Memories"
4 Attachment(s)
Picked up the seat today. I am almost never fully satisfied with results of work I farm out, regardless of the cost. Very happy with the results. Feels nice but I sit a bit higher than wanted now, I fully expected this with the foam work. Will shorten the seat mount brackets about 1"-1.5" My modified inner bracket for the 60 side needs an additional 1" chop. I sat them in the truck to see how they look. What do you think?
|
Re: Restomod 72 K10 "Good Memories"
Man Richard, those seats are incredible! I’m pretty jealous!
|
Re: Restomod 72 K10 "Good Memories"
Seats turned out good. I definitely understand the not being satisfied with farmed out work.
|
Re: Restomod 72 K10 "Good Memories"
Look like they belong!
|
Re: Restomod 72 K10 "Good Memories"
Quote:
Quote:
Quote:
As I need to modify all four seat brackets now. I am reconsidering a custom frame that bolts to stock mounting points. Going to look at seat risers again and make a decision on which way to go. |
Re: Restomod 72 K10 "Good Memories"
You outdid yourself on these
|
Re: Restomod 72 K10 "Good Memories"
Quote:
|
Re: Restomod 72 K10 "Good Memories"
Quote:
|
Re: Restomod 72 K10 "Good Memories"
1 Attachment(s)
Built a frame for the seats a couple weeks ago. Pushed through the heat and fabricated the mounts today. Want to add some gussets to the feet for more strength. Maybe get to that and cutting seat risers down this weekend.
|
Re: Restomod 72 K10 "Good Memories"
1 Attachment(s)
Have been working on the seats when I can. The three most difficult risers are modified. Inner on the 60 side need chopped still. I took over 4" out of the risers to get the drop I wanted. Had to order hardware online to complete the install. No one here in California seems to have more than a couple of bolts in stock. Pretty sure I know who to thank for this ridiculousness.
|
Re: Restomod 72 K10 "Good Memories"
Wow! over 100,000 views now. Thanks to all for the interest in my project. It has been really hot here, 114 degrees +. Would love to see some more comments. To hot for me to get any work done. My work place is at least 10 degrees lower and is somewhat tolerable. Supposed to be cooling down by end of week and may get on finishing the seats.
|
Re: Restomod 72 K10 "Good Memories"
Quote:
|
Re: Restomod 72 K10 "Good Memories"
Quote:
|
Re: Restomod 72 K10 "Good Memories"
Quote:
My rear seat brackets are way overkill at 3/8 inch thick. Those are integrated belt seats from the third row of a cadi/suburban. I will likely go with 1/4 inch for the front brackets. |
Re: Restomod 72 K10 "Good Memories"
1 Attachment(s)
Quote:
|
All times are GMT -4. The time now is 11:55 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com