70 gmc longbed weighs 4300 with me in it
357 aluminum heads 1.9 60ft 8.7 1/8th 80mph Posted via Mobile Device |
Re: post latest 1/4 and 1/8 mile times and 60ft.
1968 c10
turbo 355 sbc borg warner s475 turbo th350 trans 4130 lbs 3.73 rear gears ptc 3500 stall 1.5 60 foot 6.46 @110 in the 1/8th 10.09 @131 mph in the 1/4 stock trailing arm suspension, with drop coils, front and rear sway bars added 15 year old napa shocks. |
Re: post latest 1/4 and 1/8 mile times and 60ft.
https://scontent-iad3-1.xx.fbcdn.net...a7&oe=56A609F0
5.3 10psi 4L80E 02-04 LS6 cam 3.25 gears Moser 9" 4100lbs Now that Drag Week is over, time to turn up the boost and improve those times a little. Hoping for 10's at some point soon. I love this turbo stuff, drive like stock and scream on the skinny pedal. |
Re: post latest 1/4 and 1/8 mile times and 60ft.
1 Attachment(s)
Had my 82 out at the track on opening night at Castrol Raceway in Edmonton, Alberta on April 29th. Ran a new best! The DA was 2780' and I ran a 11.61 @ 116.10.
Heading back on May 20th to try to better my time. |
Re: post latest 1/4 and 1/8 mile times and 60ft.
|
Re: post latest 1/4 and 1/8 mile times and 60ft.
1 Attachment(s)
Quote:
not my best pass, but slowly getting there. new shocks helped with launches. need to turn up the boost at launch to get the 60' back to what it used to be |
Re: post latest 1/4 and 1/8 mile times and 60ft.
'52 GMC P/u
7.3L idi n/a diesel custom intercooled turbo 4 sp auto dually dana 70 locker 3:54 gears First time drag racing for me and the truck low boost 8psi slipping trans 60ft 2.33 1/8 11.12 @ 60.23 1/4 17.64 @ 75 Slow but lots of room for improvement A ton of fun |
Re: post latest 1/4 and 1/8 mile times and 60ft.
78 SWB fleetside, Eagle 383, RHS Proaction 200 heads, th350, 9" w spool and 4.88 gears, caltracs CE 3 ways in front.
Best time to date: 1.628 60' 7.478@90.57 11.885@109.53 |
Re: post latest 1/4 and 1/8 mile times and 60ft.
15.32@86 with 2.4 60'
|
Re: post latest 1/4 and 1/8 mile times and 60ft.
Finally took my 71 swb. My first time going down the drag strip was lots of fun but the reaction time and 60 ft times show I'm a rookie. Truck has a stock ls1/4l60e with stock converter and 3.73s.
60' 2.104 1/8 8.68 1/4 13.57 Mph 99.37 |
Re: post latest 1/4 and 1/8 mile times and 60ft.
I took the '72 out for it's first passes with the 496 I built 2 years ago. Truck pulls great but needs a converter swap, it's way too tight. I also took it across the scales and it weighed 4480 lbs with me in it.
1.78 60' 7.80 1/8th 12.15 1/4 @ 109 mph. |
Re: post latest 1/4 and 1/8 mile times and 60ft.
Quote:
ADD SOME NITROUS IT WILL Loosen that Ole converter up! |
Re: post latest 1/4 and 1/8 mile times and 60ft.
1 Attachment(s)
1st time having the truck at the track, it weights 4000lbs with me it it. A little 357sbc with a 142 supercharger.
Best 60ft 1.923 Best 1/8 8.176 @ 86.06 Best 1/4 12.789 @ 105.61 |
Re: post latest 1/4 and 1/8 mile times and 60ft.
60' 2.168
1/8 et 10.601 1/8 mph 63.17 1/4 et 16.801 1/4 mph 78.01 Dropped .7 et and gained 3 mph from last year |
Re: post latest 1/4 and 1/8 mile times and 60ft.
just started building my 86 chevy sb. have been racing a 65 elcamino for a couple years now.
.040 sb 400 comp 660 solid roller callies crank 6 in rods mahle forged flat tops brodix cnc track1 heads brodix hv1000 intake 1050 dominator on 110 9 inch spool with 488's 29.5 9 inch mickey slick built 350 turbo manual valve body 5500 convertor car was going 10.20 but didn't handle very good gonna transfer this set up into my truck over this winter on caltracs |
Re: post latest 1/4 and 1/8 mile times and 60ft.
Quote:
|
Re: post latest 1/4 and 1/8 mile times and 60ft.
Quote:
went efi last winter. 2nd pass on efi, 15lbs of boost. did a little wheelie and ran a 6.43 @109 in the 1/8th. 1.4 60' |
Re: post latest 1/4 and 1/8 mile times and 60ft.
2 Attachment(s)
1974 C-10 Long Bed , Dual Tanks , Trailer Hitch ect.
350ci Edelbrock RPM Heads, Comp XR270, Edelbrock Air Gap, Edelbrock 600cfm. Th350 2400 Stall 4.10 posi MT ET Street SS 275/60/15 1/8 mi ET 9.06 78 Mph 60’ 2.13 Was having carb issues had to baby it off the line. Should be in the high 8’s once i get my carb working right. |
Re: post latest 1/4 and 1/8 mile times and 60ft.
1.41 60ft
6.19@110 1/8th 9.87@140 1/4 760whp, 315 drag radial, 16lbs of boost. shooting for an 8 second this year! |
Re: post latest 1/4 and 1/8 mile times and 60ft.
MMM boost
|
Re: post latest 1/4 and 1/8 mile times and 60ft.
60'...1.382
1/8...6.526 MPH..102.52 1/4...10.44 MPH...122.8 only 3rd time out with new engine. Truck needs some more suspension work. launching on T-brake @ 3500 rpm tires @ 12psi |
Re: post latest 1/4 and 1/8 mile times and 60ft.
Quote:
Looking good!! Remind me, you have a TH400? What tire gear? Whats the verter flash too? |
Re: post latest 1/4 and 1/8 mile times and 60ft.
TH400
5500 flash on the verter tire 29.5 11.5w 4:56 I still have the 1'' drop springs in the front from many years back. I'm going to install Santhuff front springs before I go out again. I still have the Moroso front springs I got from you many years ago on the shelf |
Re: post latest 1/4 and 1/8 mile times and 60ft.
Dan Madewell
12/4/18 60' 1.56 1/8 ET 7.56 1/8 MPH 90 Year 1986 3860lbs 327 cubes th350 coan 4500 150 shot 4:11 28x10.5 I drive it to highschool! |
Re: post latest 1/4 and 1/8 mile times and 60ft.
|
All times are GMT -4. The time now is 09:59 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com