Re: Ian's Tennessee Honey '64 Short Box Step-side - England
Quote:
Quote:
Quote:
Quote:
Quote:
Quote:
|
Re: Ian's Tennessee Honey '64 Short Box Step-side - England
3 Attachment(s)
Very quick update,
After finishing the inside of the passenger door I got it hung and painted this weekend Attachment 1647936 Attachment 1647937 Got the fender finished too Attachment 1647938 The bad news is that I have to start the drivers side rust repairs now :waah: |
Re: Ian's Tennessee Honey '64 Short Box Step-side - England
Your progress continues to make me smile.
Sitting here on a train to London its a good thing to read first thing in the morning. Well done, again. |
Re: Ian's Tennessee Honey '64 Short Box Step-side - England
Nice progress Ian Paint is looking good.
|
Re: Ian's Tennessee Honey '64 Short Box Step-side - England
1 Attachment(s)
Man that color is familiar.
|
Re: Ian's Tennessee Honey '64 Short Box Step-side - England
Quote:
Quote:
Quote:
|
Re: Ian's Tennessee Honey '64 Short Box Step-side - England
3 Attachment(s)
Apologies for the non-truck related post, but I thought I would share a bit of a cautionary tale.
My Mum always says “never say never, you’ll live to regret it” and I must say I try hard to live by this but now and again I suffer a lapse or two. Previous lapses have included, "I’ll never go to see Dianna Ross", "I’ll never shave my head". "I’ll never wear a pink tie" (the list goes on):lol: Now, in the UK before you can ride a motorcycle on the road you must pass your Compulsory Basic Training test(CBT), this allows you to ride on the road but you are limited to the size and power of the motorcycle until you pass a full test. A couple of weeks ago my wife passed her CBT and has bought a motorcycle, “Hun” she said “you’ll have to get another bike too so you can ride with me”. She didn’t have to ask twice.:bann: And so, to my most recent lapse, anyone who knows me will know I love motorcycles and especially the air cooled “big twin” variety. A year or two back I was out for dinner with friends and (and I do recall saying this) I said “I will never buy a liquid cooled Harley, Harley’s should be air cooled”. Well what do you know, look what showed up at my house today. In my defence, I got a really good deal on it. :metal: Attachment 1651151 Attachment 1651152 Attachment 1651153 I don’t think I’ll regret this one. |
Re: Ian's Tennessee Honey '64 Short Box Step-side - England
Well done , you'll enjoy riding it this summer. But it'll make progress on the truck slow down and I am speaking from experience
|
Re: Ian's Tennessee Honey '64 Short Box Step-side - England
Nice bike. Looks like fun
|
Re: Ian's Tennessee Honey '64 Short Box Step-side - England
Just Lovely Ian.
Congrats. |
Re: Ian's Tennessee Honey '64 Short Box Step-side - England
5 Attachment(s)
Quote:
Quote:
Quote:
You know those 10 minute jobs, the ones that turn out to be not quite the 10 minute job you thought, well I've just finished one.:lol: A while back I bought a pair of Jeep Cherokee check links to replace the ones that came with the truck (yes honestly this was the passenger side check link) Attachment 1652530 I got them on eBay with nuts and roll pins for about $15 including shipping, a bargain I thought,:metal: Attachment 1652532 Having my newly painted door with nothing stopping it opening to the point of destruction was not ideal, I had 10 minutes spare so I thought "I know I'll fit the check link". :dohh: I soon hit a bit of a problem was the original screws were seized solid, I could have taken them out before the door was painted or actually hung and adjusted (Like any sensible person might have done) but oh no. :dum: Attachment 1652531 I tried releasing oil, a long bar and even cutting a slot in one to see if a straight bit would grip better than a pozi all to no avail. There was no room to drill and I didn't want to take the door off so I broke out the die grinder and a ball end carbide burr ( a risky strategy with a freshly painted door) and ground the middles of the screws out. Attachment 1652533 Any way about an hour and a half later my 10 minute job was complete, It really is unbelievable how well these work, you would swear they were OE Attachment 1652534 |
Re: Ian's Tennessee Honey '64 Short Box Step-side - England
What a lovely piece in the passenger door.....:mm:
The Cherokee units seem to be the perfect replacement. And thy can be adjusted to suit. |
Re: Ian's Tennessee Honey '64 Short Box Step-side - England
4 Attachment(s)
Quote:
I have decided to clear off the un-finished jobs list before doing the driver’s side cab repairs. These jobs include rebuilding the rear brakes then finishing up the brake lines and bleeding the system, they also include getting a choke cable on the carb, running the engine up properly, doing the timing etc. and filling the trans after its rebuild. Another job to do is the panhard bar. You may remember from a while back in this thread I discovered that my truck has a ’65 rear axle, I realised this only after I had ordered a 64 panhard bar from POL. Because of length and bracket position I couldn’t use either a 64 or 65 bar. Attachment 1654201 So when life gives you lemons and all that….. If I have to shorten the bar I have a number of options, I could simply cut and weld, I could make it adjustable at both ends or by using a LH thread rod end and weld insert I could make it adjustable without removing it (it will work like a turnbuckle). This seemed the best option. I ordered a forged LH thread rod end from Speedway, and a LH thread weld bung from a local rally car supplier which even has flats milled onto it for easy adjustment. Attachment 1654202 These pictures show how much it had be shortened, one advantage of making it fully adjustable is that your measurements can be +/- about a ¼” and you’ll be fine. Attachment 1654203 Attachment 1654204 |
Re: Ian's Tennessee Honey '64 Short Box Step-side - England
5 Attachment(s)
This is a suspension piece so a good prep is important to get effective weld penetration,
Attachment 1654208 A good trick when tacking things like this is to lay the job in a piece of angle bar while tacking up it helps keep things aligned and means you don't have to earth the job.. Attachment 1654209 I got in real tight and used plenty of heat to get good penetration, I’ve no way of rotating the bar while welding so I ended up doing 4 separate runs doing opposite sides to reduce distortion, I got a good strong weld but boy was it ugly. I dressed it back carefully on a grinding wheel and then dipped it in some gold paint just to stop the bare metal rusting (yes, I know the match is awful :lol: but I’ll find something that matches better another time) Attachment 1654210 I ended the day by trying it “for a fit”. I will need to ensure I can set it level once the truck is built up so I‘ll probably drill another couple of pairs of holes in it so I can adjust the height if needed, I’m not sure whether to weld or bolt the chassis bracket in place (any suggestions?), but that’s a job for another day Attachment 1654211 Attachment 1654212 |
Re: Ian's Tennessee Honey '64 Short Box Step-side - England
Having only read the first part of this on my phone while I was in the garage I was going to say hold from doing anything until I check out the spare Panhard Bar I have here, but looks like I'm too late.
If for any reason this doesn't work let me know and I'll look it out. |
Re: Ian's Tennessee Honey '64 Short Box Step-side - England
5 Attachment(s)
Well I've had a busy couple of weeks, I have changed jobs and now have a 2 hour commute to work (each way:waah:) so I am having to get used to that. I've also had a load of other stuff, including giving a friend mum her first ever pillion ride on a motorcycle, as part of her 80th birthday celebrations!!
Anyway I decided to bolt the panhard bracket to the frame rather than weld it, so made a simple plate to attach the upright brackets to, Attachment 1663417 I also drilled a couple of extra holes in the mounting bracket to give me some adjustment and allow me to compensate for any drop in ride height once the bed is back on. At the point the bracket attaches the frame runs up a little creating a gap this means the 2 “legs” on the bracket have to be different lengths in order to remain vertical. Attachment 1663418 It's always tricky measuring gaps like this, I use one of these, Attachment 1663419 This one is metric but you can buy them in inches too. I bought a few of these when I was last in Japan, this is the last one, removed from its wrapper specially for the occasion. Although intended as a bore gauge they are great for gaps too. Each increment on this one is 1/10 of a millimetre which is 4 thou so they are incredibly accurate. Before tacking you have to make sure the legs are vertical, square to each other and parallel. This really is one of those occasions where having 6 arms would be great :lol: Attachment 1663421 Attachment 1663420 |
Re: Ian's Tennessee Honey '64 Short Box Step-side - England
Wish Id gone that rout and made a bracket for the chassis rather than modifying the one on the trailing arm!
|
Re: Ian's Tennessee Honey '64 Short Box Step-side - England
5 Attachment(s)
A quick update on the panahrd rod. After getting everything tacked up the chassis bracket was welded and painted.
Attachment 1664728 Attachment 1664729 As mentioned in the last post I had decided to bolt the bracket to the frame, I found these great high tensile bolts and grade 8 nuts at my local suppliers, they have a nice low profile so don't hang down too far under the frame and have integral washers, Attachment 1664730 The bracket looks good bolted up (if I do say so myself :lol:) Attachment 1664731 Attachment 1664732 |
Re: Ian's Tennessee Honey '64 Short Box Step-side - England
4 Attachment(s)
And everything lined up great
Attachment 1664741 Before Attachment 1664742 And after Attachment 1664743 I picked these flow masters up a week or two back, they've been used (but not much) at £60 ($76 ) for the pair I couldn't say no, so I guess I'll be thinking about the exhaust next :lol: Attachment 1664744 |
Re: Ian's Tennessee Honey '64 Short Box Step-side - England
Great job on the bracketing Ian.
And those Flowmasters.... :metal: I paid a lot more for mine. You did well. |
Re: Ian's Tennessee Honey '64 Short Box Step-side - England
Looking good Ian . I have yet to do my exhaust so I will be watching what route you go . Great work as usual.
|
Re: Ian's Tennessee Honey '64 Short Box Step-side - England
Quote:
|
Re: Ian's Tennessee Honey '64 Short Box Step-side - England
Quote:
I love these forums because we all learn from each other. Trust me, mine is built in my head, but I will be watching you too Ian. |
Re: Ian's Tennessee Honey '64 Short Box Step-side - England
Just read the whole thread, informative, witty and a good read, Perfect thread and very very impressive work
|
Re: Ian's Tennessee Honey '64 Short Box Step-side - England
5 Attachment(s)
Gentlemen, thank you for your kind comments:thumbs:
A bit of an update (across 2 posts) .....Part A I’ve been doing a lot of odd jobs recently, I finally got around to fitting the choke cable, Attachment 1685431 Put the belts on the engine, put fluid in the PS pump etc. etc. Attachment 1685432 So before I do my final round of rust repairs (I’m saving that for the dark nights :lol: ) I’ve decide to do the fuel tank and exhaust. I need to know where the exhaust will exit the truck and I need to know how high above the frame the tank can sit so before starting on these jobs I’ve fitted the rear cross sill and new rear bumper which is a ’67. For anyone thinking of fitting a ’67 bumper to their 64-66 truck I’m here to tell you it’s an absolute doddle. :clap::clap: I bought brand new rear brackets from Brothers along with the new rear bumper and it all bolted straight up, (no grinding out holes or anything like that), they even come with new nuts and bolts. Attachment 1685433 Attachment 1685434 Next task was to assemble a decent selection of exhaust bends and connectors Attachment 1685435 |
All times are GMT -4. The time now is 02:59 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com