![]() |
Re: '64 chevy 2wd to 4wd
4 Attachment(s)
|
Re: '64 chevy 2wd to 4wd
3 Attachment(s)
|
Re: '64 chevy 2wd to 4wd
Nice score on the box and stuff. The truck looks great, nice job!
|
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
thanks Dale!
scored more....$15 box blazer looks to be mpc snap-tite rescue blazer. un-built no-box goodwrench nascar truck (already have, but lots of parts), another 2wd dually, & a topless s-10. not into the s-10, but it does have nice rims Attachment 1403406 Attachment 1403407Attachment 1403408Attachment 1403409Attachment 1403410 |
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
there was also a set of BF baja T/A's in the box
Attachment 1403419 and this, yeah, a car, but it was thrown in on a trade (who dont like black T/A's?) Attachment 1403420 then i stepped completely out of my building boundry's & bought this for $20. why? dont know, just looks COOL! he also has the matching pumper truck & boom truck................................. Attachment 1403421 box is beat to heck, but everything is there, all "over 300 parts" of it. not sure, but guessing the first issue of this model (early '70's...?) the prices on the back of the instruction sheet sure look like '70's era.... Attachment 1403422Attachment 1403424 |
Re: '64 chevy 2wd to 4wd
1 Attachment(s)
and look at what the post man just dropped off 5 mins ago :metal:
i wish all days were as good as today....:lol: raft of swamps for the rollback Attachment 1403435 |
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
now that i'm done playing with my new junk, see how them swampers are going to look
maybe shorten the wheelbase a small bit Attachment 1403590Attachment 1403592 that blazer is to nice to rob the hood from, so fix what i got.... dont know where the other piece is Attachment 1403593 it's to narrow too.... Attachment 1403594 still needs work, but i'll do that at final bodywork- tired of sanding right now.... Attachment 1403601 |
Re: '64 chevy 2wd to 4wd
4 Attachment(s)
been getting some of the basic's done. lots of trial & error & FITTING!
nothing glamorous been spending too much lately (according to wife...) so i did'nt order my $30 one ton rims. using the rims from the sneaky pete. besides not being close to fitting, they will need lock-outs & axle/axle flanges. what a boring thing to do....sand, sand, sand Attachment 1404073 made a few changes to the frame, started adding rivets Attachment 1404074 and finally got some kind of tub happening. was going to build one, but it would use up my 030 stash, & i'll need it for later. seeing how 'bout 91% of it is out of my junk box.....hate them ugly molded seats- at least they match:lol: this is what i got so far after figuring it all out, i will make door panels, window cranks, seatbelts,...... Attachment 1404075Attachment 1404076 |
Re: '64 chevy 2wd to 4wd
2 Attachment(s)
well, the tub fits nice, i have a floor. now i can get going. just have to mock up a drivetrain & mounts. thinking i should have bought 44's or 49's, them 38's look small......
Attachment 1404079Attachment 1404080 |
Re: '64 chevy 2wd to 4wd
Man, you been busy while I was up north at my cabin. It all looks great and I agree about shortening the wheel base. I like the 38's. The front end would sit a little higher with a load on it. So with a truck up there it will look correct. I'm also liking the detail (rivets). Nice attention to details. Keep it up!
|
Re: '64 chevy 2wd to 4wd
4 Attachment(s)
hey, it's always great to get out!
got a question, prob simple & stupid to you, but i have'nt drove a rollback, nor can i find a pic on the computer- are the deck controls mounted to the deck? or stationary & mounted to the frame? Attachment 1404706 gathering parts from my stash, only matched part of the 454 is the block/tranny. everything else is mis-match..,..:metal: getting good at scratchin' air cleaners... Attachment 1404707 some cab work the firewall is from the sneaky pete kit, has a mini kenworth nose, so after a bunch of grinding- got it into a squarebody. lost the floor ribbing sanding the bejeezus out of it, so laid some strip styrene over what was left. will putty it up & smooth it & hopefully look like actual cab ribbing Attachment 1404708Attachment 1404709 |
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
have a warn electric winch i was going to use on the deck, but it looked TINY & WIMPY on there....went looking for a pic & see some of the older trucks are running worm gear winches. i think a worm gear with cogged wheels looks more interesting then a wimpy electric, so i ripped apart a old car cassette player, hoping to get one or 2 decent size wheels. boy, was i surprised when this many came out of it....
Attachment 1404712 but i'm really liking these things too, whatever they are....:lol: couple yr supply of oil filters. couple of the bigger ones on the hydraulic tank..... Attachment 1404713 this is what i got so far.... Attachment 1404711 and check these babies out! guy on the model board is casting these, i ordered 4 racks of them- $3 a rack. wish i had these yrs ago.... and another dude from canada (less shipping/ no exchange :metal: ) is casting me up a couple of sets of some beauty 1 ton rims, & only a buck & a half a rim Attachment 1404714Attachment 1404715 |
Re: '64 chevy 2wd to 4wd
The bed controls are frame mounted (stationary). Standard equipment is on the drivers side. Optional dual controls are on both sides. Air cleaner looks great. Everything is coming out nice. Creative thinking on the wideband using the transistors as oil filters.
|
Re: '64 chevy 2wd to 4wd
3 Attachment(s)
yeah i put one of them on the engine block & it does look just like a oil filter...
not a lot of progress, was working out of town for a couple days....here... Attachment 1406327 how awesome is that! started making some door panels Attachment 1406329Attachment 1406331 |
Re: '64 chevy 2wd to 4wd
4 Attachment(s)
that $15 box of junkers is coming in handy.....
snagged a fuel tank from one. made up some sideboxes. "latches" are ford explorer door handles... Attachment 1406332 some bed controls Attachment 1406333 put a hydraulic cylinder on the wheel lift. am in the process of making a hydraulic tank to mount behind the pass sidebox. will be fairly easy to mount a control valve & lines & plumb the rams with them right across from each other... Attachment 1406335Attachment 1406336 |
Re: '64 chevy 2wd to 4wd
How did you get any work done. I would've been fishing. LOL...Everything else is coming out great. I just got home from a long weekend at the cabin.
|
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
my fishing license expired!...:dohh:
soon as i found out it was a metal roof & we were taking the flatdeck trailer, tried to slide my quad on the back of it, but the boss was'nt going for it.....:waah: so i finally got all the hard points, locations etc. changed the firewall, needed inner fenders, so into my new $15 box & strait to the s-10 (knew it would come in handy....) a little chop work... Attachment 1408744Attachment 1408741 into the stripper.. Attachment 1408742 started a visor, & a hydraulic tank. the pencil line is how much i cut-off to get the rear wheels where they needed to be Attachment 1408745Attachment 1408746 |
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
here's what it looks like jammed in the crew. also made a rad support. the holes in the ends are to clear the headlights. will put dual batts in to cover them up
Attachment 1408757Attachment 1408758 the finished visor Attachment 1408759 rudimentary control valve. will plumb it with hard lines on the frame (easiest) with hoses at the rams. also got my engine/tranny mounts located & in Attachment 1408760 rear axle & springs are built & almost ready to go in. notice the hyd tank is narrower... Attachment 1408765 |
Re: '64 chevy 2wd to 4wd
It's all looking great. The details are looking good. Totally awesome.
|
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
thanks Dale, been a slow go, lot of unseen boring work scratchin' it.....
did manage to get the springs in so it can stand by itself now Attachment 1410624Attachment 1410625Attachment 1410626 see what it's looking like so far..... Attachment 1410627Attachment 1410631 |
Re: '64 chevy 2wd to 4wd
I don't know what anyone else is thinking, but it is looking bad a#$ to me. Great job, keep it up. The boring scratch work to you is amazing to me.:metal::metal:
|
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
here's some more boring scratch work.....
tie rod & front u-bolts Attachment 1411479 looking pretty plain on the pass. side- needs a air tank. figures, i have no tubing that big, but i do got a felt pen.... Attachment 1411480 Attachment 1411481 bent up some hyd. lines. the long one to the deck ram will half to be finished when it goes in. wont get it thru the hole in the frame otherwise... Attachment 1411482Attachment 1411483 |
Re: '64 chevy 2wd to 4wd
4 Attachment(s)
found these nice little lites for the taillights, & where they'll go
Attachment 1411507Attachment 1411508 workin' on a bumper.... Attachment 1411509Attachment 1411510 |
Re: '64 chevy 2wd to 4wd
Looking great. Nice idea on the air tank. Front bumper looks good too
|
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
with the nice weather, been slowing down on this.....
my homemade int is almost there, seatbelts & a couple other things yet Attachment 1414422Attachment 1414423Attachment 1414424 deck is almost done (yeah, my winch cable is spooled the wrong way.....) Attachment 1414426Attachment 1414427 |
All times are GMT -4. The time now is 04:09 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com