Re: Project truck dream 65"
 

So,the Air condenser is finally mounted.I opted for this style unit as it has top and bottom mounting which eliminated stress on the condenser tanks.

I left adequate room to run my trans cooler in behind it,as I did not want to run it up front.I used a thread setter and installed the thread plugs in the original cross bar holes....,also separated and used the original cross bars as well.

The spacing is within 1/8 of an inch on top and bottom so up close all is concentric. I will be using 90 degree coupled elbows as the outlet side is limited for space now.

All is nice and square ! My good buddy Chopper approves.:clap:

A special thanks to Darcy L. for his expert abilities and keen eye.;)

Re: Project truck dream 65"
 

Next step...tonight and tom,I will be building a mounting bracket for my coolant
and washer tanks.

The mounting tab has been welded to the aluminum channel,so the next step is to make it look pretty....stay tuned for progress !:ito:

Re: Project truck dream 65"
 

Your Rad Mount looks very smooth ! I like how you mounted your radiator in there.

Re: Project truck dream 65"
 

i really like your build. the grill looks awsome.

Re: Project truck dream 65"
 

Really nice work, can't wait to see more

Re: Project truck dream 65"
 

Thanks fellas,its good to finally get it done !

Re: Project truck dream 65"
 

Spent the day finishing the washer/coolant bracket ! It took me most of the day and was alot of work. I'm happy with my efforts,it was worth the time.

It would have been easy to laser cut all of this....oh well I only needed to use the zip cut,hacksaw,sandpaper,files,center punch,WD40,drill,trouble light,measuring tape,ruler,scribe,permanent marker,drafting pencil,screwdriver,6 point socket set,earplugs,vice,clamps,........................etc.,imagination and time."I think Im gonna make a song outta this" !

Got my feet up and relaxing now in the Lazyboy,so Ill post some pics in the next few days of it mounted with the tanks installed.

Re: Project truck dream 65"
 

brotha you got some skills nice work

Re: Project truck dream 65"
 

Thanks for the good words !

Cheers,
Ed.:ito:

Re: Project truck dream 65"
 

Here they are mounted as promised !I'm not completely finished yet...I was thinking of tapping the mounting holes for the tanks and also final sand and high speed polish the mount.

I was able to use the original fan shroud holes for this setup,kinda happy about that.;)

Re: Project truck dream 65"
 

Nice and clean. Like it!

Re: Project truck dream 65"
 

:agree:

Re: Project truck dream 65"
 

looks very professional

Re: Project truck dream 65"
 

Sanded down the front bumper,its full of deep scratches,dents,etc.Guess Im now looking for a good front .Want to chrome it but just to much work to get it there.Shame but you gotta draw the line at one point.

Can anyone help me with a strait clean one...originally painted ?

Re: Project truck dream 65"
 

sorry that I didn't get back to you about the bumper but I only have the one good painted one after some sob stole my chrome one. there is a fellow done here who has one and I will pm you his email and maybe you can pry it from him. he did have one chromed and doesn't need it
ron

Re: Project truck dream 65"
 

A chrome bumper can be gotten by anyone for $100 by several vendors

Re: Project truck dream 65"
 

Thanks for the input fellas,Im only looking for an original painted...no chrome.Ill look into the one mentioned if it works out.....great !
Cheers,
Ed:ito:

Re: Project truck dream 65"
 

Thanks Ron,once my email is working again,Ill send one to him.

Cheers,
Ed.

Re: Project truck dream 65"
 

Nice work Ed, really nice work

Re: Project truck dream 65"
 

Thank you,appreciate the good words.
Cheers,
Ed.:ito:

Re: Project truck dream 65"
 

nice work on the grille

Re: Project truck dream 65"
 

So,I was driving down a country road today and caught a 64 step out the corner my eye !So naturally I had to stop in to meet the owner.

Turns out to be a pretty good fella,.... and........,he's got a spare bumper for me!..........and it looks mint !

Made a new friend in the process.There's something good in all of us old Chevy folks,always put's a smile on my face.;)

P.S. If any or you can help,Im looking for a C-20 emblem for a 1964 for my new friend...,Id appreciate it.Here's a pic to compare.

Re: Project truck dream 65"
 

Actually this is the one he needs..... so if you all can help me find one,it would be appreciated in a large way !

Re: Project truck dream 65"
 

Turn's out I'm still in need of a front bumper folks,looking for a strait and in good shape original,there was some major damage underneath the one I looked at today,so your help will be appreciated.:ito:

Re: Project truck dream 65"
 

In the shop again tonight. I'm building a mount for my A/C dryer. I'm not wanting to mount it in the traditional way...., at the rad support front,so I opted for inside the cab.

As it turns out,there only ended up being one good location after trying many.Access to the fittings will be a snap and the unit is now well hidden from view.

I'm pretty happy with all clearance and the fact I don't have to look at it now !

You might say I thinking outside the box !...., er ah the A/C box ! :lol: