Re: 1965 chevy truck one piece @a time
5 Attachment(s)
went by the shop after work and took some shots with my cell phone sorry if the pics look
fuzzy . they had the cab in place and the fire wall smoothed out pretty good the want the rear well wells so the can cut the metal for the bed to see how low the rear sets on the back so if i need to but drop spindles next week a long with the wheels for the right off set . |
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
:metal: more pics you know you like um :lol::chevy:
|
Re: 1965 chevy truck one piece @a time
4 Attachment(s)
here is a couple pics from the last two days at the shop ..
They cut and mocked up the inner wheel wells for the poor man prostreet and cut the metal plate next will be welding the angle strips in then have the plate and bed line x then when i get it home ill install the wood after i sand and poly the wood ... :metal::chevy: i likes how the plate has all the holes cut already no drilling . Took Murry an hour to program all the setting on the cutting table and 15 min to cut the plate . |
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
little update to night they capped the ends of the bed also filled in the stake
pockets primed and painted the metal plate for the bed and cut and trimmed the wood for the bed .. i hope that will add enough weight to the rear to keep the tires from spinning :metal: next week ordering wheels tires and drop spindles is sitting to high for the look i'm going for :chevy: |
Re: 1965 chevy truck one piece @a time
Looking Good! :metal:
|
Re: 1965 chevy truck one piece @a time
I really like the look of those bed rail end caps... :metal:
|
Re: 1965 chevy truck one piece @a time
Quote:
|
Re: 1965 chevy truck one piece @a time
Quote:
|
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
Ok it been little over month and a hafe no updates lately .
i when a got the cab about a week ago to prep the fire wall to paint i bought some drop spindles for it 2 1\2 and the wheels are ordered should be here tomarrow along with the wheel paint. the rear rims are 15x12 and the fronts are 15x6 with 26 inch front runners with 15x31x16:metal: |
Re: 1965 chevy truck one piece @a time
3 Attachment(s)
ok so i goofed on the tires 31x16x15 :lol: just a couple of more
they will work on it a little tomarrow and thursday then off to the LSRU in Austin . and if its not raining :waah: |
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
Spent a little time in the shop tonite rains coming back for the weekend :waah:
need to get the new wheels painted and going tomarrow to get the tires mounted .:metal: |
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
:chevy:
|
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
the fronts are 15x6 3 in back spacing rears are `15x12 9 inch back spacing :metal::chevy:
|
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
finally a project that didn't take a month do get done ! got the tires mounted and rims painted in 24 hrs :lol::metal::chevy:
|
Re: 1965 chevy truck one piece @a time
That little air breather filter on your rear differential, any chance you could tell me where that came from?
|
Re: 1965 chevy truck one piece @a time
1 Attachment(s)
Hi Murphy i bought it at oreally's auto parts in there speed section in the store should find it any were its called a spectre cone filter
here's a pic |
Re: 1965 chevy truck one piece @a time
Those are some huge big meats on the back!
|
Re: 1965 chevy truck one piece @a time
Quote:
thanks !! :metal: |
Re: 1965 chevy truck one piece @a time
9" of back spacing. Holy Smokes Man them are some monsters. Dig It!
|
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
went by the shop tonite and took some shots of that they did from tuesday
and wensday first couple are from tuesday nite with the taller spring in the rear and bump stops in .. took the bump stops off and went smaller on the rear coils and more room and no rub issues:metal: |
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
couple more i=of the tires and the headers mounted
have to have the headers modified on the driver side of were it was going to hit they are chevelle headers :lol: |
Re: 1965 chevy truck one piece @a time
4 Attachment(s)
:chevy:couple more
|
Re: 1965 chevy truck one piece @a time
1 Attachment(s)
:ito:
|
Re: 1965 chevy truck one piece @a time
Like what Im seeing.
That 572 and those tires are gonna lay down some big'ol fatty black marks. |
Re: 1965 chevy truck one piece @a time
Got to keep an eye on this one looking really good
|
All times are GMT -4. The time now is 12:28 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com