Re: How about some pics of bagged 47-59
 

Shes getting there. Staring to work in the cab now.

http://i573.photobucket.com/albums/s...01/image-4.jpg
http://i573.photobucket.com/albums/s...01/image-2.jpg
http://i573.photobucket.com/albums/s...01/image-1.jpg
http://i573.photobucket.com/albums/s...01/image-5.jpg

Re: How about some pics of bagged 47-59
 

looking really good c6_rob loving the simple clean backhalf. really thinking about redoing the setup in the rear of mine!

Re: How about some pics of bagged 47-59
 

c6_rob what air ride are you running on your truck? the setup is nice and clean

Re: How about some pics of bagged 47-59
 

Thanks, its a kit I got off ebay. Tank, 8 valves, 2 compressors and switch box. The brackets and mounting etc are all my own work.

PM me and Ill give you the guys info for the air ride kit.

Re: How about some pics of bagged 47-59
 

Torrance? Hey Neighbor !

Re: How about some pics of bagged 47-59
 

Lookin good:metal: nice and not over complicated.:metal:

Re: How about some pics of bagged 47-59
 

Awesome To The Above Trucks.... Wicked !

Re: How about some pics of bagged 47-59
 

I know the regular wood bed kits look awesome. But has anyone ever seen/or done a sheetmetal/LineX bed ?

I'm throwing around the idea think it would be pretty killer ?
Posted via Mobile Device

Re: How about some pics of bagged 47-59
 

C6 ... What Rim an Tire Size Are You running looks hot .. Doing a 49 .

Re: How about some pics of bagged 47-59
 

Lowroder, im running a Coker G78-15 tire 3 1/4 whitewall. The rim is 7 or 7.5 wide with center backspacing. Based on my rough calcs this should almost touch the tops of the inner fender wells when slammed. The center backspacing should be ok in the rear with my chevy 10 bolt rear end. Your application may be different so choose the backspacing carefully. Im hoping that when I get together everything fits well (mainly speaking of width not height). It should if I measured correctly.
Posted via Mobile Device

Re: How about some pics of bagged 47-59
 

Cool tucks
Posted via Mobile Device

Re: How about some pics of bagged 47-59
 

Cool C6.... I Like The look..

Re: How about some pics of bagged 47-59
 

C6, that's awesome. Clean ride. Is that an s10 swap or original frame?

Re: How about some pics of bagged 47-59
 

Hey c6_rob. Thats a very tidy build. I am in the UK it's just my suburban is over at Starlite Rod&Kustom in Torrance having some work done before it comes to the UK shore

Re: How about some pics of bagged 47-59
 

Thanks guys. Its an original frame.

Re: How about some pics of bagged 47-59
 

I see that done all the time. Usually looks ok. Wood will always look better and be more valuable
Posted via Mobile Device

Re: How about some pics of bagged 47-59
 

If that's a 22's in front it will be the first time I seen one layed out. I need more info on this one please...

Re: How about some pics of bagged 47-59
 

Someone mentioned the ability to bag an original frame?
Where would one find more info about doing it to a 47-53 frame?

Re: How about some pics of bagged 47-59
 

keithcorcoran the info is definitely on this forum, just got to know what to look for. By what I've gathered here there are basically 2 main ways to drop your ride. One is bagged one is not. For not bagging and the cheaper route look up dropped front axle . the rear can be done by using lowering blocks to keep the original stuff. look up sids dropped axles and they have a write up on how to do it this way.If you want to go the bagged route you will have to go with an IFS (independant front suspension) of some sort. either a front clip or a weld in upgrade. and for the rear you would have to go c-notch and 4-link. here are some keywords to help- IFS original frame bagged original frame 1950 panel

Re: How about some pics of bagged 47-59
 

thanks for the info.
i almost feel like if you're going to do ans IFS up front and nothc the frame you might as well try to find a bagged s10 and do the frame swap.

that's probably because i don't know too much about it but if you're going to go that far with it.. might as well.

i DID see the drop axle writeup on sid's site.. that doesn't look too bad.
not quite as easy as hacking off a couple of turns on a coil spring but not too terrible.

thanks for the info.. i'll start doing some research.

Re: How about some pics of bagged 47-59
 

If your looking to bag a 47-55 1st series Porterbuilt fabrication is coming out with a kit that's going to involve all c10 spindles. Nate posted a pick on Instagram last week that showed it might be a trailing arm kit in the rear and a dropmember up front. Top notch!!
Posted via Mobile Device

Re: How about some pics of bagged 47-59
 

My bagged 3100:

"El Gordo 54"

This truck was left to die in a field for decades where it got the tender touch of Mother Nature. After getting it's fair share of bullet holes and broken glass my Builder rescued this beauty and gave me a call. 47-53 Trucks are common so that's why I decided to make this 1954 something special and uncommon. I'm planning on enjoying it for a few months and when the time comes it will be sold to the highest bidder on eBay. I will let the world dictate what this American Time Capsule is worth.

To see 40+ pics check me out:
Check me out on Instagram : Miayota
Website: miayota.blogspot.com
Youtube: Miayota

Features:
-73' Chevy C10 Frame swap
-Mega Wide Custom Fenders: We added almost 6" inches to each fender to give it a Wide Body look.
-15x12 Rear Wheesl (9" Lips) & 15 x 8's up front
-Chevy SB 350
-Automatic Transmission using the same 3 on the Tree original setup
-Reclaimed Tilt Wood Bed
-Full Air Ride Laying Side Steps
-Real Deal Bullet Holes from decades ago. "Damn Kids!!" LoL
-Currently working on a brand new interior
-All New Glass
-All Interior


http://i1215.photobucket.com/albums/...54Chevy-96.jpg
http://i1215.photobucket.com/albums/...54Chevy-75.jpg
http://i1215.photobucket.com/albums/...4Chevy-211.jpg
http://i1215.photobucket.com/albums/...4Chevy-128.jpg
http://i1215.photobucket.com/albums/...4Chevy-195.jpg
http://i1215.photobucket.com/albums/...4Chevy-172.jpg

Re: How about some pics of bagged 47-59
 

No mention on the site of his forum. I'll have to be patient. :)

Re: How about some pics of bagged 47-59
 

As someone who's currently fighting track width issues because I'm using a 1969 frame under my 50, this is awesome.
Posted via Mobile Device

Re: How about some pics of bagged 47-59
 

OMG!!! :jdp:


These wheels rules!