The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Projects and Builds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=205)
-   -   Cecil the 1953 5 window / S-10 / 5.7 TPI (https://67-72chevytrucks.com/vboard/showthread.php?t=642010)

lower50's 02-20-2015 02:44 PM

Re: Cecil the 1953 5 window / S-10 / 5.7 TPI
 
Great build. Amazing job on all the little touches!!
What brand of insulation was used on the floor? Thanks

skymangs 02-20-2015 09:11 PM

Re: Cecil the 1953 5 window / S-10 / 5.7 TPI
 
That was "peel and seal". Same composition as the expensive stuff, but cost about $40 to do the whole floor and firewall.

Low Elco 02-21-2015 08:11 AM

Re: Cecil the 1953 5 window / S-10 / 5.7 TPI
 
Awesome work, Chris!

skymangs 02-21-2015 10:06 AM

Re: Cecil the 1953 5 window / S-10 / 5.7 TPI
 
Thanks brother.!

oossuuu754 02-23-2015 10:44 AM

Re: Cecil the 1953 5 window / S-10 / 5.7 TPI
 
5 Attachment(s)
SKYMANGS:
Hidden square body tail gate links all finished up

Uncle Jimi 02-23-2015 12:47 PM

Re: Cecil the 1953 5 window / S-10 / 5.7 TPI
 
Quote:

Originally Posted by skymangs (Post 7058406)
That was "peel and seal". Same composition as the expensive stuff, but cost about $40 to do the whole floor and firewall.



The stuff at Lowes?

oossuuu754 02-24-2015 10:30 AM

Re: Cecil the 1953 5 window / S-10 / 5.7 TPI
 
2 Attachment(s)
SKYMANGS:Under body lights lightin...

Now if we can just get the Motor to run correct, sent the ECM back to Larry's Electric to see if it is bad, will hopefully hear something this week.

skymangs 02-24-2015 11:22 PM

Re: Cecil the 1953 5 window / S-10 / 5.7 TPI
 
Uncle Jimi; Yup, thats the stuff. Been very pleased with it.

Update on Cecil. I spent all day on the phone with Larry's Electric yesterday, diagnosing Cecil's run issue. (Runs great for about 40 seconds, then dies). It has continuous spark, fuel, and air, good fuel pressure, no codes, all injectors have been sonic cleaned and flow tested, IAC is opening and closing properly, all injectors are pulsing correctly. In other words, it should run great. By the end of the day they decided it must be a programming or ECM problem. Sent it off to them this morning. Hopefully they figure out what's going on and get it back in a timely manner.

In the mean time I'll be doing a few more little things to Cecil (since I've got the time).

oossuuu754 02-26-2015 10:50 AM

Re: Cecil the 1953 5 window / S-10 / 5.7 TPI
 
1 Attachment(s)
Chris it has to be the ECM and hopefully Larry's will get the replacement sent out soon.

On a side note if anyone from Oklahoma is following this thread please keep an eye out for my car hauler, some JackHole decided to steal it from driveway in broad daylight Tuesday.

Its a 20ft tandem, heavy duty axles and heavy duty big ball hitch!

ratty 46 02-26-2015 11:03 AM

Re: Cecil the 1953 5 window / S-10 / 5.7 TPI
 
That sux.

I hate thieves. Hopefully they'll screw up & the cops will catch them.

R46

Advanced Design 02-26-2015 11:24 AM

Re: Cecil the 1953 5 window / S-10 / 5.7 TPI
 
Well crap...hate that happened. Had my first new car we owned...86 Buick Grand National...stolen. Real downer. Hope they are caught.

skymangs 02-26-2015 03:41 PM

Re: Cecil the 1953 5 window / S-10 / 5.7 TPI
 
WTF is the world coming to?

ratty 46 02-26-2015 03:59 PM

Re: Cecil the 1953 5 window / S-10 / 5.7 TPI
 
It's (unfortunate) not what is coming to as it's already here. We need to go a bit backwards & take care of business as we use to.

It is SAD that you can't even leave your own property on your own property ... without some ****bag stealing it.

Some countries cut the hand off of thieves so everyone knows who the thief is ...

Again - that sux & hopefully it'll turn up.

R46

oldman3 02-26-2015 05:04 PM

Re: Cecil the 1953 5 window / S-10 / 5.7 TPI
 
754, I'm with the rest of the group, sorry it was stolen, hope it get's returned...Jim

HUSSEY 02-27-2015 05:08 PM

Re: Cecil the 1953 5 window / S-10 / 5.7 TPI
 
Can I ask about the steering column, do you recall the length or model no.? Looks like a perfect fit.

By the way, killer build thread! Just wish didn't have to read about your stolen trailer thread to come across it.

Uncle Jimi 02-27-2015 11:59 PM

Re: Cecil the 1953 5 window / S-10 / 5.7 TPI
 
Not trying to pour salt in your stolen trailer wound... however.... on the bright side.... (if there was one to getting your trailer stolen???)

Cecil now becomes a driver... Not a trailer Queen?!?!!?

iowaboynca 02-28-2015 02:00 AM

Re: Cecil the 1953 5 window / S-10 / 5.7 TPI
 
Quote:

Originally Posted by Uncle Jimi (Post 7069046)
Not trying to pour salt in your stolen trailer wound... however.... on the bright side.... (if there was one to getting your trailer stolen???)

Cecil now becomes a driver... Not a trailer Queen?!?!!?

True, but now he doesn't have a way to bring the next project home:waah:
hope you find it.

skymangs 02-28-2015 09:26 AM

Re: Cecil the 1953 5 window / S-10 / 5.7 TPI
 
Steering column is a 32" column from Gearhead enterprises. It is a pretty good fit.

oossuuu754 03-02-2015 10:43 AM

Re: Cecil the 1953 5 window / S-10 / 5.7 TPI
 
Quote:

Originally Posted by Uncle Jimi (Post 7069046)
Not trying to pour salt in your stolen trailer wound... however.... on the bright side.... (if there was one to getting your trailer stolen???)

Cecil now becomes a driver... Not a trailer Queen?!?!!?

Chris built this truck to be driven and he would kill me if Cecil became a trailer queen. Honestly I think he was worried when I asked him to put a trailer hitch on him. I had to promise him Cecil would only tow a my Harley on a rare occasion. ;)

oossuuu754 03-02-2015 10:45 AM

Re: Cecil the 1953 5 window / S-10 / 5.7 TPI
 
Quote:

Originally Posted by iowaboynca (Post 7069164)
True, but now he doesn't have a way to bring the next project home:waah:
hope you find it.

Yep, that's a problem. Already planning on the next project, and got a truck in my sights, just have to convince my Aunt to let go of it.

Advanced Design 03-02-2015 02:39 PM

Re: Cecil the 1953 5 window / S-10 / 5.7 TPI
 
Cool, what truck does your Aunt have?

oossuuu754 03-02-2015 03:12 PM

Re: Cecil the 1953 5 window / S-10 / 5.7 TPI
 
Quote:

Originally Posted by Advanced Design (Post 7072880)
Cool, what truck does your Aunt have?

It's C10, Fleet Long Bed. She and my Late Uncle are the Original Owners, I think. Been in her pasture since probably 2000.

lower50's 03-02-2015 07:00 PM

Re: Cecil the 1953 5 window / S-10 / 5.7 TPI
 
Quote:

Originally Posted by skymangs (Post 7058406)
That was "peel and seal". Same composition as the expensive stuff, but cost about $40 to do the whole floor and firewall.

Thanks skymangs I'll check it out :)
Sorry to hear about your trailer!!

oossuuu754 03-04-2015 11:30 AM

Re: Cecil the 1953 5 window / S-10 / 5.7 TPI
 
2 Attachment(s)
So we are still waiting to get the ECM back from Larry's Elec to see if that is the issue with the Engine Shutdown. In the meantime I did get my tag for Cecil. Think it will fit in perfect.

Spblack 03-04-2015 03:48 PM

Re: Cecil the 1953 5 window / S-10 / 5.7 TPI
 
Quote:

Originally Posted by oossuuu754 (Post 7044126)
SKYMANGS:
After the paint dried I starting the aging process on the visor and mirrors.

what did you use to spray it for aging?


All times are GMT -4. The time now is 03:10 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com