Re: "Geronimo" 54' 3100 LS built in PA
Quote:
|
Re: "Geronimo" 54' 3100 LS built in PA
Sweet!!!! Good progress.
|
Re: "Geronimo" 54' 3100 LS built in PA
3 Attachment(s)
2-27-18
inching closer. Got the TPS bracket made. between the sensor and the scrap material I had laying around and few hours I ended up saving 130-190 dollars, as I have ten bucks in the sensor. Go the air cleaner. I plan on painting it eventually along with these brackets. I plan to make some nice cnc made brackets this summer. I chose to put the TPS on this side bc the DS of the carb just seemed to be getting clogged up. Most TPS units have a cable or rod that attach to the arm of the sender and the carb lever. I was able to just butt the two up and let the carb arm come down and run the senders arm. I'v yet to test it and I'm sure it will need some tweaking, but for now I think it should work. Getting the Drive shaft tomorrow, so really once I wire up a few things its ready to test. Hoping by next weekend to do that. |
Re: "Geronimo" 54' 3100 LS built in PA
That last picture is a nice blend with the old and the new. Engine looks tall, almost like it has blower! Good stuff!
|
Re: "Geronimo" 54' 3100 LS built in PA
Good choice of air cleaner!
|
Re: "Geronimo" 54' 3100 LS built in PA
Good solution 99. Engine looks really good!
|
Re: "Geronimo" 54' 3100 LS built in PA
thanks guys. I really wish I woulda done some things different on the engine color scheme. but nothing to loose sleep over. yes I like the old and new. I really hope everything works out and I don't regret carbing the LS. its alot of work either way. Gonna try and work on some wiring this week and see if I can't get it fired back up and really hoping by next weekend I make a maiden voyage! Just got the driveshaft made up today!
|
Re: "Geronimo" 54' 3100 LS built in PA
You can't go wrong with a carb, try fixing fuel injection on the side of the road.
|
Re: "Geronimo" 54' 3100 LS built in PA
I'm not worried about he carb really, more or less the transmission controller LOL. but between the msd box and the transmission controller. just seems like your dependent on two companies product. not to mention all the stuff to actually make this work. I'v often thought why didn't I just go EFI! but I'm sure this will work out. I def wouldn't mind carbing another LS and putting my 5 speed behind it, no controller needed!
|
Re: "Geronimo" 54' 3100 LS built in PA
5 Attachment(s)
3-6
Had a short work weekend bc of bday party. But.... I did make a lot of headway. I'm very close to being able to fire this up with the ignition etc all hooked up. So yah I been working on wiring and making a alot of progress. I got all the engine stuff wired pretty much minus the Efan. Got carb choke done, got MSD box done, Trans controller about done, NSS wire up, all starter wires and battery cables, main wire harness pwr ran, got temp senders in the heads, just need the VDO gauge to work with the sender in head. I loom pretty much every wire I deal with also. Ignition is almost done, fuel pump is almost wired up. Got driveshaft made, need to paint it. My goal is to fire it up next weekend, maybe pop it into gear. Then once I get the temp gauge I can start running and driving it more and more. Pws lines are done also. Then just button everything up. I still need to do a tach and speedo conversion also. |
Re: "Geronimo" 54' 3100 LS built in PA
99, shouldn't be long now, nice work...Jim
|
Re: "Geronimo" 54' 3100 LS built in PA
https://www.youtube.com/watch?v=OXWi...ature=youtu.be
dunno why the embed video isn't working, I forget what little trick it is to get it to work these days. anyway. not the best video as I ran outta memory on camera and time today. But..... She starts up and the gears are working. need to bleed brakes and she'll be moving on her own. I still need to hook up the temp gauge and efan and get it all up to operating temp. |
Re: "Geronimo" 54' 3100 LS built in PA
Good progress!
|
Re: "Geronimo" 54' 3100 LS built in PA
Wow! You have been busy. Looks good
|
Re: "Geronimo" 54' 3100 LS built in PA
Good job buddy sounds great.
|
Re: "Geronimo" 54' 3100 LS built in PA
Nice! Always a good feeling when they fire up.
|
Re: "Geronimo" 54' 3100 LS built in PA
Nice work!
|
Re: "Geronimo" 54' 3100 LS built in PA
1 Attachment(s)
Thanks guys. Here is a pic of the trans controller handheld. What is really cool about this is, it will do live data so when I'm driving I can check trans temp and speed etc. It is also nice that my speedo output will wire directly into the trans cpu, so no special sending units required. I'll be doing a tach and speedo conversion soon, so they will look like stock gauges but function with a modern touch. The trans controller was easy to set up a tune. I'll try it out and adjust if need. I think it read my TPS just fine which is cool also.
gonna get some driving footage and all that soon! |
Re: "Geronimo" 54' 3100 LS built in PA
3 Attachment(s)
4-17 been slowing down a tad on the build. just alot going on again. But I should be wrapping this one up by next month. It will drive but I haven't taken it out of garage yet. Still working on wiring, but nearing the end of that. Got some chassis saver on the front fenders and grille, gonna raptor line them also. then I can put the front clip all back together. Windshield I bought from summit came with a chip in it, so not sure what I'm gonna do yet. Need to get doors back on. Still waiting for the seat at the upholstery shop, taking forever.
but on a brighter note, I dug myself some more debt with another patina truck 51' (my fav year!!) missing a fender and one door is roached out, but overall the truck is pretty darn solid. Got it out west. also the green truck I had my friend buy, I told him I'd go in on building it and then sell it as a project. Its on an s10 frame and very solid as well. I may sell or build this blue patina truck this year. after I finish geronimo I am going to try and get my 51' back on the road so I can have something to drive! |
Re: "Geronimo" 54' 3100 LS built in PA
Which is the green truck again? I'm getting confused....
|
Re: "Geronimo" 54' 3100 LS built in PA
green truck is the "green" truck in the first picture, its the 52' (52', 49', 51' in pic) I don't plan on doing a full build to it, but if I do, I'll post up a thread. one of the two patina trucks I plan to do a full build later this year with. Bagged, Stock frame, LS engine etc.
|
Re: "Geronimo" 54' 3100 LS built in PA
nice looking unit. just as a thought when you get time, you may want to install a "U" shaped fitting on your heater hoses so the coolant can flow through there. I think it needs to have flow. maybe a read on this site will help when you get time.
http://www.pirate4x4.com/tech/billav...CoolingSystems |
Re: "Geronimo" 54' 3100 LS built in PA
Im hooking heater hoses up soon anyway, but thanks yes you are right it would need more flow if I ran it alot. I'v ran it up to temp and it was fine. but I would def rec a U shape heater hose.
|
Re: "Geronimo" 54' 3100 LS built in PA
some copper pipe fittings from home depot would likely suffice.
|
Re: "Geronimo" 54' 3100 LS built in PA
That trans controller will be really nice to fine tune when driving. Ya get your '51 working again and we can go for a cruse together in October.
|
Re: "Geronimo" 54' 3100 LS built in PA
bob, that is the plan, but I keep buying trucks I dunno what is wrong with me!!!! I gotta sell some get some funds to finish my 51'. October sounds about a good time to have it done by. sooner would be nice.
|
Re: "Geronimo" 54' 3100 LS built in PA
5 Attachment(s)
5-23 If any of you are still following this drawn out build. Some updates. Got front clip on. Got all the lights working and most of wiring done, just need to wire up tail lights. Got one door on and still need to adjust it and put weather strip on and glass in, then windshield. Got bed on for good. Got the fuel filler pretty much done. Need to put pass side door and running board on. Need to hinge and set the hood.
Been waiting on the seat at upholstery for over 2 months, I'm about to just take it to someone else. Need to do up gauges in inside and button up a few other things. Will be test driving it soon and praying the shakedown won't eat up my whole summer! The front does set a tad higher at this point, I did set it up to be level so once the springs level out I think the stance will be perfect. |
Re: "Geronimo" 54' 3100 LS built in PA
99, still following, and waiting for the video of the test drive...Jim
|
Re: "Geronimo" 54' 3100 LS built in PA
yah Jim, you and me both!!!! I'm gonna have to sit on a bucket till the seat is done.
|
Re: "Geronimo" 54' 3100 LS built in PA
1 Attachment(s)
Oh, for all you AD guys. You should try an make it out to the AD Nationals in Franklin Indiana this year. Sept 15th weekend. I did this design and printed some shirts to spread the word. We'll be printing a bunch more for the event with sponsors on back. This picture is super low quality, sorry.
|
Re: "Geronimo" 54' 3100 LS built in PA
Glad to hear it is coming together. Oh I'll be at the show and I might even buy a T-Shirt lol
|
Re: "Geronimo" 54' 3100 LS built in PA
Good to see everything coming together.
The truck is looking great! Nice job! |
Re: "Geronimo" 54' 3100 LS built in PA
2 Attachment(s)
5-28
Thanks guys, its really so close. Got the rear lights all working. It was a PIA trying to find original napa lights that fit in this rear bumper. So I found a set that advance and tractor supply sell that just squeeze into the biggest opening in the bumper. We will prolly just put reflectors in the smaller ports. I also finalized the fuel filler. It was a very drawn out hour eating process. My whole issue was I didn't cut the original bed floor out and raise it. He wanted to keep the original bed and it wasn't coming apart easily. So I was just able to get this to work, using a blazer 20g fuel tank and the filler is modified and from I think a 2000 silverado or something similar. |
Re: "Geronimo" 54' 3100 LS built in PA
That bumper is huge. Nice work
|
Re: "Geronimo" 54' 3100 LS built in PA
it is and very heavy. I didn't like it at first, but now its growing on me.
|
Re: "Geronimo" 54' 3100 LS built in PA
Are you planning to attend the show?
|
Re: "Geronimo" 54' 3100 LS built in PA
I'd like to, but if I do I most likely wouldn't be bringing any trucks. I got too many irons in the fire as it is. Its a ways away, but you know how fast summer ends and you don't have half of your to do list done!
|
Re: "Geronimo" 54' 3100 LS built in PA
4 Attachment(s)
6-9 Got windshield in, was a little nervous bc it had a chip in it, but I epoxied it. I think its good, only my second 54' windshield I'v done. Finally got the seat back. this was out of a 98' chevy truck and I knew from the getgo the shape was way too modern. But, its hard to find bench seats and esp one that will fit. So the upholster had to do some customizing to it. I think it turned out pretty good. He charged us $350 and took over two months. I didn't mind the price and the wait, but the communication lacked. We knew the blue wasn't going to match the truck, but.... I just hope that won't be an issue down the road with wanting to change it up. I'll be making door panels out of the tan material.
Tons of little things to do that really make me say "why don't I remember how much work really goes into these things". It drives me nuts getting down the final touches and all the things we still have to buy. |
Re: "Geronimo" 54' 3100 LS built in PA
Looks good Henry...Jim
|
Re: "Geronimo" 54' 3100 LS built in PA
Wow, that seat looks really good!
|
All times are GMT -4. The time now is 05:54 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com