Re: 85 GMC Sierra Classic 1 Ton Crew Cab
Looking good Matt!
|
Re: 85 GMC Sierra Classic 1 Ton Crew Cab
Quote:
Quote:
|
Re: 85 GMC Sierra Classic 1 Ton Crew Cab
Got the two other pieces cut that I need to cut for the driver side of the frame.
http://i167.photobucket.com/albums/u...ps4a5460ec.jpg http://i167.photobucket.com/albums/u...psba674bb0.jpg Got one on the passenger side cut and fitted into the frame, have one more cut out for the passenger side still needs fitted and the last one still needs cut out and fitted. Going to head back to the shop here soon. |
Re: 85 GMC Sierra Classic 1 Ton Crew Cab
And here are the last pieces cut and fitted.
http://i167.photobucket.com/albums/u...psa222fb2c.jpg http://i167.photobucket.com/albums/u...ps57f8bb56.jpg |
Re: 85 GMC Sierra Classic 1 Ton Crew Cab
Better get to burning wire, son.
also, i hope you trim that rec. tube. itll get all in the way when you bag the rear hangin down like that |
Re: 85 GMC Sierra Classic 1 Ton Crew Cab
Ive tried to tell him but he doesn't listen... lol jk matt
BTW Ryan quit putting ideas in peoples heads! haha |
Re: 85 GMC Sierra Classic 1 Ton Crew Cab
;)
|
Re: 85 GMC Sierra Classic 1 Ton Crew Cab
Quote:
Quote:
|
Re: 85 GMC Sierra Classic 1 Ton Crew Cab
Quote:
|
Re: 85 GMC Sierra Classic 1 Ton Crew Cab
|
Re: 85 GMC Sierra Classic 1 Ton Crew Cab
Quote:
|
Re: 85 GMC Sierra Classic 1 Ton Crew Cab
Looking good Matt! Next you need one more turbo, one more clutch disc, and no rear leaves. Haha :mm:
|
Re: 85 GMC Sierra Classic 1 Ton Crew Cab
Quote:
Posted via Mobile Device |
Re: 85 GMC Sierra Classic 1 Ton Crew Cab
Well first up my shop is a mess!
http://i167.photobucket.com/albums/u...ps23f00835.jpg I then drilled all of my bed bolts through the bottom of the frame as well. http://i167.photobucket.com/albums/u...ps26afd9ac.jpg And I finally got my plates all tacked into place. http://i167.photobucket.com/albums/u...ps608fc796.jpg http://i167.photobucket.com/albums/u...ps9f2ea9d3.jpg http://i167.photobucket.com/albums/u...ps68c3beb9.jpg Now to just sling 32 feet worth of weld bead at it! |
Re: 85 GMC Sierra Classic 1 Ton Crew Cab
You're not done yet? :lol:
So, did you tunnel all the way to Iowa from Kansas and get one of my air bags today, and that's why you're not done welding yet? :lol: And weld those extra holes shut son! |
Re: 85 GMC Sierra Classic 1 Ton Crew Cab
Quote:
And yes I did, but you came in right after I grabbed the first one so I couldn't steal the rest. :lol: HELL NO. Do you know how many holes are in these damn frames? |
Re: 85 GMC Sierra Classic 1 Ton Crew Cab
So today I bought one of these.
http://i167.photobucket.com/albums/u...ps520ded84.jpg And did this to it. http://i167.photobucket.com/albums/u...psc4c3a631.jpg And it makes a shape like this. http://i167.photobucket.com/albums/u...ps5b88ac64.jpg and that is all you get till the next update. :lol: |
Re: 85 GMC Sierra Classic 1 Ton Crew Cab
:lol: I like your little tools to hold the metal together!
|
Re: 85 GMC Sierra Classic 1 Ton Crew Cab
Looks sweet, those little clamps look handy. now.... why didnt you have that broke wherever you had it sheared? i suggest some inside and outside weld on that baby on the bottom of the tank. and clean the shaz out of the joint area. get all the black surface coat off the edges where you are gonna weld to make sure it is a good weld so you dont have leaks in the future
Ryan |
Re: 85 GMC Sierra Classic 1 Ton Crew Cab
Yeah the clamps are apparently for making picture frames they seem to wrk tho! And I didn't have it broke because I'm young and dumb and didn't think about that. Apparently I like to make things harder on myself. I planned on welding the bottom inside and out. Know of a good coating to put inside one of these bad boys?
Posted via Mobile Device |
Re: 85 GMC Sierra Classic 1 Ton Crew Cab
Also having it broke would have taken two sheets of 4x8 with the size of this tank.
Posted via Mobile Device |
Re: 85 GMC Sierra Classic 1 Ton Crew Cab
Quote:
Picture frames, gas tanks, its all the same thing. i have looked into some coatings. still have not decided for sure what i am going to use. KBS is supposed to be good **** and so is Caswell Quote:
|
Re: 85 GMC Sierra Classic 1 Ton Crew Cab
Quote:
I did not buy the steel from the guy that sheared it for me. It was cheaper for me to drive 30 mins away and buy the steel then take it to him to shear it. He asked me what I paid for the sheet and he said he cant even buy it for that cheap so thats why I only wanted to buy 1 sheet. |
Re: 85 GMC Sierra Classic 1 Ton Crew Cab
Well today I finally was able to start messing with the tank. I got it all tacked up and test fitted it. But now the tip on my welder is warn out so I cant weld it anymore till I go pick up more tips.
http://i167.photobucket.com/albums/u...psb599761c.jpg Seeing if the baffles fit, still have to cut holes in them. http://i167.photobucket.com/albums/u...pscd13ced3.jpg http://i167.photobucket.com/albums/u...ps4f7116da.jpg http://i167.photobucket.com/albums/u...ps7845fcff.jpg Also had the front clip on to check for tire clearance and took a pic of it. http://i167.photobucket.com/albums/u...psf540423b.jpg |
Re: 85 GMC Sierra Classic 1 Ton Crew Cab
Looking good Matt! Make sure you get a package of tips and an extra roll of wire for back up. :lol:
|
Re: 85 GMC Sierra Classic 1 Ton Crew Cab
I have gotten the baffles and the sump put into the tank today. I am working on getting this bottom half all welded up so that I can check the bottom half for leaks.
http://i167.photobucket.com/albums/u...psa79451aa.jpg http://i167.photobucket.com/albums/u...ps396981c1.jpg http://i167.photobucket.com/albums/u...psad2700ae.jpg Need to then start mounting the tank before I go about adding the sending unit, filler and all of the fittings needed for the fuel tank. |
Re: 85 GMC Sierra Classic 1 Ton Crew Cab
Looks good! I like what you have done to the truck so far! Can't wait to see how the tank turns out.
|
Re: 85 GMC Sierra Classic 1 Ton Crew Cab
How do you plan to check for leaks?
Ryan |
Re: 85 GMC Sierra Classic 1 Ton Crew Cab
Quote:
Quote:
|
Re: 85 GMC Sierra Classic 1 Ton Crew Cab
Quote:
|
Re: 85 GMC Sierra Classic 1 Ton Crew Cab
Quote:
|
Re: 85 GMC Sierra Classic 1 Ton Crew Cab
Ok I guess I understood my dad wrong, he said turn the tank over and trap the air in the tank and push it under water. I guess we will probably try that and if it doesnt work then I will weld the top on.
|
Re: 85 GMC Sierra Classic 1 Ton Crew Cab
that is better, but youll want some soapy water to spray the seams with. i doubt youll be able to totally submerge that tank. that is a lot of buoyancy.
ryan |
Re: 85 GMC Sierra Classic 1 Ton Crew Cab
Quote:
When I check tanks and stuff, I use a pressure regulater and soapy water like Ryan mentioned. I also learned the hard way on water while testing an oil pan I modified................ |
Re: 85 GMC Sierra Classic 1 Ton Crew Cab
Quote:
Quote:
|
Re: 85 GMC Sierra Classic 1 Ton Crew Cab
Before underground storage tanks for gas stations are set and buried, they are pressurized and a pressure gauge is installed. Simply let it sit overnight and see if the pressure dropped. No change means no leaks. If it's good enough for fuel in the ground, should be good enough for a truck. I would use a decent 0-10psi or similar gauge and pressurize to 10psi. Spray seams with soapy water.
Also, Ultra Low Sulfur Diesel fuel is very nasty on steel, causes it to rust pretty bad over time. Don't know why, but I would think about a spray on coating designed for fuel tanks. I'm sure there's something out there for this application. Awesome build thread too! |
Re: 85 GMC Sierra Classic 1 Ton Crew Cab
40 gallon of air at 10 psi would probably blow this damn tank up. I plan on getting a coating kit for the inside.
Thanks man! Posted via Mobile Device |
Re: 85 GMC Sierra Classic 1 Ton Crew Cab
I did get the tank all welded up yesterday, but stopped there cause I think this changing weather is starting to make me sick.
http://i167.photobucket.com/albums/u...psb4074db7.jpg Waiting on a bunch of parts to come in for the tank. Pretty sure I have everything figured out but going to wait to put the fittings in the tank after it is installed so that I can make sure I have clearance for everything. I have also decided to put the filler in the bed. I dont haul to much stuff and we bought a 16 foot trailer a couple months ago so i should be good to go with that. Plus me and sheet metal are not friends so there is no way I could move a fuel door to the back and make it look good. |
Re: 85 GMC Sierra Classic 1 Ton Crew Cab
You could move the door, just tack tack... tack it in.
Posted via Mobile Device |
Re: 85 GMC Sierra Classic 1 Ton Crew Cab
Yeah the one time I did some body work cutting out pannels I messed it up bad. People may not like the filler in my bed but doest really matter to me. Works for me!
Posted via Mobile Device |
All times are GMT -4. The time now is 06:44 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com