Re: Shrunken66Stroker's build thread.
Quote:
|
Re: Shrunken66Stroker's build thread.
any updates
|
Re: Shrunken66Stroker's build thread.
Quote:
|
Re: Shrunken66Stroker's build thread.
Quote:
|
Re: Shrunken66Stroker's build thread.
You got a great stance on your truck. How much did you lower it?
|
Re: Shrunken66Stroker's build thread.
don't know the exact measurement, but the front cross member will sit on the ground with the air all the way out. when it's aired up it's about 6 inches off. the pic of it back a couple of pages is with the air out. I can't drive it like that because the tire is sitting on the inner fender.
|
Re: Shrunken66Stroker's build thread.
it's been awhile .....how are we doing?
|
Re: Shrunken66Stroker's build thread.
Unbelievably busy. Thanks for asking. If I have the time to work on the truck, I don't have the money and when I have the money, I don't have the time. There's a new years resolution in order.
Quote:
|
Re: Shrunken66Stroker's build thread.
A Know what you mean about being down for a while and wanting to drive you rod. i am starting back on mine and hope to drive it for the summer but we will see. By the way awesome build
|
Re: Shrunken66Stroker's build thread.
if your alive and kicking you'll find time!!!!!!!! that should be a resolution for alot of us. when i started seriously pasteing my self to this sight there were alot of great builds going on. now it seems they've all "fizzled" out.
|
Re: Shrunken66Stroker's build thread.
Quote:
I hope I can keep it. :lol: |
Re: Shrunken66Stroker's build thread.
Quote:
|
Re: Shrunken66Stroker's build thread.
Quote:
|
Re: Shrunken66Stroker's build thread.
Thanks 63short. I'm also raising kids and trying to keep the wife happy. It's a delicate balance but sometimes the wife will just have to be pissed. I'm going to try and get it drivable by summer. Pay no attention to all of the deadlines in my thread that I've blown by. This one's for real.
Quote:
|
Re: Shrunken66Stroker's build thread.
Hey Greg. I like you resolution. I may take that one for myself. I hope you stick with it and we see that 66 in action soon... Have a Happy New Year!!
JC |
Re: Shrunken66Stroker's build thread.
Thanks Joe. Happy New Year to you too. I'm trying to make time, believe me. I'm about to hit the 4 year mark and I want to drive the old girl before I die. Seriously, I day dream about driving it all the time and can't wait to actually get in and fire it up.
Quote:
|
Re: Shrunken66Stroker's build thread.
We have the same dream. :metal:
|
Re: Shrunken66Stroker's build thread.
festering bump...........
|
Re: Shrunken66Stroker's build thread.
Nice! Thanks for the motivation. I actually spent all day out in the garage cleaning and organizing stuff so I can make some progress next week. I might have enough money to pull the trigger on the transmission I want. I'm planning on getting the new Tremec RS 500 5 speed. Wish me luck. Thanks RAD.
|
Re: Shrunken66Stroker's build thread.
Oh, I'm getting the machine work done on my LS2 right now. I'm going 4.030 bore and standard stroke to make 370 cubes. If I had another grand I could buy the stroker set up and make a 408. I'm still trying to sell my old 350 on craigslist, but no luck yet.
|
Re: Shrunken66Stroker's build thread.
Dont lose it man.....get it together so it will move and you'll be all fired up again. I miss seeing all the fabulous work you do.
|
Re: Shrunken66Stroker's build thread.
I never loose the desire to work on it. I think if I could start it up and hear it runs some time soon, that would be a huge fire under my arse.
|
Re: Shrunken66Stroker's build thread.
Was this truck for sale on craigslist??
|
Re: Shrunken66Stroker's build thread.
Quote:
|
Re: Shrunken66Stroker's build thread.
Quote:
|
Re: Shrunken66Stroker's build thread.
keep the fire!!!
|
Re: Shrunken66Stroker's build thread.
1 Attachment(s)
I aired it all the way up and rolled it out of the garage the other day to organize and get ready to tear into it again. It's been far to long since I made any progress. I did get my ls2 block decked, honed, cam bearings installed and rotating assembly balanced last week. I've got to get a cam and oil pan and I'll be ready to build it. I did a test fit with some SBC to LS adapter plates I made. I'm going to have to do a little reaming but it's close. More soon.
|
Re: Shrunken66Stroker's build thread.
well its good to hear,i think i rember something about a new years resolution
|
Re: Shrunken66Stroker's build thread.
Love this build.
|
Re: Shrunken66Stroker's build thread.
Thanks Delmo. Yes, RAD I'm trying to stick to my new years resolution and get something done. I've been shopping for transmissions and I think I've decided on the new Keisler RS500. It's an update to the TKO stuff and the price is a little cheaper. I'll try and update more frequently and not fall off the map again.
|
Re: Shrunken66Stroker's build thread.
cool beans
|
Re: Shrunken66Stroker's build thread.
Quote:
|
Re: Shrunken66Stroker's build thread.
That's big praise from a couple 60-66 veterans. I'll see if I can live up to it.
And RAD, change that damn profile pic! |
Re: Shrunken66Stroker's build thread.
Seen your headers there.how much clearance do you have between #1 and the header?
|
Re: Shrunken66Stroker's build thread.
Johan, if you're talking about the number 1 exhaust tube and the CPP mount, there wasn't any clearance till I took a 1/4" off of the mount. Now there's a ton because the motor is on a stand about 10' away from the truck. I've got it on craigslist again, because I need some cash for a new trans to go with the ls2.
|
Re: Shrunken66Stroker's build thread.
4 Attachment(s)
I got the adapter mounts done and bolted the block in. Then I thought, what if I just put on the heads to see where they'll sit and what if I put the intake and throttle body on and what about the engine cover? And this is where it ended up.
|
Re: Shrunken66Stroker's build thread.
Yes.:metal::metal::metal: Fire it up.:smoke: hell your done.
|
Re: Shrunken66Stroker's build thread.
It might need a gasket or two, a rotating assembly and a few other parts, but it didn't stop me from taking a mental test drive. Trans and bell housing are on the way.
|
Re: Shrunken66Stroker's build thread.
Man that looks great!
|
Re: Shrunken66Stroker's build thread.
thats how you keep the vision
|
All times are GMT -4. The time now is 06:47 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com