Re: Project Vitamin C-10
 

:thumbs:

Thanks for the suggestion Bill. The wood spacers I have in there right now are 3/4" oak hardwood floor. That's the same thickness of the replacememnt floor, right?. ;)

:haha: At your alignment problems.

They offered to get us a swamp cooler at work, but thought it wouldn't be a good idea around bare metal and filler.

Thanks Karl, you are right about affecting other things. I took some pics posted below of all the mounting areas. I'm sure it's something simple that I over looked, I hope.

I agree with you. It looks like the bed is down in the rear or up in the front.

:agree:

Here are some pics of all the bed and cab mounts. I got the cab bushings from a guy on ebay that said he didn't like them. The other thing I thought about is the cab bolts are not tight. Do y'all think the bushings will compress that much? They are poly bushings and I don't think they will. One the bed I installed the 1/4" rubber blocks that are repops form some supplier.

http://67-72chevytrucks.com/gallery/...edium/1282.JPG

The two top cab bushings look differrent. I thought they should be the same. I just noticed that while reviewing the pics. I don't know if there is a thickness difference yet.

http://67-72chevytrucks.com/gallery/...dium/13110.JPG

http://67-72chevytrucks.com/gallery/...edium/1343.JPG

http://67-72chevytrucks.com/gallery/...edium/1328.JPG

http://67-72chevytrucks.com/gallery/...edium/1302.JPG

Radiator support

http://67-72chevytrucks.com/gallery/...edium/1391.JPG

http://67-72chevytrucks.com/gallery/...dium/14110.JPG

Re: Project Vitamin C-10
 

Swamp coolers do not work in humidity. Air conditioning dries the air, swamp coolers add moister to the air. They work great in a dry climate like here in the high desert.

Re: Project Vitamin C-10
 

Alan, Is that a spacer i see between the cross sill and the frame pedestals? If so, that is your problem. Take it out, the cross sills sit down flat on the pedestals.

http://i537.photobucket.com/albums/f...thvin/1328.jpg

Re: Project Vitamin C-10
 

It's a 1/4" rubber shim. I put it in there because they are sold to replace the old ones. I talked to 198Plus and he said he runs a thin piece of rubber. It will definately help by it not being there. The next time I go out to the shop I will remove them.

Here are the rubber blocks that I am referring to. By the discription it says "bed wood mounting pads." Does that mean they go between the wood and the crossmembers? That still doesn't make sense.

Pic Courtesy of truckandcarshop

Re: Project Vitamin C-10
 

That is interesting Alan. I have never seen any such thing on any of these trucks originally. I would leave them out and see how the bed sits. A 1/4 inch there might make a big difference on the exterior body lines. My 61, 64, & 66 beds did not have these when i torn it down from their original condition. If i used anything at all i would not use anything thicker than a bicycle tube. There is really no need for it anyway. Once the bed is pulled down tight it should not be moving on the pedestal. Let me know if taking them out helps.

Re: Project Vitamin C-10
 

When I disassembled my bed there were no pads present and I was wondering why Mar-K had included them. Now I know I'm not the only one that didn't have the rubber spacers between the cross sills....Vernski:metal:

Re: Project Vitamin C-10
 

Thanks for the help and info. I removed the rubber pads tonight pics below. I still don't know where they are supposed to go.

Thanks Vern, just for clarification Mar-k didn't include them in my order. I got them some where else.

Removed the rubber pads. It is better, but not there yet. the passenger side is actually really close to where it needs to be. I looked at the passenger side rear cab mount and it has an extra washer just under the cab. There is one that stayed on the cab during the repair process. It looks like a permenant piece. Could it have been added at the factory? More than likely it was added during it's life. The driver side is still 3/8" off. I'm going to install a spacer under the drivers side rear cab mount to see if it will match the other side.

Re: Project Vitamin C-10
 

Alan,

I know what is part of the problem!!!

One of your floor supports is wrong size in height. The middle floor brace should be a thin floor brace your pics appear to have a standard height one in there which would throw it off about that 1/2 inch or more

per mar-k site the middle one is the short one
you should have three
one short in height and 2 taller ones

I also remember when I disassembled mine it had the short floor brace in the middle in front of the wheel tubs

Re: Project Vitamin C-10
 

Alan here's a couple pics of the wheels......Their dirty.

http://i88.photobucket.com/albums/k1...1/DSCN0170.jpg

Here's a couple more......

http://i88.photobucket.com/albums/k1...1/DSC_0305.jpg

http://i88.photobucket.com/albums/k1...1/DSCN0166.jpg

Here's a clearance shot.......

http://i88.photobucket.com/albums/k1...1/DSCN0171.jpg

They really need a good home :lol:

Re: Project Vitamin C-10
 

Kevin, there are actually 3 tall and one short. To the best of my knowledge they are where they need to be. The main bed bolts go thru them and into the frame. Here is a pic from my archive. The bed is standing on it's front.

http://67-72chevytrucks.com/vboard/a...1&d=1186628490

Thanks for the pics Ronnie, your truck is not dropped. Mine is down in the rear 4". I have clearanced my rear bedsides to accomendate the truck rallys on a 72 rearend. The tires on the truck rallys are also 255/70. Do you have a package deal price for a broke fellar? ;)

Worked on lining up the bed and cab. I ended up installing 2 of the old cab mount washers under the left rear cab support. Then I installed 2 of the rubber cushions under the right rear of the bed and one on the left rear bed sill. That also leveled my bed out with the cab looking at it from the rear. I will install the rear bumper and check the alignment with the bed.

In hindsight I should have done more checking of body lines and shim placement (if they exist) during teardown. Also check the frame. The lessons we learn.

Re: Project Vitamin C-10
 

looking good.you will be driving it before long.

Re: Project Vitamin C-10
 

Yep you are right! Sorry my mistake! I missed the note on the Mar K site too, I guess one of mine was just missing then, one more thing to add to the list of what i need

Re: Project Vitamin C-10
 

alan have any updates?? it's been a week, lol!! i know i know this heat sucks!!

Re: Project Vitamin C-10
 

Got a little something to show. ;) Got my old rear bumper installed to check alignment. Alos some pics of my new work area at my day job. More room and less interuptions. There is one other bodyman in here with me.

Ronnie, I also included a pic of the clearance between my bed and tire. You can also see your bumper on the metal shelf at my work.

Re: Project Vitamin C-10
 

Got my shirts made.

Re: Project Vitamin C-10
 

Shirts look good Alan ... what is the plan for tire clearance???

Re: Project Vitamin C-10
 

Re: Project Vitamin C-10
 

shirts really look good,trucks coming along nicely too.

Re: Project Vitamin C-10
 

Tire and fender clearance was a concern of mine when I changed axles.
I wanted to stay with my 6 lug rims and had to look quite a while to find a '69 6-stud axle in a 3.07 ratio. The later axles are wider by about 1.5"

Things are coming together nicely
So any long range rough estimate of the first drive?? I bet you are ready.....:chevy:

Re: Project Vitamin C-10
 

I'm liking the shirts, why ya blocking out the number.......If you don't want to show your number just put mine on there :lol:

Re: Project Vitamin C-10
 

Nice work area !!!!

Re: Project Vitamin C-10
 

Looking very nice. So how did you end up getting the bed lined up right?
Posted via Mobile Device

Re: Project Vitamin C-10
 

Not sure if your still dealing with the bed, but here is a shot of my 65, right after i pulled it, did not have any type of bushings in it

Re: Project Vitamin C-10
 

:thumbs:

i have a 72 axle in it and you are right the axle is 3/4" wider on each side which is creating my clearance issue.

At the rate I'm going it will be another 4 years before it is on the road. J/K I don't think I will make any shows this year with it.

As far as my number, once it is posted on the internet I can never take it off. I know this forum is full of good people, but I don't need a higher pnone bill. ;)

Lots of room for sure. Too bad the paint shop is in another building.

Shimmed up the right rear of the bed and left rear of the cab.

Thanks for the pic. I'll double check everything. ;)

Re: Project Vitamin C-10
 

Very nice lookin shirts Alan.
Posted via Mobile Device