Re: What did you do to your truck today?
 

Where did the seat cover come from ?
Posted via Mobile Device

Re: What did you do to your truck today?
 

I had it custom made by Ricks Upholstery in Tennessee (They are absolutely amazing to deal with) awesome price and made it just the way I wanted it!
Posted via Mobile Device

Re: What did you do to your truck today?
 

Thanks! The Chevrolet piece is actually all chrome. The photos are not that great because I took them with my phone.
Posted via Mobile Device

Re: What did you do to your truck today?
 

I really applaud the design and installation. The sharp contrast grabs attention, the pleated portion makes it look old school, while the upper panels and color separation around the sides make it look vintage. Just an excellent execution all around. I think that might be the most attractive bench seat/upholstery I've ever seen in one of these trucks.

Re: What did you do to your truck today?
 

Knocked about a 1/2" long dent out of my right parking light bezel. Aluminum is sure a lot easier to repair than stainless steel.

Re: What did you do to your truck today?
 

Installed my long awaited rear sport bumper.

Re: What did you do to your truck today?
 

Disconnected the fuel line from the carb and stuck it in a bottle and cranked the engine over a couple times to fill the bottle up , so i could pour the fuel in the lawnmower to mow the lawn....:lol:

Re: What did you do to your truck today?
 

I had to totally remove my "custom" gas tank for the same reason! :lol:

Re: What did you do to your truck today?
 

Haha I like your wheel chalk also......:metal:

Re: What did you do to your truck today?
 

Hey, it works! :lol: I had one behind the opposite front tire also. I didn't want to trust it to stay in place solely by the fact that it was in gear. The e-brake is not hooked up, and with a PO swapping the axle, I am not sure how to hook one up yet. Oh well, other things to deal with first!

Re: What did you do to your truck today?
 

side pipes

Re: What did you do to your truck today?
 

Got my new A/E rad today, and picked up some J-Nuts to mount my new speakers. Sucks that the rad comes from China. I did place an order with one of those classic truck parts co's, and almost all of it was made in the US, so that made me feel better.

Re: What did you do to your truck today?
 

I like your stance, could you detail your setup?

Re: What did you do to your truck today?
 

2" drop springs and 2.5" drop spindles in the front and 4" spring in the rear. no wood in the bed

Re: What did you do to your truck today?
 

Finished power steering swap.

Re: What did you do to your truck today?
 

looks good, what shocks are you running? Is that a 60 grill?

Re: What did you do to your truck today?
 

Are those connected, and if they are how do they sound? And where did you find them? I haven't seen any like that for a long time.

Re: What did you do to your truck today?
 

Painted my rear springs today. I was thankful it was warm enough to spend time in the garage.

Re: What did you do to your truck today?
 

They are connected and sound good. No drone while i was on the freeway. Sounds good at idle. At a constant speed the sound dies off and becomes just a low hum. got them from summit racing

Re: What did you do to your truck today?
 

thanks. i have the stock shocks. havnt swaped the cpp lowering shocks. grille is from a gmc. If i remember correctly 60-66 gmc grilles are the same, in '66 they changed the letters from the roundish version to squared.

Re: What did you do to your truck today?
 

Thanks for the advice GMR and Rich, new rad arrived today, headed out for an extra long weekend in the morning will get it in next week.

Re: What did you do to your truck today?
 

so it is a GMC, love the GMC's, very hard to come by, are you running stock shocks on the rear as well, any travel issues on the shocks?

Re: What did you do to your truck today?
 

its a '65 chevy. just love the gmc grille. stock shocks all around. no issues, but then again i dont haul anything

Re: What did you do to your truck today?
 

thanks, this fall when I tear down my front end I think I will do what you have done, not sure what to do with the back end, will wait and see how I feel about the rake after the front end is done. I think I like the rear stance, but suspect that the springs are sagging, fresh stock height springs may raise it up... So I don't think 4" drop springs will drop it 4" back there.

Re: What did you do to your truck today?
 

removed the tint on my back window,put on by PO! It looks like I'm going to have to make it my DD as the trans is out of my Dodge

Re: What did you do to your truck today?
 

I was thinking about doing that too! What length did you get?
Posted via Mobile Device

Re: What did you do to your truck today?
 

Finished tearing apart by bed and removing the angle strips.

http://i311.photobucket.com/albums/k...a/DSC00249.jpg

http://i311.photobucket.com/albums/k...a/DSC00248.jpg

Re: What did you do to your truck today?
 

Picked up the 350 that I've gotta get buttoned up and ready to go...

Re: What did you do to your truck today?
 

these are 70".

Re: What did you do to your truck today?
 

I towed my truck to my shop 60 miles from my house with my Ford Ranger.. It must have looked funny. Monday I will paint the firewall and figure out how I am going to bring it back.
I also installed the Tailgate I for for FREEEEEEEE on to my 66.

Re: What did you do to your truck today?
 

i havent driven it since i put em on. my dad says they can pull forward and catch wind at high speeds. i guess that would explain any noises.

i also have the 700 r 4 so i'll be finding out about that noise soon enough.

the portawalls seem to have a small buckle on 2 of my wheels and i cant seem to get it out. any one know any tricks?

Re: What did you do to your truck today?
 

my pop has an old manual tire machine. i broke down the tire on one side and the portawall slips around it behind the bead. after that you fill it with a little air and slowly work the portawall back into the seat. keep adding air a lil at a time to make sure you dont have some pushing out. i used a rubber mallet but it was black. after the first whack i put an old gym sock over it. (it makes black streaks). i'm still not 100 %. on 2 of the wheels i have a very small buckle in the white wall. i think it has something to do with the balance weights being in the front. i'm gonna pull em and re balance with the weights on the inside only.

Re: What did you do to your truck today?
 

i need to do this to my truck but ive been putting it off. this is something id like to learn about in detail. the guy i bought my truck from filled the drip rail with bondo. i hate to see whats under there.

Re: What did you do to your truck today?
 

Replaced my gas pedal trim and my kid came over and swapped out my rear springs.

Re: What did you do to your truck today?
 

Last couple of days....

Replaced value cover gaskets and underhood clean up
Checked all the fluids
Took a ton of "extra " wire out from under the dash from the PO
Rewired the trailer plug and controller
Rewired the stereo so it actually works

Re: What did you do to your truck today?
 

Did i mention i can't wait to tow the 65 SB with the dually?..
the 1965 Chassis goes to the body shop to put the cab on this week and I amso looking forward to towing with power and more brakes.....

Re: What did you do to your truck today?
 

test fit the blasted and painted pulleys and brackets with the new, polished stainless button heads. They look fantastic.

I have to charge the battery and move the truck out of the way so I can finish taking everything apart and pull the engine... But, it started pouring down so that'll be next weekend.

Steven

Re: What did you do to your truck today?
 

Turned over the engine (283) and fired it up for the 1st time....Was a bit worried since a friend overhauled it and I bought it as a package deal with a rebuilt 700R4 sitting in my storage building covered up for 6 years. 2 weeks prior I shot a squirt of motor oil in each cylinder to avoid snapping a ring. I removed the HEI dist and primed the oil pump for about 5 minutes while turning the harmonic balancer. Like my avator signature says...this truck has been a long going project with countless hrs and $$$ which I tackled this truck build my self. I have actually had dreams of driving my truck for the 1st time and worried my self to death on the out come of the trucks powerplant.... The moment of truth has come...She started right up and it sounded so beautiful!!!!!!! My wife and kids were so excited. I finally realized and told my wife why was I worried all this time on the engine for nothing???(((IT'S A CHEVY!!!!)))

Re: What did you do to your truck today?
 

Congrats on the fire up, happy for you, they sure do take time don't they, way longer than we think it will, gettin there though. Looks very clean.

Re: What did you do to your truck today?
 

Took the truck out for its maiden voyage after doing the brake swap.