The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   projects and builds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=197)
-   -   Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO! (https://67-72chevytrucks.com/vboard/showthread.php?t=585901)

Indian113 11-06-2021 09:15 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
That looks like a nice homestead for Craig and Family! It won't take you guy's long to make it ship shape. Oh Yeah Nice SHOES!!!!

Grizz1963 11-07-2021 04:40 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Quote:

Originally Posted by Indian113 (Post 8992566)
That looks like a nice homestead for Craig and Family! It won't take you guy's long to make it ship shape. Oh Yeah Nice SHOES!!!!

The shoes were nice ehhh ;)

Thanks Ray.

So much work ahead for them.

And yes, it is a nice place.



So Saturday promised to be a full day.

Woken early morning by Tara, our AirB&B hostess’ chickens and the neighbours ducks, along with a visit from little black Bear the catflap sized dog….. we go going and then headed back to Craigs place.

They came inside our space, looking for food.

So Sally shared a slice of bread with them, which they loved.

https://hosting.photobucket.com/imag.../IMG_9982.HEIC

Then off to Craigs.

A quick walk around to inspect the work we had done the day before.

https://hosting.photobucket.com/imag.../IMG_9988.HEIC

Looking top to bottom.

https://hosting.photobucket.com/imag.../IMG_9989.HEIC

Quck coffee, a status check and day plan, followed by me straight out to start cutting back on the very overgrown garden shrubs, loads left to do.

The house is also covered in a variety of creepers and and different plants, all fighting for,space.

https://hosting.photobucket.com/imag...70e07c0b53.jpg

Loads of cutting, chopping and packing into ton bags.

Many of them.

https://hosting.photobucket.com/imag...e399ce300c.jpg

We took 6 tightly packed ton bags and a few loads of tree branches and removed shrubs to the neighbours bonfire pile, pulling and packing everything on top on]f the pile.

Remember the person gate created yesterday?

From the other side, after removing the gazebo and about 70 boxes, all individually marked, inventoried and recorded.

Moved into the double tandem garage space for storage till the stables are moved and Craig figures the most sensible garage construction to lay down on site.

https://hosting.photobucket.com/imag.../IMG_0004.HEIC

Yes, it is at an angle, weird for an OCD guy like Craig, but it is planned that way.

Continuing on the lift, carry, move, pack theme, we unpacked a shed and greenhouse after the gazebo was emptied.

Sally and Lorraine continued while Craig and I sat in the shade and drank a ton of low alcohol beers…….

Strong as a Shire horse and as eager.

https://hosting.photobucket.com/imag.../IMG_9998.HEIC

Loads of stuff carried inside.

https://hosting.photobucket.com/imag.../IMG_9999.HEIC

Such a fake pic.

https://hosting.photobucket.com/imag.../IMG_0002.HEIC

Sally is a pretty good recorder of progress, taking pics when we were not expecting it.

While we kept rearranging the interior she got some pics too.

https://hosting.photobucket.com/imag...a0bf0442bc.jpg

After emptying out the gazebo and sheds we broke for some food, and Craig with his chest still beating him up, took 30 minutes to catch is breath, sorting his mailbox..

I also tried but the paparazzi was there.

https://hosting.photobucket.com/imag...30232e69aa.jpg

During our break, Craig and Lorraine sorted the sign writing on the mailbox……

Remember it cn only be straight.

https://hosting.photobucket.com/imag...42c0286d74.jpg

Of course I had to edit it slightly.

https://hosting.photobucket.com/imag...Render(56).jpg

When we took the bags and branches out to. The bonfire field, they neighbours wife was tending their donkeys.

Gentle, tame animals.

I loved the attention too.

https://hosting.photobucket.com/imag...d442f07396.jpg

https://hosting.photobucket.com/imag.../IMG_9994.HEIC

https://hosting.photobucket.com/imag.../IMG_9995.HEIC

Then back to more of the same.

Just so much overgrown plants.

https://hosting.photobucket.com/imag...241a79e9f1.jpg

Dinner was due after a shower and catching of our breaths.

Always more to do.


.

Grizz1963 11-08-2021 07:03 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Saturday night after finishing late again we went out to a pub for dinner.

Excellent all round.

https://hosting.photobucket.com/imag.../IMG_0034.HEIC

Mixed grill was my choice and a sticky toffee pudding for desert.

Perfect.

https://hosting.photobucket.com/imag.../IMG_0039.HEIC

Back at the guest house by 9.00 and bed before10.00

We were shattered from three days of nonstop work.

Sunday morning alarm clock was Dinky.

Looking for breakfast.

https://hosting.photobucket.com/imag.../IMG_0067.HEIC

Out the AirB&B before 08.00 and back to Craigs for breakfast of toast and coffee.

I also wrote off my garden shoes and planted them in the tree.

Only to get a text from Craig later to say his daughter found them and objected to them.

https://hosting.photobucket.com/imag.../IMG_0068.HEIC

Craig had wanted to show me the loft all weekend.

I kept declining.

On Sunday I went up.

What a bonus space.

Most will be converted to playing and relaxation space for his 9 year old daughter.

https://hosting.photobucket.com/imag.../IMG_0071.HEIC

https://hosting.photobucket.com/imag.../IMG_0073.HEIC

Oh and later more creepers removed from the walls.

This stuff will s beautiful but destructive.

https://hosting.photobucket.com/imag...241a79e9f1.jpg

We left by 10.00 in order to get home at a sensible time.

Stopped for a toilet and coffee break

Price of fuel is steep per liter.

https://hosting.photobucket.com/imag.../IMG_0085.HEIC



Headed back up on Friday after work to belp get the stable block down on the ground.

I may be off the Rezin Rockit build for a bit.

Grizz1963 11-08-2021 03:14 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
No progress at all on the Rezin Rockit since last week.

Been busy helping a friend, and day job is currently very demanding and in fact quite stressful; or even hateful.


Need to still source 8” rear brake shoes and a pair of new Slave cylinders.

jmarkha1 11-08-2021 03:26 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Good to have a break from everything (especially work)...

Grizz1963 11-08-2021 04:43 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Quote:

Originally Posted by jmarkha1 (Post 8993376)
Good to have a break from everything (especially work)...

Work for sure, of course the pressure is relentless.


Interesting change of pace this morning.

5’C outside.

When I came down around 07.00 George was sitting outside the door.

Let him in, gave him a cuddle and some catnip.

Carried on with my morning rituals.

Later I found him curled up on my bed upstairs.

First time,for,everything I guess.

https://hosting.photobucket.com/imag.../IMG_0108.HEIC

He is welcome, and I guess it was warmer inside.

Grizz1963 11-09-2021 05:22 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
While clearing some old rubbish, Craig found this hatchet or is it an axe?

https://hosting.photobucket.com/imag.../IMG_0119.HEIC

He gave it to me because he knows I love to polish turds.

At home I had a piece of an old pick axe handle that has been waiting for a job for possibly 3-4 years, crazy but true.

So while trying to wriggle the old handle, which has borer beetle holes in it as well, so obviously unsafe, out…. It snapped at the head without any effort.

https://hosting.photobucket.com/imag.../IMG_0121.HEIC

So I marked the new handle and went to the woodwork shed, not been in a while, and got my small bandsaw out, only to find the clade had jumped the track, so reinstalled that, then skimmed the head to a point where I could shape it on the bench grinder, yes….. that is very wrong, but faster than the belt sander or linisher.

Eventually got it to a very tight, hammered in fit, followed by some flapwheel action.

Then realised the rear end was way too thick for easy use when chopping kindling etc.

So back to the grinder, more shaping, followed by flapwheel smoothing.

https://hosting.photobucket.com/imag.../IMG_0128.HEIC

Still not satisfied, I decided to add Craigs username and date of birth, just to add more random detail.

https://hosting.photobucket.com/imag.../IMG_0132.HEIC

So I will take this back to him over the weekend to use at his fireplace or the Raeburn stove in the kitchen.

Beats throwing it away.

Grizz1963 11-09-2021 04:21 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
So in the spirit of randomness…..

I popped in at Sallys Unclebob the hoarder today to go look at a car I have an eye on.

No idea why really, just a whim.

While I was there, Bob who knows everything Sally does asked how the weekend went.

I told him, showed a few pics and mentioned some things that need building sooner than later.

Like a firewood and solid fuel store alongside the house and the play area in the loft for his daughter Elli.

So from old Cars we went out into the yard to a pile of wood and he said to select any of it that I thought Craig may need.

So I will go back before the weekend and select all the hardwood and pack it in the car.

https://hosting.photobucket.com/imag.../IMG_0148.HEIC

Window sills and door thresholds.

https://hosting.photobucket.com/imag.../IMG_0150.HEIC

Also in the deal were some “offcuts” of 6” by 1” thick planks, treated good quality.

https://hosting.photobucket.com/imag.../IMG_0152.HEIC

Remember the loft conversion and Sally halfway up there?

Craig wants to build a permanent staircase up there from her bedroom with a door to close in when needed.

And guess what……..??


Uncle Bob had a 101 inch rescued wooden stair.


Now I just need to get it in or on the car…… and up to Craigs place.

https://hosting.photobucket.com/imag.../IMG_0154.HEIC



In other news, Fil “Sparkplug” contacted me today to ask if we could use another set of hands as he did not want to miss out on the fun.

At 150 miles from Cambridge in the Yellow Submarine camper, he will be sleeping on Craigs driveway on Friday and straight out into the horse yard.

Thanks Fil.

Grizz1963 11-09-2021 04:40 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
A friend, Bob in America commented below:


Rian, that looks like a wonderful old folded axe head, probably forged in a small shop more than a century ago. With my eyesight it may well be a Chinese knock-off from Bunnings circa 2002. Either way it's a beautiful save of a classic tool. I am so glad you are easily distracted because it makes me feel better. I can often be found working on something that isn't on any list with even the lowest priority. They just make me smile.

Well Bob, I took a closer up pic for you.

Grinding marks very much evident.

BUT……

Looks like you were right.



https://hosting.photobucket.com/imag.../IMG_0158.HEIC

Grizz1963 11-10-2021 02:21 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
And again a surprise skip find.

Used, still works, but the neighbour building has used it as needed, and not keeping it.

Thank you, free money.

Offered it to mate Craig but he already has one.

https://hosting.photobucket.com/imag...Render(57).jpg

Madness.

Grizz1963 11-10-2021 04:32 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
I took the drum, slave and shoes @nickwheeler removed and left neatly, to the local factors today and left them there for them to find the replacement parts for me.

Lets hope they can source the bits.


In the mean time my serial vintage bike restorer neighbour called me over this afternoon to collect the diesel/paraffin heater for the carport.

Usually @pauly arrives on site in winter when the temperature hits 6’C but this winter he may only need one set of thermals…..

https://hosting.photobucket.com/imag.../IMG_0171.HEIC

The whole heater felt like its tank was filled, reasonably heavy.

But further inspection shoed it was empty.

So I added some diesel and started it.

STINKY Thing.

https://hosting.photobucket.com/imag.../IMG_0176.HEIC


But it is hot, should make the carport comfortable to work in once I hang the large blue canvas on the front.

Roll on progress.

Grizz1963 11-11-2021 04:02 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Went to Uncle Bob after work.

Loaded some wood stairs, 101 inches or 2565mm for Craig to fit in his daughters bedroom up into the Loft.

Covered in Barn Owl poop.

https://hosting.photobucket.com/imag.../IMG_0207.HEIC

More wood for random jobs.

Free is good.

https://hosting.photobucket.com/imag.../IMG_0210.HEIC

Busy weekend ahead, and looking forward to working with mate Fil and Craigs son Kyle over the weekend to get as much progress as possible.

Later.

Grizz1963 11-11-2021 04:45 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
This weekend is the yearly charity toy run that we have visited a few times before at Tuba Trucks in Fayetteville in Arkansas.

Run by Clem and Kim Johnson the entry ticket to the whole day including food, live music and friendship is a kids toy.

Dennis used this as a deadline for taking his 1966 Nascar C10 there along with partner of more than 25 years, Deb, she makes an amazing breakfast too,

So last night the truck was loaded.

https://hosting.photobucket.com/imag...x/IMG_0225.JPG

This morning.

https://hosting.photobucket.com/imag...x/IMG_0206.JPG

On the road…..

https://hosting.photobucket.com/imag...7afd6ee34a.jpg

Dennis relaxing.

https://hosting.photobucket.com/imag...00cbe1657c.jpg

And eventually Arkansas

https://hosting.photobucket.com/imag...e35fce175d.jpg

And then Clems place.

https://hosting.photobucket.com/imag...c1213a9476.jpg

https://hosting.photobucket.com/imag...12f1efed47.jpg


https://hosting.photobucket.com/imag...ef11fed3bb.jpg



And there you have it.

@pauly dreams of this truck.

We all want 800plus bhp in a 2015 NASCAR racing truck camouflaged as a 1966 C10

Or don’t we.


Next year…….. ROAD TRIP.

For sure.

Grizz1963 11-12-2021 05:50 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Saw this on FB this morning.

Yes please.

https://hosting.photobucket.com/imag...Render(58).jpg

https://hosting.photobucket.com/imag...x/IMG_5191.PNG

Should be a bag of laughs.

Grizz1963 11-13-2021 05:32 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
So I forgot to post the interior of Dennis’ truck.

https://hosting.photobucket.com/imag...x/IMG_5189.PNG

Friday I headed up to Shropshire again to meet up with mate Fil “Sparkplug” at Craigs in order to help him bring down the stable block and move and stash it.

Unfortunately I struggled with the trip.

It took me 5 hour 45 minutes to do the posted 204 miles on a Friday afternoon.

Included was getting “lost” twice thanks to Fords useless Satnav that is both slow and not very clear, plus showing maps upside down etc.

The roads were stop start, and at times the engine was off and handbrake up…..

Not ideal.

https://hosting.photobucket.com/imag.../IMG_0249.HEIC

So I stopped at Craigs just after 7.00pm, had dinner, then Fil got there from his 150 mile trip from Cambridge and we sat talking till after 10.00pm before heading out.

Fil to his camper, and I came to the AirB&B we used last weekend as well.

Greeted by nobody that time of the night.

However, this morning both cats were in for a love and a cuddle as their mother was away on funeral duties.

https://hosting.photobucket.com/imag.../IMG_0259.HEIC

After a mug of tea and a shower, I headed over to,Craigs.

Fil’s van in pole position on the drive.

https://hosting.photobucket.com/imag.../IMG_0262.HEIC

Walked around and found them already busy.

https://hosting.photobucket.com/imag.../IMG_0263.HEIC

So we unpacked my car and started on the stables…..

At about 11.00 we were called in for breakfast by Lorraine.

https://hosting.photobucket.com/imag.../IMG_0268.HEIC

Then headed straight back out again……

A hectic, hard and productive day saw us get about 70% of the job done.

I am happy to do a more complete report if anyone is interested.

More to do tomorrow till 12.00 then it is back on the road.

Knackered tonight.

Pills x4.

Grizz1963 11-14-2021 02:37 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Friday morning while I was having my before work starts mug of tea and toast, George the cat came in.

Had his Catnip on the “cat tree” scratch post.

Then walked into the lounge and jumped on my lap for a cuddle, and off again to inspect the lounge as before.

Then this……

https://hosting.photobucket.com/imag.../IMG_0231.HEIC

And this.

https://hosting.photobucket.com/imag.../IMG_0232.HEIC

Followed by this till I got up to go up to my office.

https://hosting.photobucket.com/imag.../IMG_0233.HEIC


Nice of him to pop in.

Grizz1963 11-14-2021 03:26 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Before Fil and I got there, Craig and Son Kyle had done a load of preparation already.

Removing a corrugated roof, and a felt roof off the wooden roof structure.

Dismantled all the doors, cages and removed most of the wood panels inside of the structure.

These were already move and dry stored up on his land.

So he and Kyle both are skinny size, unlike me and to some extent Fil who are full size humans and they went up on the roof to start dismantling the roof panels.

It was wet and slippery when we started.

https://hosting.photobucket.com/imag.../IMG_0281.HEIC

Crowbar cobras, there was so much nails, screws etc there.

https://hosting.photobucket.com/imag.../IMG_0277.HEIC

Larry the farmer and digger/tractor driver had brought a trailer to help move the panels across the field to the next resting place.

https://hosting.photobucket.com/imag.../IMG_0279.HEIC

One way to move a bloody heavy trailer…….

https://hosting.photobucket.com/imag.../IMG_0278.HEIC

First panel down.

https://hosting.photobucket.com/imag.../IMG_0282.HEIC

https://hosting.photobucket.com/imag.../IMG_0284.HEIC

Once the first one was off, it got slightly easier as one had a hole in which to shove crowbars and reciprocal saws etc.

https://hosting.photobucket.com/imag.../IMG_0289.HEIC

Not as much fun as it seems.

https://hosting.photobucket.com/imag.../IMG_0290.HEIC

https://hosting.photobucket.com/imag.../IMG_0292.HEIC

Looking from the other side.

https://hosting.photobucket.com/imag.../IMG_0294.HEIC

And deceptive…..l


https://hosting.photobucket.com/imag.../IMG_0295.HEIC

A wasp nest, one of many.

https://hosting.photobucket.com/imag.../IMG_0300.HEIC

At this point we were called in for lunch, around 2.00pm

https://hosting.photobucket.com/imag.../IMG_0302.HEIC

https://hosting.photobucket.com/imag.../IMG_0304.HEIC

Fil the machine.

https://hosting.photobucket.com/imag.../IMG_0305.HEIC

Roofing all off.

https://hosting.photobucket.com/imag.../IMG_0306.HEIC

Next up was the walls.

Large

Heavy

Awkward

Dangerous.

https://hosting.photobucket.com/imag.../IMG_0311.HEIC

Eventually Larry got home from his day job, potato farmer.

And drove the tractor to drag the trailer up to the top paddock.

https://hosting.photobucket.com/imag.../IMG_0312.HEIC

We laid sheets and then moved Lil the Chevy back onto some boards.

https://hosting.photobucket.com/imag...cc7ea84d88.jpg

First load unpacked on top of sleepers/ties.

https://hosting.photobucket.com/imag.../IMG_0313.HEIC

After unloading we headed back in failing light and carried on with loading a second load of walls and panels, using phone torches etc.

And unloaded trailer no2 with Larry's help in the dark.

Calling it a day by 5.30 when the dark had completely taken over.

I was hurting like hell by then and found some pills in the car, taking a load.

Craigs wife, Lorraine had made us a South African Malay curry and rice and a traditional South African food called Vetkoek which is basically bread dough (or you can use diy pizza dough) fried in hot oil.
Then you slice it open, and load with the curried mince, or apricot jam/jelly and butter.
Absolutely mind blowing, if you know what it is.
I had not had any in 25 years or more.

Fil and I left by 7.45pm for his camper and my guest house respectively.

It had been a long, hard day.

I stayed awake till 11.00pm as I knew if I went to bed too early my aches would wake me by 4.00am.

It did, and I got up by 5.10am and made myself some tea.


Sunday was still ahead of us all to deal with the rest of the stables.

Grizz1963 11-15-2021 05:45 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Sunday morning I was awake by 05.10 and first mug of tea by 5.30

Got to Craigs by 6.30 and took a walk around the bomb site, smiling.

This was my view on site.

https://hosting.photobucket.com/imag.../IMG_0329.HEIC

Then texted Craig to open the back door.

Into the kitchen which is absolutely the family centre of this home.

Saw the hatchet has a home too, by the Raeburn stove.

https://hosting.photobucket.com/imag.../IMG_0330.HEIC

Outside the bird feeder was fully engaged by blue tits and other birds as well as this greedy guy.

https://hosting.photobucket.com/imag.../IMG_0336.HEIC

An edited version of Fil looking through the one window was texted through.

Made me smile.

https://hosting.photobucket.com/imag...ab82193cac.jpg

This was the result of Saturdays work.

https://hosting.photobucket.com/imag.../IMG_0342.HEIC

Carried on dismantling and loading the trailer.

https://hosting.photobucket.com/imag.../IMG_0347.HEIC

Lorraine made us bacon and sandwiches as well.

Very good.

Then straight back to work as we were against the clock.

https://hosting.photobucket.com/imag.../IMG_0345.HEIC

Anticlimax when the last wall was packed.

https://hosting.photobucket.com/imag.../IMG_0352.HEIC

At this point Fil formally handed his personal crowbar that was a firm favourite both days over to Craig.

There is a lot more to this photo than meets the eye.

Fil is generous to a fault and this was an example of kindness, tinged with humour.

Formal hand over

https://hosting.photobucket.com/imag...x/IMG_5202.JPG

Then the bricks were,removed, packed on a small bike trailer and pallet to be moved.

Craig will be reusing as much of the materials as possible, as this is a costly process.

Any donations of bricks welcomed.


https://hosting.photobucket.com/imag...B2226446E6.JPG

We also moved all the smaller pieces, leaving the trailer for Larry the farmer to pull up when he got back.

https://hosting.photobucket.com/imag.../IMG_0354.HEIC

Also in the paddock was Donna the pet horse who had been keeping us company over the two days.

https://hosting.photobucket.com/imag.../IMG_0359.HEIC

All wrapped up.

I got my stuff together, as did Fil and we were both on the road by 12.00 on the dot.

https://hosting.photobucket.com/imag.../IMG_0363.HEIC

Fils Camper held this gem too.

https://hosting.photobucket.com/imag.../IMG_0367.HEIC

A long hard weekend and again proof that together we are unstoppable.

Friendship goes a long way.

jmarkha1 11-15-2021 06:33 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
great results - many hands...

this team effort reminds me of how I used to tackle big jobs on cars or homes - I would ask about 5 mates to help - a hard days work with lots of bacon sarnies and banter followed by a boys night in with beers. Then the other 4 would pull in their token when they needed help with a project.

Grizz1963 11-15-2021 09:01 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Quote:

Originally Posted by jmarkha1 (Post 8995987)
great results - many hands...

this team effort reminds me of how I used to tackle big jobs on cars or homes - I would ask about 5 mates to help - a hard days work with lots of bacon sarnies and banter followed by a boys night in with beers. Then the other 4 would pull in their token when they needed help with a project.

Spot on.

That is the culture I come from.

Interestingly, as Fil observed in his usual dry manner on Saturday when two members off the UKGSER BMW bike forum offered help for a next time…..

“Funny how they come like blisters, After all the hard graft is done”

The four of us were fortunate that Fil and I are taller, and Craig and Kyle a bit shorter, but also, we were all on the same page, and the flow of work and progress was constant, if tough.

Saturday night we were all shattered, but after dinner we all just left…… to go take stock of our possible aches and pains.

I have many times helped and never seen that person again, but I have also been helped and never seen that person again. Never having expectations to me is a big part of this.



Next job, once Larry has dug the footings for the concrete slab(s) (there is another shed to be built that is in kit form already) will be to get the walls up again.

I will reach out on behalf of Craig when that happens as this global forum family certainly does look out for each other.

I think if he can get the walls and gables up, followed by the roof sections and set in place, the finishing details will be within his solo ability.

Often the extra hands are just needed to hold things in place while they get fixed.

Grizz1963 11-16-2021 04:31 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
What a day, what a weekend, well, two weekends.

But I took 30 minutes over lunchtime to run to the local village Hoo St Werburgh to collect and pay for parts.

Sourced by these guys.

https://hosting.photobucket.com/imag.../IMG_0591.HEIC

New Slave cylinders.

https://hosting.photobucket.com/imag.../IMG_0595.HEIC

And rear brake shoes.

https://hosting.photobucket.com/imag.../IMG_0596.HEIC

Total cost £39.66

@nickwheeler I think it means one can proceed.

Some parts you just get on with it when you need them.

Weekend I suspect will be the time.

Grizz1963 11-18-2021 04:07 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Becoming a habit it seems.

George walking up the garden path by 07.00 meant company.

First time he has come to sit on the armrest when I am doing my early morning day job stuff.

He also does sit on my lap a bit……..

Life is certainly good for me, having company.

https://hosting.photobucket.com/imag.../IMG_0602.HEIC

This week has been very busy from,a,work point of view, full days of online training, testing and planning.

So yesterday was my first chance to go for my daily walk, and it was pretty good. Somewhat fresh if not chilly, not cold.

By 3.00pm the warmth leaves and the sun is heding home.

https://hosting.photobucket.com/imag.../IMG_0618.HEIC

Look carefully at this pile of hay bales.

Zoom into the left top of the pic, and get a perception of the sheer size and height when you see the fences and gate on the ground.

This new farmer has so much scaled up his operation, which of course if destroying the roads because of the sheer size of the machines and tools running up and down here.

And it seems the local council and he do not give a toss, or care for anything except profit.

It really does anger me.

https://hosting.photobucket.com/imag.../IMG_0619.HEIC

Now a home, but the St Mary Hoo Parish Church has been here a long time.

Quoted off the internet.

Of the three churches in Hoo – St. Mary’s, St. Werburgh’s and Allhallows – it is not completely clear which came first. However, St. Mary’s is the best contender as there is record of one Wifward de Hou passing part of the tithes of the parish here to the Priory of Rochester when he became a monk. This was around 1068 and strongly implies a church was already well established here.

By the time of the Domesday Book in 1086 Hoo St. Werburgh seems to have existed and was prevailant over Hoo St. Mary already. This is probably because the site of Hoo St. Werburgh was more suitable for habitation and that village grew as St. Mary Hoo shrank to a few houses.

Nevertheless, the church at St. Mary Hoo was rebuilt between about 1280 and 1350 as a fairly typical Kentish ragstone church with a castellated tower. All of this was heavily rebuilt around 1881.

Today the church is, unusually, a private residence and no longer has any ecclesiastical relevance. It is an odd feeling being the graveyard, which is still open to the public, but being aware that you are also standing in someone’s garden.



https://hosting.photobucket.com/imag...414e496599.jpg


Hopefully I will be able to get back to the Rezin Rockit by the weekend inbetween giving Sally some deserved time.

Friday tomorrow.

Grizz1963 11-19-2021 06:01 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Partial lunar eclipse this morning early.


Sunrise was just a continuous spectacle.


https://hosting.photobucket.com/imag.../IMG_0673.HEIC


https://hosting.photobucket.com/imag.../IMG_0684.HEIC



Weekend soon.


@nickwheeler saving my butt on Sunday around midday with the Rezin Rockit rear brakes if anyone wants to come cheer us on.


Fridays are mostly good unless a deadline is included.

Grizz1963 11-20-2021 07:07 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
[quote author="@admin" source="/post/2705389/thread" timestamp="1636484578"]Thanks for the extra info @grizz it was tricky to get enough info on all the builds in the time between announcement and when we recorded. Actually partly why I made this thread as I'm hoping to spend a bit of time filling in the gaps.

S10 is definitely much smaller than I thought then![/quote]

My S10 is about 100mm or 3-4” narrower than my 2020 Ford Focus estate.

Thought I would post a few pics of the 3rd door in here for those interested, or not and for @rmad and @admin to broaden their S10 knowlege 😉

The door is almost invisible, unless you know that the shut line on the rear of the cab actually for the door.

https://hosting.photobucket.com/imag...EEACE2CBA7.jpg

So once the small door is opened, a skinny lad life Hotwire and others could get in there and sit on the sideways mounted seat for a 5-10 mile trip to a pub, show etc.

Full size …. Chunky (fat buggers) like me would fit in there mainly if hijacked or prodded with an AK47 in the back, or a Glock in the neck for an indefinite distance ride.

https://hosting.photobucket.com/imag.../IMG_0754.HEIC

The 3rd door also locks in place to form the B-pillar for the drivers door.

So it cannot latch unless you close it.

https://hosting.photobucket.com/imag.../IMG_0756.HEIC


These are on a long wheelbase chassis, and actually have a different length to the LWB trucks.

The bed is a really useful 6 foot bed as well.

Turning circle on these are extremely poop, and having mounted slightly wider than standard tyres, I have a bit of chassis rub on full lock.

Other than that, these trucks have extremely comfortable seating and ergonomics are on par with luxury cars of the era.

Aircon, speed-o-cruise control, automatic gearbox with an overdrive gear in my ZQ8 factory special which included a bunch of nice touches like upgrades on steering and factory lowering has made this truck a real keeper, unless someone needs to have it more than me.

Grizz1963 11-20-2021 04:01 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
My mate Kevin continues to move along with his build.

Wiring currently challenges him.

https://hosting.photobucket.com/imag.../IMG_0708.HEIC

The S10 on the other hand is an absolute pleasure.

https://hosting.photobucket.com/imag.../IMG_0705.HEIC

Life does go on.

And it’s good.

Grizz1963 11-21-2021 03:08 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Does it really matter?

Tasteless will always be that.

However, tongue-in-cheek? Well, that may be different.


Saw a used set of these in this new thread by @etypephil and it made me chuckle.

https://forum.retro-rides.org/thread...arlin-roadster


So I ordered a set.



https://hosting.photobucket.com/imag...x/IMG_5258.PNG


I also fitted another strip light in the carport, now it’s like daylight in there.


https://hosting.photobucket.com/imag.../IMG_0780.HEIC

Followed by swearing repeatedly at my new Dewalt cordless drill that for some reason will not retain a 4mm bit.

It keeps releasing the bit.

Surely not right, is it, or is it.

While I was down there, I modified a rolling stand that I had made years ago to carry the space heater.

https://hosting.photobucket.com/imag.../IMG_0790.HEIC


And lastly, added another permanently live, Motion activated light that will make finding key holes easier in the dark.

@craigrk gave it to me last weekend, and this is the right job for it.

Quite a lot of light.

https://hosting.photobucket.com/imag.../IMG_0796.HEIC

@nickwheeler will be over this afternoon to help with the safe changing of the rear brake shoes and cylinders.

Plan is to try get the curtain side up before that too, as cold weather has been forecast.

More later.

Grizz1963 11-22-2021 03:19 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Chilly day yesterday, possibly the first one this year.

Weather has been so mild to date, so dropping to @pauly territory meant I had three T-shirts and one of my garage hoodies on to protect my chest and prevent couching and spluttering.

https://hosting.photobucket.com/imag.../IMG_0854.HEIC

So when I built the carport, I knew that at some point I may want to add a curtain to cut the breeze and even hold in some “HEAT”

First job was drilling pilot holes, and then adding these coach screws, a 3/4 box of which cost me about £2.00 at a bootfair last year.

New impact driver working nicely, the drill being a pain in the butt releasing the drill bit constantly.

https://hosting.photobucket.com/imag...x/IMG_0863.JPG

Once the canvas was measured as the holes are individually spaced, screws were in, it was time to hook and hang the truck curtain side to see how it fits before @nickwheeler came around midday to help me do the rear brakes on the Rezin Rockit.

Of course it is way too big, so I guess a bit of folding and tucking will be in order.

https://hosting.photobucket.com/imag...6B58002BEE.jpg

Looking over from the neighbours yard, it is obvious that there is a 4 foot gap from the left side.

This can be fixed……. Or not.

Due to folding under and raound some beam ends it is a bit slack.


https://hosting.photobucket.com/imag.../IMG_0877.HEIC

I think it will work well along with the space heater later in winter and for now it is folded, packed and put away.

Small steps.

I also raked up,a load of leaves, cut the grass and pulled some dead bits from the side beds.

Grizz1963 11-22-2021 04:13 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Completely non retro, but may be of random interest.

Seen in London this afternoon.

License plate search shows.


LJ70FMF
KAR-GO DELIVERY-BOT


Colour
Green

Fuel type
Electric

Date registered
1 November 2020


https://hosting.photobucket.com/imag...x/IMG_5293.JPG

https://hosting.photobucket.com/imag...x/IMG_5292.JPG

Grizz1963 11-23-2021 05:59 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Sorry, report is a touch late.

Work is a bit busy right now.

So @nickwheeler came over on Sunday, the first day temperatures had dropped enough to make me wear three garage T-shirts, a hoody and a warm beanie hat.

https://hosting.photobucket.com/imag.../IMG_0854.HEIC

Earlier the day I had fitted my super large truck canvas as a test run to the carport.

Then removed it again. But it will go up when the cold pushes me harder.

It certainly makes for a less breezy work area, along with the new lights I fitted, it should be a cold but workable space once the diesel heater is on.

https://hosting.photobucket.com/imag.../IMG_0877.HEIC

Nick and I had a coffee and a chat first, then went down to the carport and got going.

He did all the work, I watched, tried to learn, and made coffee and inappropriate comments.

That seemed to work. Hope it did for him too.

I would have been totally screwed without his skill and knowledge on site.

Cleaning cleaning and more wire brush action, ensuring the reused parts were smooth and slick.

Some copper slip grease on a few moving points.

https://hosting.photobucket.com/imag.../IMG_0892.HEIC

New slave cylinder going on.

https://hosting.photobucket.com/imag.../IMG_0885.HEIC

Old ones were really bad, mud dribbling from them when pipes were disconnected.

By the second one, we just cut the pipe, after all, new brake pipes are easy and cheap to fit, and ambetter idea as everything is now new.

https://hosting.photobucket.com/imag.../IMG_0891.HEIC

One side done, springs were really fighting us.

https://hosting.photobucket.com/imag.../IMG_0890.HEIC

And after a few hours, job done.

https://hosting.photobucket.com/imag.../IMG_0895.HEIC

Carport rearranged a bit, moving the rear axle deeper in, out the weather.

Also discussed and looked at the MX5 engine, mounts etc.

Plus my initial thoughts on lowering the Rezin Rockit, which may not happen, due to the amount of invasive work it would take, including cutting up the body and trans tunnel.

Still, nothing is yet cast in stone.

Massive thanks again to Nick for popping over and all the brain power and work shared.

Much appreciated.

Grizz1963 11-23-2021 03:48 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Quote:

Originally Posted by Robbi (Post 6175115)
Love the claws hanging on to the arm rest ��

Up to now I thought they were just for show.


Having a cat by proxy, if that is the way to say it, means that I take no responsibility for his misbehaving.

Do i ?

So when he comes and presents like this, sleeping on my bed all morning………

Cute ehhhh??

https://hosting.photobucket.com/imag.../IMG_0951.HEIC

He leaves again by midday.

Not to be seen till tomorrow morning first thing, when he is sitting on a chair out on the deck, staring in through the French doors till I let him in.

But this afternoon I was just taking a break from my desk, looking out the bedroom window, into the neighbours back yard and I saw him sitting down the bottom, next thing he flew straight up and tried to catch a passing blue tit or something similar.
Then his attention turned back to the rose bed next to which he was sitting…… rising up and pouncing, flipping what appeared to be a mouse up into the air.
It seemed to be partially maimed, I opened the window and called out to him, asking what he was up to.
He turned and looked at me, then grabbed the mouse and came trundling up the concrete garden path and across the lawn, through the hedge and up my drive, pausing halfway up to drop and play with what appeared to be a damaged mouse, then carried on and carried it up and left it under the truck before coming to the back door to be let in.
Cuddle, catnip and then he was out again to go play the mouse to full destruction.


https://hosting.photobucket.com/imag.../IMG_0961.HEIC


Bloody cats…….

Killers.

Grizz1963 11-25-2021 01:26 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
For those still interested in how this build is progressing……

Craig sent these this morning.

The two foundation holes for the concrete pads and brick raised edges have gone down.


I think the biggest problem is going to be to find some helpful people when the walls have to be raised and held in place, the first corner is a minimum of a 5 man job as the panels are a 4 man lift and carry from where they are waiting.

The roof gables and panels will be a many handed affair as well.

Of course finding help…… THAT is the problem.

CLICK PIC FOR VIDEO.


https://hosting.photobucket.com/imag...6c8b25a26c.mp4


Membrane down in the Stables (now it will become a workshop and office) and first bit of type 1 to keep it in place.

https://hosting.photobucket.com/imag...4472da75cf.jpg

Trust me, it is a large piece of real estate.

https://hosting.photobucket.com/imag...03f52ba421.jpg

And then the second concrete pad will go down here.

Next to the house, and be known as the shed.

https://hosting.photobucket.com/imag...7d61ad767d.jpg

This used to be Craigs “Bike Garage” where he lived before.

Currently stacked along the side of the house, awaiting assembly.

Pity his son is in Ireland at University.

Hopefully it will come together.

Grizz1963 11-26-2021 06:26 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Here is a pic I lifted off FB.


Remember it in future when we start talking paint designs etc.

@nickwheeler seems to be quite convincing when it comes to making big jobs look a lot smaller than I see them.

All about perspective ehhhh.

It started out because I am still hoping to find another RX8 passenger seat to either add to the one I have, or even trade for the adjustable drivers seat I have but do not want.

So Nick reckons (correctly) painting the Rezin Rockit is quick and cheap, due to it being such a simple vehicle.


I like this design, the red one at the bottom.

https://hosting.photobucket.com/imag...x/IMG_5318.JPG

Can it be altered and something created in that style to suit the completed car?

Grizz1963 11-27-2021 01:16 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Weather is not pleasant as well.

Just cooked a beed mince curry with chunks of carrots and cut baby potatoes, topped with a bottled curry sauce.

Ate it too, was nice.

Weather kept me indoors and not where I wanted to be.

Sally was here and is busy with some crafting, so I helped her with preparing the materials.

Printing and cutting the templates for her.

I also deep cleaned my range cooker and then put all the parts in the dishwasher that I rarely use, to clean them, and also all the glass we had picked up on the beach down at the Thames river.

https://hosting.photobucket.com/imag.../IMG_1132.HEIC

Sorting colours and types out.

https://hosting.photobucket.com/imag...DC3A8F1F52.jpg

And finally, ready for the dishwasher……

https://hosting.photobucket.com/imag...Render(60).jpg


Once she gets the right backing pieces to add the glass and pottery to, I will report back.

Maybe tomorrow will be a warmer day so that I can get down to the garage.

Grizz1963 11-28-2021 08:44 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
For those interested in the continued activities at mate Craigs place in Shropshire where the horse stables are being converted into office and woodwork shop, plus motorbike storage and shop before adding a garage and workshop for his old cars…….

Progress continues.

Ready.


https://hosting.photobucket.com/imag...f45467657d.jpg


Also where the shed next to the house is going.

https://hosting.photobucket.com/imag...8671c0372f.jpg

Next job will be measuring and shoring up for the concrete slab.

He also needs to find a supply of cheap or free used railway sleepers.


We all have our own crosses to bear.

In mate Craigs case, it is an attention to,detail, possibly borne out from growing up in a family where his mother and father owned a rather large, successful VW garage and engineering shop, started as a home industry in the time of aircooled VW’s where the local dealership would send complex, impossible jobs to to be done.

His mum was the machinist, and both parents had day jobs on night shift at GM at the same time.

So getting it right is part of his DNA.

I used to buy parts from his dad for my various Beetles and Bay window bus.

Anyway…….

Buying a barn conversion home, that used to be stables will always bring it’s own challenges.

This week it must have exploded his head.

While redecorating his sons bedroom, the carpet came up, shirting boards came away……

There is more to what meets the eye.

But, this took the proverbial totally.

Pink toilet paper used to fill the gap, topped by some builders caulk and painted over.


https://hosting.photobucket.com/imag...450075ef34.jpg


https://hosting.photobucket.com/imag...f1a14e028f.jpg

You really are never to old to learn a new trick or two.

Or are you?

Grizz1963 11-28-2021 11:10 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Weather has been a bit chilly, windy and wet.

I had planned on doing something, anything, down at the garage yesterday and today.

Nope, rubbish weather, so yesterday,I cleaned the cooker and helped Sally with some of her crafting stuff, posted elsewhere.

This morning I had the osteopath at 09.00 and some shopping after that.

Then came home, cleaned the fireplace and started a fire.

Deciding indoors was a much nicer place than outside……..

https://hosting.photobucket.com/imag.../IMG_1148.HEIC

So much more sensible, and nicer.

https://hosting.photobucket.com/imag.../IMG_1155.HEIC

Yes, it would have been nicer doing what @nickwheeler had suggested, slipping some bits together.

Tomorrow I may regret it, but man it is chilly outside today.

Grizz1963 11-28-2021 04:56 PM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Ultimately, I spent the whole day indoors.

At about 2.30,just as I was about to go to the garage a colleague contacted me for some help.

A 39 question online test she had to write, I had done mine on Wednesday and managed to bimble my way through it to get 86% for it.

Pass mark 80%

So I wa delayed.

Then, just as I had changed into my garage clothes mate Craig called on Whatsapp and shared some more bodgery from his new house.

This time it was the sewerage system.

Enough said.

Once we had finished our chat, it was starting to show failing light.

So I decided to just stay indoors and keep an eye on Sally with her glue gun.

https://hosting.photobucket.com/imag.../IMG_1169.HEIC

One piece at a time.

https://hosting.photobucket.com/imag.../IMG_1175.HEIC

And finally….. a very chuffed Sally.

https://hosting.photobucket.com/imag.../IMG_1176.HEIC


She was really shocked at just how well it turned out.

No car stuff, but a chilly, yet good weekend.

Work tomorrow.

Grizz1963 12-02-2021 04:50 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
An MOT question for the English readers on here.


Amazingly, I have now owned this truck for a year, or 1000 miles of use.

MOT is due the end of the month and tax yesterday.

I am hoping it will pass the MOT……



EXCEPT FOR ONE THING.




Airbag light in the dash.

The steering was replaced with a non airbag sports unit before I got the truck and the light covered by a bit of tape.

Now to me, that makes sense and I do not have a problem with that.

However…….

What is the general consensus and also who has tested cars like that before ?

Thanks.

jmarkha1 12-02-2021 04:56 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
I think it depends on the tester TBH.
I would put tape back over the lamp.
Im sure there are plenty that will say - "if it was fitted with an airbag - it needs one and will fail"
Grizz - get your 66 rolling and you wont need to worry about such things :-)

Grizz1963 12-03-2021 05:01 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Class, you just cannot buy it.

But you can fake it, RIGHT?

RIGHT…….

CLASSY VALVE COVERS FOR THE REZIN ROCKIT CAME YESTERDAY.


https://hosting.photobucket.com/imag.../IMG_1313.HEIC

https://hosting.photobucket.com/imag.../IMG_1314.HEIC


Going to add so much class and value to this build.

Can’t wait to fit them once I figure what tyres to fit to the steel wheels I have waiting.

Almost weekend.

Cold forecast again.

Grizz1963 12-03-2021 05:53 AM

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 
Progress at Craigs place in Sandford near Whitchurch in Shropshire

Casting the two large slabs, yes there is a second one too, being cast today for a rather large shed.

So a concrete pump at £380.00 set up and £80.00 per added hour and a few more costs, its not cheap.

Concrete is being made up on site by an amazing machine.

10 cubic meters.


https://hosting.photobucket.com/imag...a230b64e2f.jpg

Mixing on site.

https://hosting.photobucket.com/imag...59b36d96c8.jpg

Pumping

https://hosting.photobucket.com/imag...348068066d.jpg

All the way up to the top.

Over the second sheds steel reinforcing.

https://hosting.photobucket.com/imag...c59d3a5e3b.jpg


Looking forward to seeing this completed.

Still looking for cheap sleepers nearby.

Concrete or wood.


All times are GMT -4. The time now is 12:05 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com