Re: What did you do to your truck today?
2 Attachment(s)
Still cleaning up the rear frame & suspension. Getting ready to pull off the bed but I couldn't resist removing the stock coils and setting in the 5" drop coils just to check the look before tear down. I'm likin' it.
|
Re: What did you do to your truck today?
2 Attachment(s)
Picked up a hood to build a cowl hood from, 20 bucks off CL....
|
Re: What did you do to your truck today?
buffed and buffed in a 96 degree garage. Even the oxidation is oxidized. Looking better, though.
|
Re: What did you do to your truck today?
1 Attachment(s)
Wasnt today,but painted my dash yesaterday,cluster cleaned,needles painted,bezel painted,waiting for my new lens.
|
Re: What did you do to your truck today?
After another 8 hour day crawling around on the concrete, the engine compartment prep is finally complete. If all goes well final finish will go on first thing tomorrow.
http://img841.imageshack.us/img841/1852/98320434.jpg http://img43.imageshack.us/img43/2859/30021163.jpg |
Re: What did you do to your truck today?
Had a leaking rear wheel cylinder so I replaced both on the rear and bled them, its good to have stopping power again
|
Re: What did you do to your truck today?
1 Attachment(s)
Rich 5150 69 Re: What did you do to your truck today?
-------------------------------------------------------------------------------- Picked up a hood to build a cowl hood from, 20 bucks off CL.... 06-30-2011 06:54 PM Dude 20.00 for a hood like that i would take 10 of them....nice buy... Well all i did today was make my mind up on a few things and put a fender on it to see what it would look like this low... |
Re: What did you do to your truck today?
Quote:
|
Re: What did you do to your truck today?
watch out the very new pennies are not copper anymore and I don't think they will work anymore
Quote:
|
Re: What did you do to your truck today?
2 Attachment(s)
Worked on the new bed wood from Classic Parts today. Whiteoak for the short step. Very pleased with quality! 1st pic is after the Minwax pretreat and conditioner. 2nd is after staining w/Early American Minwax. Spar Poly next and it'll be finished!
|
Re: What did you do to your truck today?
Quote:
|
Re: What did you do to your truck today?
after 2 bad 4l60e's Ive scrapped that plan and started putting the 3spd back in. new flywheel + bolts, clutch package, rear main seal. wanted to use the newer starter with old bellhousing. had to do some grinding but all fits well now :)
|
Re: What did you do to your truck today?
I removed the Window Regulators and Vent Windows from my doner truck. Hope to get them installed soon.
|
Re: What did you do to your truck today?
1 Attachment(s)
1 coat of spar poly. Several sanding and coats to go! Mark, I know your wishin our shop looked as neat and organized as mine! :haha:
|
Re: What did you do to your truck today?
Quote:
http://img7.imageshack.us/img7/2659/paintbooth02.jpg http://img14.imageshack.us/img14/1351/paintbooth01.jpg For this project there really wasn’t much overspray because I decided to paint the engine compartment with Raptor bed liner. I wanted something textured and durable that wouldn’t chip when I piled wrenches on the inner fenders, would look different but hot rod appropriate, and would require very little maintenance. For a long time I considered painting the engine compartment in Zolatone which was popular back in the 60’s, but it isn’t rust proof or nearly as durable. As of a month ago I was going to shoot it in gloss black enamel, until I saw a couple of other projects covered in the stuff, and found some favorable reviews. I’ve also had great results with other UPOL products. After about 40 hours of prep, I finally shot it this morning and by this afternoon had everything back together with the engine running. All that’s left now is to tie up the driver side wiring, repaint the hinges and springs, and get the hood back on. http://img14.imageshack.us/img14/2884/000ov.jpg |
Re: What did you do to your truck today?
That looks great Mark
LOL Zolatone would've looked cool though T |
Re: What did you do to your truck today?
I like it!!!!! Looks great Mark.
|
Re: What did you do to your truck today?
re you repainting it the same color???? I like how it looks under the hood , kinda nice ..
|
Re: What did you do to your truck today?
I put a new guage cluster from Dolphin in and replaced the 15 year old 5" round outside mirrors with the larger rectangle ones from Classic Parts. My old eyes are not what they used to be.
|
Re: What did you do to your truck today?
Quote:
http://img825.imageshack.us/img825/7076/26141573.jpg |
Re: What did you do to your truck today?
Quote:
|
Re: What did you do to your truck today?
UPOL Raptor Bed Liner. A lot of people buy it from TP Tools. I was in a hurry so I bought mine locally and paid more for it. Make sure you get the kit complete with the gun. The threads are unique to UPOL bottles. I have a 3M Schutz gun but it won't screw onto the UPOL containers.
http://www.tptools.com/Product.aspx?display_id=2600 Amazon.com: Raptor Truck Bed Liner Kit Black:... |
Re: What did you do to your truck today?
Quote:
|
Re: What did you do to your truck today?
1 Attachment(s)
wow markeb that looks great.
last night coming home one of my fwd running lights didnt work. thought one of the 1157 bulbs went tits up. ended up being a bad ground so i made 2 ground straps and grounded the parklight housings to the hood. crappy pic but you get the idea.. |
Re: What did you do to your truck today?
drove to work.
|
All times are GMT -4. The time now is 09:37 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com