The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   What did you do to your truck today? Chapter II (https://67-72chevytrucks.com/vboard/showthread.php?t=612422)

MikeB69C10 03-11-2016 11:30 PM

Re: What did you do to your truck today? Chapter II
 
I got rid of this...

http://i30.photobucket.com/albums/c3...l/IMG_6936.jpg

firedemon 03-12-2016 07:31 PM

Re: What did you do to your truck today? Chapter II
 
2 Attachment(s)
picked up one of these today now to find someone to go through it

Possmguts 03-13-2016 02:43 PM

Re: What did you do to your truck today? Chapter II
 
2 Attachment(s)
Got this a few steps closer to being done...

Andy4639 03-13-2016 03:58 PM

Re: What did you do to your truck today? Chapter II
 
Quote:

Originally Posted by Possmguts (Post 7520914)
Got this a few steps closer to being done...

What did you end up doing to get the hood to close. Good job!:chevy::metal:

flashed 03-13-2016 05:29 PM

Re: What did you do to your truck today? Chapter II
 
Wow,that looks great .

Possmguts 03-13-2016 06:37 PM

Re: What did you do to your truck today? Chapter II
 
Quote:

Originally Posted by Andy4639 (Post 7521022)
What did you end up doing to get the hood to close. Good job!:chevy::metal:

:smoke: I took the radiator back out... dont need that anyway :haha:

Ill get to that part later on... Probably get a different radiator and if I have to I'll move the fill to give the clearance needed

CK67 03-13-2016 06:54 PM

Re: What did you do to your truck today? Chapter II
 
2 Attachment(s)
getting started

71CHEVYSHORTBED402 03-13-2016 10:56 PM

Re: What did you do to your truck today? Chapter II
 
FINALLY got my hood off the truck, let the fun began. This frees up a lot of parts . Spent a weekend building the bench. The platforms front and back have a gripping rubber sheet on top (recycled rubber and not expensive). I really like using this stuff. It makes for nice padding, and holds things in place. I just used the existing nuts in the hood and some hardware to four-point underneath. I really need the room. There's lots of storage underneath, and will easily push it into the driveway and onto a trailer. Over-kill, pretty much all 3" screws and 350 lb. casters.

The bow tie :chevy: is the original off my truck. Until today it hasn't been cleaned or seen water in decades. The image doesn't do its justice. I couldn't make out any flaws in the chrome, though my eyes aren't great. It's good enough for my build, and I'm kinda picky.

https://scontent-sjc2-1.xx.fbcdn.net...eb&oe=5794C644

https://scontent-sjc2-1.xx.fbcdn.net...85&oe=5793BCC7

1971c10La 03-13-2016 11:38 PM

Re: What did you do to your truck today? Chapter II
 
4 Attachment(s)
Didn't do to much but got few little things done and it's always fun working on the truck :D painted head light bezels and washer fluid bracket tryed shining up the grille but it have todo here's few pics because I know everybody loves pics lol

1quik70 03-14-2016 11:12 AM

Re: What did you do to your truck today? Chapter II
 
I spent the entire day yesterday in the barn working on my 71 SWB 4x4. Got lost of the wiring finished, Just the fuel pump left to do today. Also worked on getting mounts/risers built for the ProCar Low back buckets.

This deal has been a 3 year process for a bad transmission.... But I'm almost to the finish line!!

73737373 03-14-2016 11:14 AM

Re: What did you do to your truck today? Chapter II
 
Quote:

Originally Posted by Already Gone (Post 7513536)
I just love the details. Did you just wash under the hood or respray it?

I used Westley's Bleche White and an old brush from a carwash; ya know where the foamy soap comes out and you have to manually brush? I did not take it to the carwash. I used to own a carwash and I kept the brush when I sold it. That brush is one of the best brushes I have; soft enough where it doesn't scratch the paint, but enough stiffness where if you need a little "oomph", it'll cut thru it.

73737373 03-14-2016 11:23 AM

Re: What did you do to your truck today? Chapter II
 
2 Attachment(s)
Tried to clean up firewall, but hard to reach some places and hated to mess w/the grease pencil markings. Wetsanded roof w/2000 grit. Had nice weather here in OK on Sat and Sunday, but had to work on the yard....ugh!!!
Helper lurking in upper right corner. Too bad she can't push a lawn mower!!!

roushinator 03-14-2016 12:57 PM

Re: What did you do to your truck today? Chapter II
 
That hood is awesome!

AKC 03-14-2016 01:22 PM

Re: What did you do to your truck today? Chapter II
 
Well, actually it was yesterday, but I got my frozen wipers working again. Just have to get some new blades and I can drive in the rain again.

Whenever it rains here... :rolleyes:

73737373 03-14-2016 01:34 PM

Re: What did you do to your truck today? Chapter II
 
Quote:

Originally Posted by 1quik70 (Post 7521960)
I spent the entire day yesterday in the barn working on my 71 SWB 4x4. Got lost of the wiring finished, Just the fuel pump left to do today. Also worked on getting mounts/risers built for the ProCar Low back buckets.

This deal has been a 3 year process for a bad transmission.... But I'm almost to the finish line!!

Wish someone would show me the finish line! I don't think such a thing exists!!

AKC 03-14-2016 01:56 PM

Re: What did you do to your truck today? Chapter II
 
Quote:

Originally Posted by 73737373 (Post 7522158)
Wish someone would show me the finish line! I don't think such a thing exists!!

http://graphics8.nytimes.com/images/...ticleLarge.jpg

;)

chevnkevin 03-14-2016 07:42 PM

Re: What did you do to your truck today? Chapter II
 
1 Attachment(s)
I finally got the console all painted up and ready to go in
I put it in my blazer but it'll fit in the trucks too
I'm happy with how it looks and works

9teen69 03-14-2016 10:10 PM

Re: What did you do to your truck today? Chapter II
 
That console looks sick! Love the bowtie emblem. What's it out of?

allchevy58 03-14-2016 10:54 PM

Re: What did you do to your truck today? Chapter II
 
Quote:

Originally Posted by chevnkevin (Post 7522552)
I finally got the console all painted up and ready to go in
I put it in my blazer but it'll fit in the trucks too
I'm happy with how it looks and works

Like that console too. Looks good.

71CHEVYSHORTBED402 03-14-2016 10:58 PM

Re: What did you do to your truck today? Chapter II
 
Removed the inner grille from the outer. Don't know if there's an easier way, but unless you're willing to risk breaking the inner, seems the only way is to use a small cutting wheel and cutter piers on the plastic anchors. I was going to hang the inner on the wall, but realized that's asking for a break as well, so "we" sacrificed some Xmas storage for that and more. Really could use more storage around here, but I'll make it work.

Say, anyone know if there's a part number on the outer grille, other than a sticker that's no longer legible?

Possmguts 03-14-2016 11:03 PM

Re: What did you do to your truck today? Chapter II
 
Quote:

Originally Posted by 71CHEVYSHORTBED402 (Post 7522829)
fds

What did he say??

71CHEVYSHORTBED402 03-14-2016 11:19 PM

Re: What did you do to your truck today? Chapter II
 
Quote:

Originally Posted by Possmguts (Post 7522843)
What did he say??

Ha, sorry. The web was acting up, so I typed fds in etc.....Accident.

72.4me 03-15-2016 12:56 AM

Re: What did you do to your truck today? Chapter II
 
Installed my push-on weatherstrip excellent fit...:metal: Thank you GMCPauls

FIREBALL 03-15-2016 08:37 PM

Re: What did you do to your truck today? Chapter II
 
Quote:

Originally Posted by Possmguts (Post 7520914)
Got this a few steps closer to being done...

I like the looks of that hood, u did a awesome job

midniteblues 03-15-2016 09:19 PM

Re: What did you do to your truck today? Chapter II
 
possumgut is doing a awesome job too the whole truck the hood is just the iceing on the cake. keep up the good work dude.

oh that console is incredible nice work.


front clip off and disconnected engine in the k20.


All times are GMT -4. The time now is 08:18 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com