Re: What did you do to your truck today!
 

closed off fire wall.going to have vintage air...also shorten:metal: up the vents..they will have a 6 1/2 speaker and the wirering harness going out thru it..

Re: What did you do to your truck today!
 

I just got the pricing back, the wheels are a 16in rim.. they priced out a $194 US. dollars. on the web.
Going to look locally if I can get them.

Re: What did you do to your truck today!
 

Took apart the spare doors yesterday and going to have the vent windows chromed. I am getting a delivery from LMC todau and will start insulating cab.

Re: What did you do to your truck today!
 

made a filler panel for firewall on driver side to match passenger side..hand formed the old fashined way...a small torch , hammer and a round bar ..heated and hammered radius on panel...also cut vent cowl shorter..no need will have vintage air...im going to put a 61/2 speaker in there and a rubber grommet for the wireing harness

Re: What did you do to your truck today!
 

Nice work
Posted via Mobile Device

Re: What did you do to your truck today!
 

Got my tires remounted on the rallyes and got them on the truck. Much better!

Re: What did you do to your truck today!
 

http://i1183.photobucket.com/albums/...9/9bca59b1.jpg
Started custom kick panels for my truck ... Will post pics later
Posted via Mobile Device

Re: What did you do to your truck today!
 

pulled my tank out to clean it and found this:waah:

Re: What did you do to your truck today!
 

Patch work?

Re: What did you do to your truck today!
 

then i found a nice tank with all the 3/8th fuel line to replace the 6cyl lines and the patched gas tank. all the sending units harnesses for the tach dash vent visors n clips, great fan shroud on cl an came back with all this 4 $60:metal: heres a pic of my very dirty seat and one of the high hump i made up for the shifter,and finally the dash i'll be taking out the 5" autometer just looks soooo outa place time to go

Re: What did you do to your truck today!
 

dang forgot the dirty seat

Re: What did you do to your truck today!
 

http://i1183.photobucket.com/albums/...9/eb5399cf.jpg
Coming together
Posted via Mobile Device

Re: What did you do to your truck today!
 

74, that blue looks killer!

Re: What did you do to your truck today!
 

Nice job on the kick panels
Posted via Mobile Device

Re: What did you do to your truck today!
 

Thanks
http://i1183.photobucket.com/albums/...9/85c6cebf.jpg
Posted via Mobile Device

Re: What did you do to your truck today!
 

Installed the 94 amp alt from an 86 silverado. Internally regulated, 3 wire set up. Fixed the amp gauge too.
[IMG]http://67-72chevytrucks.com/gallery/...dium/00311.JPG[/IMG]

Re: What did you do to your truck today!
 

The rallies look good Newt!! :metal:
Posted via Mobile Device

Re: What did you do to your truck today!
 

I installed the sound deadening insulation and started restoring the heater equiptment. I had several heaters and vent boxes to choose from so I could take the best parts of many. I sandblasted parts and applied rustmort over night. Paint it all tomorrow.

Re: What did you do to your truck today!
 

I have been upgrading my timing chain and sprockets. Its been a real pita. I've had the most problem out of the harmonic balancer installation tool than any of it. But we are almost done. Just fixing to check on the timing.

Re: What did you do to your truck today!
 

Thanks bro!

Re: What did you do to your truck today!
 

ffk,, nice tin work, bet that took some time,
I gotta do mine, thanks the inspiration

Re: What did you do to your truck today!
 

Tinkered on the new C10 for a while today. Replaced the LOOOONG van-style oil filler tube with a oil cap / grommet, checked plugs / gaps, tested compression on all cylinders, and installed a squarebore carb to q-jet intake adapter (previous owner had installed edelbrock directly to the original intake). The old 350 still isn't running right, but it looks like the timing is WAY off. I think the previous owner dropped the distributor in without setting TDC on 1. It'll run, but the #1 wire has to be clear over past the normal #8 position, and the vacuum advance doesn't appear to be working well either. Probably going to hold off on any more troubleshooting until the new HEI shows up. Hopefully the new install will clear up all these little issues...

I also crawled underneath to check out the saddle tank setup. The tanks look great from underneath, but who knows what the inside looks like. The switch and saddle tank fuel lines are disconnected but all there if I decide to hook it back up. For now I might pull the new-ish tank out of my donor cab tomorrow and see how clean it is.

Re: What did you do to your truck today!
 

Spent a great day hanging out with forum members JohnOro and V-Dog.

Oh, and we swapped out the water pump on my truck. ;)

Thank you for the help and conversation. It was much appreciated!

Re: What did you do to your truck today!
 

Bought it and brought it home. after installing a new master cylinder and bleeding breaks. 1967