Re: What did you do to your truck today?
today is the first time the truck ran under its own power. Just to the end of the driveway and back in the garage before it started raining
|
Re: What did you do to your truck today?
Quote:
|
Re: What did you do to your truck today?
Congrats...
Isn't that an exciting time, to know that you putting your truck together and now you can actually move it! Wait until you have it all bolted together and you start driving it among all the traffic. I did my first trial run about a month ago. I'm going to the shop to pick it up today and drive it home. FUN! :metal: |
Re: What did you do to your truck today?
3 Attachment(s)
While it rained like all get out this morning, I was able to get the doors hung with teh help of my nephew who is visiting from Hot Springs. Starting to look like a real truck. Now that the doors are on, the colors look even better.
The colors are factory Olympic White and Canyon Blue. Of all the two tone colors for 1960 this seems to be the most rare, I wonder why? |
Re: What did you do to your truck today?
Actually it's not what I did to the truck , but what I was tinkering on to go into the truck .. Last winter a customer gave me a 350 chevy engine with all the accesories on the front.. He had no prior knowledge of the engine as to if it was any good ... So I pulled the pan and intake to check it out .. the intake was a TBI so I swapped it out for an old junk torker II that had the center holes cut through.. boy was it full of crud under the intake ... so I scaped and vacuumed that out ... noticed that the intake valves had build up on them so I chipped it off and vacuumed that out ..figured I would pull the oilpan off and check for loose rod bearings ,they all were tight .. so I buttoned it up and put a new filter on it and some used oil,an HEI and a 650 AFB and it fired right up ran smooth and no knocks .. so I am going to drop it in the 63 and see if I can get my AC to work ... This summer has been brutal as far as heat
|
Re: What did you do to your truck today?
Installed left side interior door panel, handles, armrest
http://kieth.smugmug.com/Trucks/66-G...270788_RRWkpdq finished Bedwood, and fenders and lights: http://kieth.smugmug.com/Trucks/66-G...273324_VFxsvXX Next week front fenders, wiring, exhaust, then A/C , then front end alignment: :gmc2: |
Re: What did you do to your truck today?
Hi Keith do you have a pic of your dash and instruments, can't see it very well from the side shot. Thanx ...Vernski:gmc2:
|
Re: What did you do to your truck today?
4 Attachment(s)
Okay this isn't actually today....but my long box finally found some paint...still have the outside of the cab to paint yet ...
|
Re: What did you do to your truck today?
That looks fantastic!
|
Re: What did you do to your truck today?
Tore apart the passenger side door and got the lock and door handles working right. Also got the window rolling up and down properly and lubricated the hell out of everything. I need to get some more interior door panel screws. It only had 4 left in it...
Posted via Mobile Device |
Re: What did you do to your truck today?
Quote:
http://kieth.smugmug.com/Trucks/66-G...258658_X8WmmMg :gmc2: |
Re: What did you do to your truck today?
Quote:
|
Re: What did you do to your truck today?
Quote:
Yes I did, sent it to Vacuum Chrome Plating in Wisconson, cost about $120.00 then we painted the face crinkle black cause it was just too much chrome (yes it is possible) and the face had a few flaws in the plastic so the black was a easy way to build up the surface so the flaws do not show. Kieth:gmc2: |
Re: What did you do to your truck today?
Must be a great feeling ;)
[quote=Capt280;4805393]today is the first time the truck ran under its own power. Just to the end of the driveway and back in the garage before it started raining Looks great !!!! Quote:
Quote:
|
Re: What did you do to your truck today?
1 Attachment(s)
Quote:
|
Re: What did you do to your truck today?
Quote:
I would buy it from you if it was for sale, that's how much I like it. My GMC is a beater parts truck for now and like you, my money tree isn't producing any fruit. :waah: |
Re: What did you do to your truck today?
Quote:
Looks very nice, stole my idea for the black dash face didn't you ? Just kidding, I think every thing we are doing has been done before..... Kieth :gmc2: I got my fuel tank finalized today, moved the filler neck, brazed up the old filler neck, getting ready to paint it. will post pictures when finished... painted the gmc grille, letters, secret color combo, worked on the fenders some more..................................busy busy.......:gmc2: |
Re: What did you do to your truck today?
I bought new shocks, front and rear. Going to paint the frame before installing them though.
Oiled both window regulators. Both windows roll up with ease now. Adjusted driver's door striker plate...much better now too. Also, UPS delivered new wiring harnesses from these guys - https://www.classicpartsusa.com - Engine harness - Parking light harness - Firewall to back lights - Tail light/backup light harness They look fantastic...can't wait to install them. |
Re: What did you do to your truck today?
Quote:
|
Re: What did you do to your truck today?
1 Attachment(s)
Quote:
Not speedometer, not temp gauge not even the lights. Haven't had a chance to dig into the causes at this point but I have been actively searching for gauges that will work both stock and aftermarket. The dash is clean but I have concentrated on frame, suspension etc. first. I will get there.. it all takes time and a good harvest from the $ tree. :lol: |
Re: What did you do to your truck today?
Quote:
|
Re: What did you do to your truck today?
I have a 63 Chevy short box that I was/may still convert to a GMC because the dash is butchered bad. :waah:
It will take me a week of patchwork to fix all of the little mods that the PO made all over this cab not to mention the dash. :ito: I think the problem was that the PO may have suffered from cranial rectal inversion disease... not sure. ;) Give a kid a sawzall and watch out I guess... :uhmk: |
Re: What did you do to your truck today?
The guys in brown showed up with some packages for me today. Unfortunately it is a work day for me (grave shift with a 50 mile one way commute), so I won't be able to get a whole lot done. In the boxes are: lowered spindles, Energy Suspension a-arm bushing set, ball joints, and a set of Russel's steel braided brake lines. Now all I need is a junkyard run for a booster and master cylinder, and for my rotors to show up, and I'll be ready for my disc swap.
Posted via Mobile Device |
Re: What did you do to your truck today?
Installed the rear bed fuel door, got the tank finished, adjusted the cab and bed lines and got them a lot closer than they were, finished tying down the brake lines and transmission cooler line, installed radiator, getting ready for the heater lines and the radiator hoses. Waiting on rear bumper brackets so we can final install the fuel tank at the rear of the truck. Oh did anyone tell you guys that it is hot outside :devil:
http://kieth.smugmug.com/Trucks/66-G...270029_44JXfxh :gmc2: |
Re: What did you do to your truck today?
Quote:
The color of your truck is AWESOME by the way!! |
All times are GMT -4. The time now is 11:45 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com