Re: '64 chevy 2wd to 4wd
 

chassis is mostly there. still working on the 454
Attachment 1414432Attachment 1414433Attachment 1414434Attachment 1414435Attachment 1414436

Re: '64 chevy 2wd to 4wd
 

one of the oil filter slash transformer....
Attachment 1414439Attachment 1414437Attachment 1414438

Re: '64 chevy 2wd to 4wd
 

Interior looks great. I.wasn't going to say a thing about the cable.......honest....;):lol:. No one will notice it. They'll be too busy tripping out on all the other details.

Re: '64 chevy 2wd to 4wd
 

little more on the rollback. i have 'till wed to try finish it. i kinda gave myself a challenge to get 12 models done this yr, one a month. dont know if it will happen.
the body was a ROYAL PIA, then for some reason i could'nt do anything right (except stick my fingers together....) pass side decals went on no prob, first shot, only printed one. dr's side was an exercise in frustration- NINE times i had to print the stripe.......
visors & domelight, re-wound the winch the right way, also got a couple of big chrome spots for it
Attachment 1419529Attachment 1419531

'nother pia was the hood, multiple pieces= multiple warpages. grill valance is cut up & modified one from the s-10
Attachment 1419530

454 is done, it's not glued in, everything is just mocked up for fit- 'nother issue was the fan & rad (SURPRISE!! just like the '55.....) had to make new rad support, new engine mounts, move the trans x-member, lift the body another mil or so, modify the grill to fit new rad support..................
Attachment 1419535

Re: '64 chevy 2wd to 4wd
 

these stripes....grrrrr!
scratched up some seatbelts
Attachment 1419544

just another mock-up to check. notice white strip of styrene under rad-still having to shift things around......
Attachment 1419545

i love these things, wish i had them a long time ago. 3d printed i belive
Attachment 1419546

Re: '64 chevy 2wd to 4wd
 

It's looking pretty dang nice!

Re: '64 chevy 2wd to 4wd
 

thanks Dale!
i got the block & trans mounted, had to modify the cab floor & t-case so it would fit as well. :banghead:
got the exhaust made, still need to do d-shafts, rear will prob be a 2 piece'r. also need to do steering & heater & rad hoses.
getting this one done really makes me want to jump on truck 3 of the fleet, the peterbilt. but this rollback has been a HUGE amount of work, bet i got 'bout 60-80 hrs on it, so i'm thinking something simpler next.
'55 chev crewcab stepside 1 ton dually 4x4, but with tall skinny lugs :metal:
(or maybe one of them un-built kits first....holidays come the 3rd!)

Re: '64 chevy 2wd to 4wd
 

with all the probs with this one, didn't think it was going to come together, especially how i lost 4 hrs yesterday swappin' out the switch on the wifes truck- again......
Attachment 1420304Attachment 1420305
Attachment 1420306Attachment 1420309
Attachment 1420310

Re: '64 chevy 2wd to 4wd
 

couple more.....
Attachment 1420327Attachment 1420328
Attachment 1420329Attachment 1420335
Attachment 1420336

Re: '64 chevy 2wd to 4wd
 

the "fleet" so far.......
Attachment 1420337Attachment 1420340
Attachment 1420341Attachment 1420342

Re: '64 chevy 2wd to 4wd
 

You rocked this one, a lot of awesome details. Nice looking fleet too.....

Re: '64 chevy 2wd to 4wd
 

thanks Dale!
was not a smooth build.....way longer than i figured
i know i just did a five-five, but really getting into the crews, & i got an abundance of '55's right now (plus i just like the kit, nice frame etc...)
changing directions on this though, thinking all stock looking (4x4 on skinny luggies) but with a modern drivetrain, what most guys do on their 1:1's anyways
chopping up some styrene...
Attachment 1422206

pretty rough looking right now. to keep the bottom of the cab level & the body lines strait, there's really no way to cut it so the windows line up decently, so i will cut out the center post, shape the windows & put a new post back in.
one other prob is the cab tapers back to front.....
Attachment 1422207

....so i had to split & wedge it open.
it's going to look rough like this for a week, going camping tomorrow, beer, fishing, quadding, beer.....:metal:
so looking forward to it, we've had a heat wave (for us :lol:) for the last couple weeks with mid to hi 90's, been brutal at work. some useless
trivia, took the laser thermometer up on the roof yesterday, air temp 96, roof temp on the surface, 165 degrees, as i roll along with my torch- around 450-ish with spikes to 500. yup, on slow broil all day....:lol:
Attachment 1422208

Re: '64 chevy 2wd to 4wd
 

This looks like a cool project. I have faith in ya.....

Re: '64 chevy 2wd to 4wd
 

thanks Dale
what the hey, got all these '55's.....this will burn up a couple of 'em :lol:
been busy since we got back, not a lot done
well, i know what kind of drivetrain i'm putting in, i know it's going to be a crew, i know what colors i'm painting it.....
but i'm not sure which way i'm going to go with this......
this is tire & wheels i got kicking around, also thinking non-dually with steelies & lugs, or steelies & bigger tires, haft to order (and of course 4x4 :metal:)
1 ton dually crew....
Attachment 1425764Attachment 1425765

bigger tires....
Attachment 1425766Attachment 1425767

Re: '64 chevy 2wd to 4wd
 

little more done....
coat of primer to see the touch-ups
again, good-bye back wrap
Attachment 1426195
Attachment 1426196Attachment 1426197

Re: '64 chevy 2wd to 4wd
 

Man, that is looking good!

Re: '64 chevy 2wd to 4wd
 

thanks Dale!
still need to straiten up the drivers body line....
nuthin' glamourous, getting the basic's out of the way, stretched the frame 1 5/16", got the int tub made up, & decided on a engine.
Attachment 1427916

basic tub, needs everything yet...
Attachment 1427915

and...surprise! surprise! NO bbc this time. '92 vette LT-1....
Attachment 1427914

Re: '64 chevy 2wd to 4wd
 

It looks great to me. You did a great job on the piller between the front and back.

Re: '64 chevy 2wd to 4wd
 

them pillars ended up being four pieces- each.....:cuss: :lol:
got some more work done on the LT1. truck will be pretty much stock looking, but went:bling2: under the hood. first LT1 i've built- weird running the plug wires to the front....
Attachment 1429505 Attachment 1429506

a little more on the int.
Attachment 1429507

kinda at a standstill, thought i had a couple dana's left, only got one, so i ordered 8 or 9 of them, & only got a couple borg warner t-case's, prefer the 205 so i ordered 5 of them too, & a couple sets of some nice steelies and some other junk.
while i'm waiting i was looking at the '94 dually i picked up the other month. REALLY need to get my eye's checked.....
never noticed the meltage on it. looks like it was to close to a lamp or something- bummer
had plans for this & the 454 SS
Attachment 1429508Attachment 1429509

Re: '64 chevy 2wd to 4wd
 

i thought the two '90's chevys would be quick builds, swap the boxes around.....
like the red ext-cab, they have the lousy AMT one piece chassis....
the 454 SS with a real funky paint job...
Attachment 1429512

notice the drivers side box twisted in- very tuff to fix.....but i'm going to try cause i dont have a 88-98 single cab dually in the fleet, plus i DO have everything already for it. and i think it will look cool. just threw the body in the stripper, see what happens with it....
Attachment 1429513Attachment 1429514

and with the left overs i can make another truck i dont have in the fleet, ext-cab SB. this one i need to order tires for, thinking a set of baja claws. after i took these pic's, i heated up the cab with my lighter & was able to push the cab up so it's pretty decent, but the rear cab wall is a mess, might have to cut it out & scratch in a new one....
Attachment 1429515Attachment 1429516

Re: '64 chevy 2wd to 4wd
 

hmmm....shades of the cameo, two days in the purple pond & nuthing....:waah:
down to the store for another jug of dot 3
a tub of cabs, boxes, & interiors
Attachment 1429948

well this would explain some of it....poor 'ol SS, having had to suffer first threw a pink paint job, then being "butched" up with a screaming yella multi-stripe clown car paint job....it will finally receive a "proper" color....
the box bulkhead on the SS was also bowed, got that fixed, & was able to save the rear cab wall on the melted ext-cab, mite have to add a little styrene to the bottom of the rear window. when the dually box comes out of the stripper, i'll give it a try....
Attachment 1429949

not a lot to do on the '55 'till some parts show up. got the body sanded down pretty decently, to hard for my big digits to sand inside the cab, made a headliner instead, & avoided the fan into the rad problem this time- LT1, electric fan. was able to use the stock rad support, cut the stock rad off it, filled it, & added a 'vette elec. fan
Attachment 1429951Attachment 1429952Attachment 1429950

Re: '64 chevy 2wd to 4wd
 

Man, you've been busy while I was up at the cabin. Nice work on the multiple projects.

Re: '64 chevy 2wd to 4wd
 

sweet, lucky man getting out, we just landed a huge hotel roof that will tie us up for 4-5 weeks, which pretty much kills any time off :waah:
crappy deja vu, same thing happened last summer too....
multiple projects? dont know what happened, just minding my bizness building a little old '55, next thing i know, styrene explosion & chevy's everywhere....:lol:
yeah...jeez...
on the plus side i always got something to screw around on- even when waiting for parts. right now i for see a lot of sanding....
Attachment 1430805

what a rainbow, no primer was used so the paint has "etched" it's way into the plastic
Attachment 1430806

and i do mean rainbow, blue paint under the yella
Attachment 1430807

started messing with the dually box. front bulkhead was a disaster, melted in solid & pulled the bedside in, & melted a big chunk out of the front of the floor. again, no primer used....
Attachment 1430808

bulkhead was beyond saving, got rid of it, bedside is already starting to come back
Attachment 1430809

Re: '64 chevy 2wd to 4wd
 

made a new bulkhead for it. the inner box is square, but i think i will heat the outer fender & see if i cant pull it out another mil or two. them are the rims & tires going on it, seems low to me....:lol:
Attachment 1430810Attachment 1430812

not the best stuff to use, but it's all i got right now, and looks better than a smooth box with a hole melted in it
Attachment 1430811

and as mentioned, getting the x-cab squared up, & straitened the box bulkhead. have to make new rear & 3/4 windows, they got a little melty, but the windshield is still good. and these rims & tires are going on here. my steelies for the '55 showed up today, & i ordered 2 sets of these super cool 35" BFG Krawlers, one set will be hittin' the '55
Attachment 1430813Attachment 1430814

Re: '64 chevy 2wd to 4wd
 

You're pretty good a multi-tasking. ..lol... alot of nice work you're doing