![]() |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
when are you adding the rubber? Looks good.
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
1 Attachment(s)
nice, now get some tires on there
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Quote:
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
OH MAN!!!! That is seriously cooooolllllll!!! :cool: :cool: :cool: :cool:
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
I just wonder what your neighbors think! :lol:
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
That is funny cause one of his neighbors is worse than he is...old Camaro with T-tops...and a tarp to cover it up.
I think the worst night was when we were building up oil pressure in his fresh 476...we had smoke and fire...it was fun. -Britain |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
1 Attachment(s)
Sheesh, tires are getting thinner, and thinner all the time! :crazy:
Are those the king's new tires? Nope, those are the new Costmo Invisatread tires! :lol: |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Are you gonna be able to fit that 305 back there???
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
2 Attachment(s)
Thanks guys, and thanks for the chop. I'm diggin 'em. I need to make some "accommodations" for the tires and then I'll take it to a shop for some test fitting.
There's one little snag; I may need to run a ~3/8-1/2" spacer in the back. The reason is because Coy stopped offering the 22x9 in a 5" backspacing. They only offer it in 5.5" now (even though the website still showed the 5"). So the back tucks in a little more than I'd like and it's pretty close to the inside wall of the tub. I thought I had given up 1/2" of positive offset, but that's not the case. They just machine down the mounting pad so running a spacer will be no different than buying their 5" BS wheels (just more expensive :rolleyes: ). Even after I get tires I'll probably roll around on the 17's while I finish all the fabrication... who am I kidding :lol: It's a good thought anyway ;) And Porter, the neighbors and I have a love/hate relationship. They love when I help them with their cars and hate when I work on mine :o Not really; we're all good. But I didn't make any friends this night (Britain with the gortex respirator :lol: ) 2000 RPM for 30 min with no valve covers and a smoke filled garage :eek: |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Quote:
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
nice wheel choice, mike... did the header pics make it ok?and what you going to do for a fuel tank? slim
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Thanks man. I replied to you on the headers. Maybe it got filtered... I like them and I think those are the ticket :)
Not sure what you mean about the tank. I have a poly replacement tank in there now with a Hagan fuel door: http://i6.photobucket.com/albums/y23...g?t=1184213035 http://i6.photobucket.com/albums/y23...g?t=1184213035 |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Believe me, it was much worse in there than it looks like in those pictures...especially when it caught on fire. There are hand prints down the hall, up the stairs, and back when Mike went running through the house to get a towel.
-Britain |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
i was talking about the fuel tank sitting on the ground....
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Quote:
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
This hidden hinge thing has been a big wrench in the gears of progress for me. I've been waiting on the hinges in order to put the new lift/tailgate on, in order to do the tail-light mod, in order to finish all the welding so I can put the rear glass in...
I would have just binned the idea but I already started to "mod" the upper hinge area and didn't want to simply "repair" what I had started (might be a little bit of a pride issue there ;) ). Actually, I really would have said forget it if Captainfab didn't come through with a pair of 60-66 Burb hinges :metal: So now I have no excuse... Here's the "before pic"--those stock hinges really are an eye soar for me, though I know they look fine when they're painted... I notice them http://i6.photobucket.com/albums/y23...g?t=1186083569 60-66 Burb Hinges: http://i6.photobucket.com/albums/y23...g?t=1186083569 http://i6.photobucket.com/albums/y23...g?t=1186083569 http://i6.photobucket.com/albums/y23...g?t=1186083569 Mounted to the body. I also inverted the lower part of the hinge and cut off the unnecessary flanges: http://i6.photobucket.com/albums/y23...g?t=1186083569 Modifying the liftgate for a strong mounting point (plus a little rust repair: http://i6.photobucket.com/albums/y23...g?t=1186083569 http://i6.photobucket.com/albums/y23...g?t=1186083569 http://i6.photobucket.com/albums/y23...g?t=1186083569 |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
http://i6.photobucket.com/albums/y23...g?t=1186083569
http://i6.photobucket.com/albums/y23...g?t=1186083884 http://i6.photobucket.com/albums/y23...g?t=1186083884 My repair patch cam out a little sloppy but I can fill that in ;) Here you also see the begining of the bracket I made to mount the hinge to the liftgate: http://i6.photobucket.com/albums/y23...g?t=1186083884 Drilled and tapped for the bracket (allows for adjustment): http://i6.photobucket.com/albums/y23...g?t=1186083884 That gaping hole above the hinge where the weatherstripping sits will be filled back in like it never happened (and won't be cut on the other side ;) ) That was from attempts with different hinge styles: http://i6.photobucket.com/albums/y23...g?t=1186083884 That little slot will also be filled back in: http://i6.photobucket.com/albums/y23...g?t=1186083884 I tested the motion and it looks like it's gonna work like a champ. |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
That looks great Mike, I'm glad they worked out for you. That will definitely make for a cleaner look on the outside. I can't wait to see some more pics :)
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Just wanted to say...I think you are doing and awesome job, she looks great. and keep up the good work!!!
Alex |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
i am impressed with the way you drilled clearance for the driveshaft....
ill have to file that away in my brain.. just in case i run into something similar. |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Outstanding work as usual, I recently read in your 61 thread that you had Plans for a 68 Doghouse on the Burb.
Personally that is my Fav in the 67-72 line up , All i can say is It just's keep's on astounding me................ Rick Just found your New thread on Doghouse , Vote has been cast............ Doghouse LInk http://67-72chevytrucks.com/vboard/s...d.php?t=252384 |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Thanks all :)
Toyz: Funny that you bring this up now because I JUST posted a POLL on it ***IN THIS THREAD*** ...and now I see that you were the first to vote. Thanks! :metal: |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
I know this hinge mod started out looking like a hack job, but it will be done right and finished off nicely. My main concern is strangth so here's what I've come up with. I think it'll hold ;)
The inboard side of the hinges must be spaced down due to the arch of the roof. This keeps them level with each other to prevent binding. So I put a 3/16 mounting pad there and drilled and tapped it. On the outboard sides I put a 1/8" plate inside (above existing skin) and tapped that. http://i6.photobucket.com/albums/y23...g?t=1186342706 http://i6.photobucket.com/albums/y23...g?t=1186342706 http://i6.photobucket.com/albums/y23...g?t=1186342706 http://i6.photobucket.com/albums/y23...g?t=1186342706 http://i6.photobucket.com/albums/y23...g?t=1186342706 http://i6.photobucket.com/albums/y23...g?t=1186342706 http://i6.photobucket.com/albums/y23...g?t=1186342706 |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
this is probably the best thread i have ever subscribed to!! keep up the good work. this gives me hope for my k5 project
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Quote:
I FINALLY got the hidden hinges functional. It wasn't that it was a lot of head scratching, it was just a LOT of work! Had to drill 64 holes, yes six-four, and tap 20. There was multi layered metal to cut and drill with weird internal angles that wanted to push the bits to the side or break them... I was starting to doubt if this was really worth doing but now I'm a believer. Here's some pics of the driver's side: http://i6.photobucket.com/albums/y23...g?t=1186549852 http://i6.photobucket.com/albums/y23...g?t=1186549852 http://i6.photobucket.com/albums/y23...g?t=1186549852 http://i6.photobucket.com/albums/y23...g?t=1186549852 http://i6.photobucket.com/albums/y23...g?t=1186549852 http://i6.photobucket.com/albums/y23...g?t=1186549852 Mounted... http://i6.photobucket.com/albums/y23...g?t=1186549852 and it works :) http://i6.photobucket.com/albums/y23...g?t=1186549852 http://i6.photobucket.com/albums/y23...g?t=1186549852 |
All times are GMT -4. The time now is 06:46 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com