Re: 1954 3100 C4 Tube Chassis Build
Are you suggesting removing some of the the spring length or planing it down for thickness ?
|
Re: 1954 3100 C4 Tube Chassis Build
Get all the weight engine, front clip, cab doors and box on. measure the height, then remove approx. 1/8 from each side with a table saw, then see how much it lowers. When you get loose approx. 25-30% of the highest travel point start to test the shockwave with air pressure to see what happens. Due to the shockwave not being able full support the full weight of the truck, use the fiberglass leaf like a booster for the shock wave. By sneaking up on the narrowing of the leaf you find the optimum use with both. buy having 70% of the leaf in tack you could run if one of the bladders fails. This is my plan, it is only a theory, I'm still about 6-8 months before I can test this on my truck. Just and idea that I thought that I would share.
|
Re: 1954 3100 C4 Tube Chassis Build
Since when can't a Shockwave hold up the vehicle?
|
Re: 1954 3100 C4 Tube Chassis Build
I'm told by the manufacture that in a 57 GMC with a 454 that the weight would exceed the limits of the shockwave. So I'm investigating viable alternatives. Any suggestions?
|
Re: 1954 3100 C4 Tube Chassis Build
ccreddell, I see what youre talking about, (when you first mentioned this I thought you were talking about a Watts link for some reason) It seems cool but a crazy amount of extra work when you can just run Shockwaves instead. Definitely adds to the WOW factor though. Ill be watching to see how your project progresses. Good luck and post lots of pics.
|
Re: 1954 3100 C4 Tube Chassis Build
Quote:
|
Re: 1954 3100 C4 Tube Chassis Build
Quote:
|
Re: 1954 3100 C4 Tube Chassis Build
Going to be parting this out soon if it doesn't sell whole. Everything available for sale.
|
Re: 1954 3100 C4 Tube Chassis Build
Not happy to hear this Josh! Not happy one bit! LOL! So what are you gonna work on now?
|
Re: 1954 3100 C4 Tube Chassis Build
Pretty girl you have. I like the stance too, I wanted my front wheels tucked more away from the fenders gives it a very aggressive look imo. You chose to have yours closer to the fenders, looks exceptional with wheel/tire combo. I'll stalk this thread.:smoke:
|
Re: 1954 3100 C4 Tube Chassis Build
This truck has been sold a while ago, I am starting another one right now, Project Redemption. Its here in the build section as well.
|
Re: 1954 3100 C4 Tube Chassis Build
Wow, Skill Level: Expert
|
All times are GMT -4. The time now is 03:11 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com