Re: Daverods project 66
Quote:
|
Re: Daverods project 66
Quote:
|
Re: Daverods project 66
1 Attachment(s)
Decided to pull my sending unit before going out to the old truck to look for a new one . Look what I found. Just not sure how to fix it?:crazy: Looks to small to weld. I guess it's copper. I've never braised anything and have no idea how. Anyone? What about jb weld?
|
Re: Daverods project 66
JB weld would work, but it's getto. If not cleaned up right you could have it fall off and get stuck. How much is a new sending unit?
|
Re: Daverods project 66
I think that is pretty common.
you could probably braze it with a propane torch. |
Re: Daverods project 66
the dropmember looks good
|
Re: Daverods project 66
;)
Quote:
|
Re: Daverods project 66
Quote:
|
Re: Daverods project 66
1 Attachment(s)
I'm going to change this out and put in the 66 dash. I think I can even get a tech for it. Somthing to do when I get bored, I'm kinda bored now. :lol:
|
Re: Daverods project 66
cool man, brazing and soldering are pretty much the same idea, typically when you solder you use an iron and solder, brazing you use a torch and some type of filler rod.
|
Re: Daverods project 66
Quote:
|
Re: Daverods project 66
Quote:
|
Re: Daverods project 66
Quote:
|
Re: Daverods project 66
My green temp light comes on when I start up then it goes out after a couple minutes. Is this normal? I'm thinking that maybe it's overheating and the red bulb is burnt out. It doesn't seem hot. Went to swap bulbs did'nt even have a red bulb wrecked the green one getting it out. Guess I'm off to get some bulbs.
|
Re: Daverods project 66
Quote:
i was joking about the tank |
Re: Daverods project 66
Quote:
|
Re: Daverods project 66
Quote:
|
Re: Daverods project 66
Quote:
|
Re: Daverods project 66
2 Attachment(s)
Cleaned 50 years of crap off my A arms and cross member. Lowered the arms down and cut 1 1/2 coils off. Putting on some new pads and lines while I'm at it. Can't wait to put the wheels back on.:uhmk: Put a new bulb in my red and green warning light now nothing works.:lol: Have to mess with it some more. Habor freight jack stands $19 for 2. There going fast get some now. :lol:My truck looks like a stink bug.:lol:
|
Re: Daverods project 66
Messed with my temp lights some more. If I take the red light bulb out then the green light works. If I put the red bulb in nothing works. There all new bulbs. Maybe a short? Maybe a bad temp senser? Now I know why it did'nt have a red bulb.:lol:http://picasaweb.google.com/normanme...eat=directlink I think I need the next page.:waah:
|
Re: Daverods project 66
sounds like you have a bad ground on the lights.
|
Re: Daverods project 66
Quote:
|
Re: Daverods project 66
1 Attachment(s)
Anybody know what the thing with the wires going into it is called and where I can get a new one?:uhmk: It goes to the temp. warning lights on a 64.
|
Re: Daverods project 66
Ordinarily a temperature sending unit has only one wire. Looks like that one has 2 or 3 wires? I don't know what else it would be being it is in the coolant.
|
Re: Daverods project 66
It has 2 wires and it looks like it goes in the coolant. When I wiggle it it makes my temp warning lights (green/red) blink on and off. I think it's bad and I need a new one.:waah:
|
All times are GMT -4. The time now is 11:43 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com