Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
 

35 hours of work and 4 months of ciphering, :D. Are you going to be around tomorrow evening?

Thanks man!

Thanks Kevin. Congrats on the "lil man".

Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
 

I totally could be. IFC is doing free movies in the park ~6-7 blocks from my house, so I had plans to do that w/friends, but it's neither definite nor required.

If you're able to pop into town, feel free to stop by. As a perk, I have one of those SA-1000 harnesses that I'm looking to offload, or if you just wanted to check it out ... yep!

Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
 

Sorry we couldn't make it work out Jason, maybe next time.

R

Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
 

No worries! Either way, if you're interested in that SA-1000 wiring setup, let me know. I've opted not to use mine. If I weren't taking the time to completely rewire my truck inside and out, I'd totally use it, but ... meh.

Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
 

Do you have a link to it?

Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
 

Look at the last two pictures in this post: http://67-72chevytrucks.com/vboard/s...4&postcount=93

Here is Jared's site with the prices, etc.: http://www.currentperformance.com/Ac...iring_acc.html

It's the top kit - $94. Will sell shipped for $10 less if it will help you out?

I'll dock 10% off his price and ship it to your door for free, if this is a perk.

Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
 

Shifty, I'm not sure what I'm going to do right now. I'm leaving for NM on the 3rd, so the car stuff is going to be on hold for a while, :( .

Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
 

At least you have na excuse. I am at home right now but have so many chores that I can't touch teh truck. I have the agony of walking by it every single day though.I did have time to get the gas cap mod done and FAQ thread done, and I installed one of the push-on door seals that GMC Pauls sells (but now I can't close the door without seriously slamming it so hard the glass could break!), got firewall blockoff plates done and all wiring stripped out.

I am STILL waiting (3 months later?) for Jegs to send my speedo and tach gauges.

Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
 

Which ones are you getting? Part #?

R

Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
 

Good news! Got the body off the frame, :metal: .

Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
 

Part numbers., if anyone is interested (NOTE: some of these gauges are electric because I'm installing an LS1!!)

Autometer Ultra Light II 5" gauges:

autometer 4989 - speedo
autometer 4998 - tach

Autometer Ultra Light II 3-1/8" gauges:

autometer 4992 - voltage
autometer 4953 - oil pressure
autometer 4937 - water temp 100-250
autometer 4913 - fuel level

Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
 

Bad news, :(. After pulling the body off the frame and I found out that it's been tweaked pretty bad. I could try to get it fixed, but since the body is already off, I might as well replace it. Anyone got a good 2WD Suburban frame?

Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
 

That is minor Hart Rod, very easy repair especially with the body off already. Go have it fixed

Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
 

I'm not so sure. The frame had a 2" crack in it also right behind the front crossmember. Plus, right side frame horns where the bumper bolts on seems messed up also. I was going to try and clean this frame up without taking anything apart. If I had another frame, I could just sand blast/paint it and swap everything over.

R

Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
 

jim meyer racing advertises frames any wheelbase...expensive but nice...might be an option

Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
 

Cut it out.... Make that bad boy a Tahoe :metal:

Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
 

I do not have the skills or the patience of Frizzle Fry, :D. Plus, I want to drive it again before the end of the decade.

I'm just going to find another frame and swap everything over.

Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
 

rob, if you have troube finding a frame, let me know , i've got a friend with a71-72 suburban that he was wanting to sell cheap . it's here north of montgomery. if your interested i'll get up with him and get the details , mike

Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
 

Any help finding a good one closer would be great. Let me know.

R

Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
 

Bolted the motor and tranny in the chassis just to make some room in the shop. Everything lines up real well. Too bad, I'm going to have to pull it out again.

Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
 

looks good from here

Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
 

We all know you do ...and mine was back on the road after three weeks ;) Too bad the bend is in the wrong place or I'd say you have no excuse :lol:

Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
 

stripmasters ph number cant get anyone to answer or call back with one on website????

Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
 

Send me an email with your phone number and email and I'll forward it to him.

R

Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
 

Did you get in touch with him?

***********

I'm already missing working on the burb. I was so close to getting it done. Oh well, hopefully I can get it finished for the power tour next year. I've already found 2 projects here, :D. I gotta have something to play with.....:).