Re: My 1965 build thread
 

cp has supposed to have rectified mismatched calipers on my powerbrake conv.kit since june keep telling me they will take care of it yeh sure! nice work bud i am driving/ building 65 fleet & working on 54 . we got some of the same taste. keep up the tread. looks great!! jw

Re: My 1965 build thread
 

If I can quit chasing parts and just work I'd be happier. I was chasing more parts today. I picked up gasket kit, reverse flow water pump, fuel pump, sending units for water and oil, front wheel bearing seals and motor mounts. Tommorrow I'm going to a guy that has some extra small block parts to see what I can find.

http://i369.photobucket.com/albums/o...d/DSC08207.jpg

Remember I was once labled "Captain obvious". :lol: How did I aquire the new title?;)

At least with this Miata I'm making some $$ to support my truck habit.:metal: Thanks for the compliment.

OK here is the last pic of the gauges they are finished except for wiring.

http://i369.photobucket.com/albums/o...d/DSC08200.jpg

Here's the fuse panel

http://i369.photobucket.com/albums/o...d/DSC08202.jpg

I'm trying to decide which way to mount it.

Verticle- wires connect on the left
http://i369.photobucket.com/albums/o...d/DSC08205.jpg

Horizontial- wires connect on top
http://i369.photobucket.com/albums/o...d/DSC08204.jpg

Re: My 1965 build thread
 

hmmm....maybe you got a promotion?!?!?! :lol:




I like the horizontal, you could really tuck the wires up high, and hidden...

Re: My 1965 build thread
 

[QUOTEI like the horizontal, you could really tuck the wires up high, and hidden...[/QUOTE]

:agree:

Re: My 1965 build thread
 

I have to agree that the horizontal mount would look better.

Re: My 1965 build thread
 

There is an unspoken rule with fuse panels. They must be installed in the most inconvenient location possible. Preferably one that requires a contortionist to access. :lol:

I like the horizontal.

Re: My 1965 build thread
 

Horizontal as well. Keeps the wires up nice and tight otherwise your going to have to have a big fat wiring loom to the left of your Fuse Box.

As for the unspoken rule I agree what the heck is up with that? Of course I worked on a Honda once and it had a split fuse box half behind each door and it really confused the heck out of me.

Re: My 1965 build thread
 

I also like the horizontal but . . ..... along those 'un-spoken-rules' mentioned, I think future service might be easier if they were coming out the side & then routed 90° up to keep them out of the way. This would allow some extra slack should the need for repairs sneek up on you (not that anything you install would fail).

Re: My 1965 build thread
 

Thanks for the inputs.

Well GM came thru like they said. The ubolts came in and they actually gave me an extra. I had to go to the hardware store for lock nuts. GM doesn't offer them.

http://i369.photobucket.com/albums/o...d/DSC08217.jpg

http://i369.photobucket.com/albums/o...d/DSC08208.jpg

This a very nice and safe spring compressor that I borrowed. I think he said it is an OTC brand. It is pretty pricey he says.

http://i369.photobucket.com/albums/o...d/DSC08215.jpg

This is as far as i could get the left front upper A arm bushing screwed in while on jack stands. I hope it will go further in. I'm sure it is supposed to be like the rear one.

Please excuse the dust.:lol:

http://i369.photobucket.com/albums/o...d/DSC08213.jpg

http://i369.photobucket.com/albums/o...d/DSC08214.jpg

Left side done.

http://i369.photobucket.com/albums/o...d/DSC08216.jpg

Re: My 1965 build thread
 

I like the vertical mount. All the labels on the panel are for vertical mount, so if you were to see the panel I think mounted horizontal would look out of place.

Re: My 1965 build thread
 

That does make since, but I'd like to tuck it up higher so it's hidden. I'm so confused. ;)

Both front springs and tierods are in still need to drill for the idler arm bracket. Wheel bearings are packed and installed (not pictured).

http://i369.photobucket.com/albums/o...d/DSC08237.jpg

I used a roloc stripping wheel to clean the dust shields. It does good to clean everything but does leave minor scratch marks. It is not supposed to be used on a high speed grinder. It's not rated for high rpm's. Just throttle it down.

http://i369.photobucket.com/albums/o...d/DSC08238.jpg

Re: My 1965 build thread
 

so... does the fuse block have to be under the dash?
If you are going with all new wires and system, maybe a different more accessible spot would be better.
ideas:
on the inner fenderwell with a waterproof cover.

in, or access through the glove box.

in a floor console (if you have one).

on the outside of the firewall w/ waterproof cover.

on the outside of the driver fender right under the c/10 emblem:D ....just kidding with that one:lol:

Re: My 1965 build thread
 

You gave me an idea. What about inside the frame rail like under the driver. The brake and fuel lines run along the passenger side. Now i"ve got something else to dwell on. :lol: Thanks for the inspiration.

Re: My 1965 build thread
 

my sisters car reminded me.. she has a 2000-1? dodge neon, and the fuse box is crammed under the hood right next to the battery in a waterproof box. Took a while for an old timey car guy like me to find it there . right in plain sight btw!:lol:

framerail, it would be out of view, and a clean install, depending on how low you are , might be hard to get to to change one on the fly.

Re: My 1965 build thread
 

I don't think the framerail is a possible choice on even a mildly lowered vehicle. To much possibility for the box to become submerged or become saturated w/moisture (we all know how effective water tight seals can be @ times).

Re: My 1965 build thread
 

Water and electricity don't play well together.

For me if its not where it normally goes it would be in the engine bay on the other side of that wall or under the seat somewhere.

Either way its gotta be up high enough so water doesn't get anywhere near it. One puddle could really screw up your day.

Re: My 1965 build thread
 

Under the dash it is for the fuse panel.


http://i369.photobucket.com/albums/o...d/DSC08246.jpg

http://i369.photobucket.com/albums/o...d/DSC08243.jpg

http://i369.photobucket.com/albums/o...d/DSC08244.jpg

Here's a tag I got off of ebay that I will run on the truck

http://i369.photobucket.com/albums/o...d/DSC08242.jpg

I took the girls Christmas shopping and saw this rolling down the road today.

http://i369.photobucket.com/albums/o...d/DSC08241.jpg

Re: My 1965 build thread
 

looks awesome Alan, I have one of those 65 GA tags on my truck.... Got asked by a Marietta police officer in a parking lot for my info, he didn't know you could do that.... Yikes... I took the advice of the dmv to carry the paper work and the real plate in the truck... After I showed him everything and educated him he was, lets say a little embarrased:lol: I should try no plate like the guy in the primer step!!

Re: My 1965 build thread
 

Congrats on getting it on all 4's again. ;)

Re: My 1965 build thread
 

alan nice work,dig the two tone,solid work and clean as h-ll

Re: My 1965 build thread
 

Alan and Old School,
explain how the old tags are used.

Alan,
Very clean, Thanks for sharing the pictures.

Re: My 1965 build thread
 

progress looks great. are you running stock gas tank? Possibly if access allows. look at mount in cab corner, inside truck behind seat so you can get at it to change fuse & still very easy to get at an unused & protected space. pics on your progress & quality of workmanship are very inspirational. Hope it does lead to your own business someday. I'd recommend ya. JW

Re: My 1965 build thread
 

In GA we can take a year specific GA tag to the DMV and they will register the tag to that vehicle. For some reason they give you new tag to keep inside the vehicle. I don't understand that. I have not experienced it yet. The best thing to do is ask your DMV to see what can be done. Good Luck and thanks for the compliment.

Re: My 1965 build thread
 

Thanks man, it's an accomplishment.

Thanks, I think the color contrast turned out good.;)

Thanks for the inspirational comment. Once the holidays are over I should be getting an aluminum fuel cell to go between the rails. Locating the fuse panel behind the seat is another good idea. I think I will stay with the traditional location. I'm bound to change my mind before I actually mount it.:lol:

Re: My 1965 build thread
 

My friend and I replaced the bushings on my a-arms with the things sitting on the ground. We were each standing on the set of 3/4" drive rachets trying to get them broken off!!!!:lol::uhmk::uhmk::uhmk::lol:

We still laugh about that.