The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Racing and high performance (trucks haulin more than hay) (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=60)
-   -   How about some pics of High Performance haulers. (https://67-72chevytrucks.com/vboard/showthread.php?t=276897)

regan wilson 06-04-2014 07:54 AM

Re: How about some pics of High Performance haulers.
 
Quote:

Originally Posted by dragtrucks (Post 6705413)
Jordin is going to start out in Super Gas and Maegan is starting out in Super Street.

Maybe I will see yall in Shreveport or Noble.

flamingbig10 07-21-2014 12:30 AM

Re: How about some pics of High Performance haulers.
 
http://i147.photobucket.com/albums/r...psab63c51e.jpg

68 C-10 KID 07-25-2014 12:28 PM

Re: How about some pics of High Performance haulers.
 
1 Attachment(s)
Hood and bumper finally painted after many years.

Hart_Rod 07-26-2014 09:36 AM

Re: How about some pics of High Performance haulers.
 
Quote:

Originally Posted by 68 C-10 KID (Post 6775618)
Hood and bumper finally painted after many years.

Looks great! Is that a glass hood?

68 C-10 KID 07-26-2014 05:27 PM

Re: How about some pics of High Performance haulers.
 
Yes it's glass.

blzr454 11-10-2014 04:10 PM

Re: How about some pics of High Performance haulers.
 
4 Attachment(s)
81' BLAZER, converted to truck, chopped roof and other body mods. Totally street legal truck. These pics are about 4 years old since the I did the gauge cluster, interior work, JW Speaker headlights.

pump gas 454,NOS, TH400, TRANSBRAKE, 4000 STALL, 9INCH 35-SPLINE

Hankster 05-09-2015 11:46 PM

Re: How about some pics of High Performance haulers.
 
2 Attachment(s)
Thread Bumpppppp. Info in signature below.

68racer 06-22-2015 04:48 PM

Re: How about some pics of High Performance haulers.
 
https://scontent-lhr3-1.xx.fbcdn.net...01&oe=56327214

1Bad62Pro/Street 06-22-2015 07:53 PM

Re: How about some pics of High Performance haulers.
 
http://k41.pbase.com/u49/bmc1/upload...5prostreet.jpg

http://www.fullsizechevy.com/forum/i...t-pickups.html

68racer 06-24-2015 09:27 AM

Re: How about some pics of High Performance haulers.
 
https://scontent-lhr3-1.xx.fbcdn.net...39626019_o.jpg

jbrady 09-23-2015 04:33 PM

Re: How about some pics of High Performance haulers.
 
https://scontent-ord1-1.xx.fbcdn.net...eb&oe=56A152BF

RodsGreen10 11-15-2015 06:05 PM

Re: How about some pics of High Performance haulers.
 
Man you all got it going on!! Nice job all of you. Makes me want to spend more money. I only have a little 385 stroker in mine.

ptc 01-19-2016 02:59 PM

Re: How about some pics of High Performance haulers.
 
Any more pics of your race trucks out there guys???? keep em coming!

tiddlar 02-27-2016 10:18 AM

Re: How about some pics of High Performance haulers.
 
5 Attachment(s)
Not sure if i have posted in this thread already but meh, here goes nothing. 1953 chevy, moser m9 housing, 35 spline axles and strange s-trac center section. Air bags, accuair, mustang II style front susp. Rushforth rated x wheels, 20x15 rear 18x8 front. Mickey thompson sportsman SR's. For engine im planning a 427 SBC (dart little m block) with twin precision turbos. Sheetmetal manifold and efi. I purchased a mock t56 magnum tranny from texas drivetrain performance.

Rannos 02-28-2016 02:01 PM

Re: How about some pics of High Performance haulers.
 
1 Attachment(s)
My ole Worktruck doing work.

dustin72 02-29-2016 12:55 AM

Re: How about some pics of High Performance haulers.
 
3 Attachment(s)
Attachment 1504358
Attachment 1504361
Attachment 1504362

turbotruck 05-24-2016 02:37 PM

Re: How about some pics of High Performance haulers.
 
3 Attachment(s)
68 C10
355 sbc turbo
th400
stock suspension

68racer 08-01-2016 04:40 PM

Re: How about some pics of High Performance haulers.
 
Trying to post a video

https://www.facebook.com/patrick.p.m...5033401787538/

sixty4bigwindow 12-15-2017 03:40 PM

Re: Post pics of truck drag racing or racing trucks
 
Quote:

Originally Posted by Super73 (Post 2559297)
Yeah, I'm starting to try and take weight out. Took the front bumper off the other day and cut the frame horns back. I'm going to build a roll pan for it. I might actually make it more of a square bumper looking piece.

Yanked the heater box as well.

I have a Vega Steering box that I need to go find a pitman arm for, that will get rid of the steering pump and big huge power box.

Any sugestions on a OEM dual resevor manual brake master? That's another thing I was to swap out.

Those are the weight savings on the cheap, I want to buy a glass hood first, then fenders, maybe nose come too. But that will be in stages.

I was thinking about cutting out the factory front cross member and redoing it in 2x3 .120 or .180 wall... But that might be a ton of work for very little savings.

Reviving this old thread on a question. Would that Vega box bolt in to my 64 2wd?? I'm trying to get rid of this leaky, crappy power steering setup I have and have a temporary fix until I get the rack and pinion.. Ebay has a full setup right now for 140 shipped. Wondering if this would be a good route to go??

poser 12-15-2017 11:01 PM

Re: How about some pics of High Performance haulers.
 
5 Attachment(s)
some pics of one of my summer toys
:chevy:
[ATTACH][ATTACH][ATTACH]Attachment 1717282

Attachment 1717283

Attachment 1717284

Attachment 1717285

Attachment 1717286[/ATTACH][/ATTACH][/ATTACH]

poser 12-16-2017 01:13 AM

Re: How about some pics of High Performance haulers.
 
Hi 64 the vega box doesn't directly bolt into your truck. the mounts are wrong and the output shaft is too short anything can be made to fit as long as the pitman arm will bolt up.:burnout::

turbotruck 12-20-2017 04:09 PM

Re: How about some pics of High Performance haulers.
 
1 Attachment(s)
2017 using ms3pro efi , still a turbo sbc

rat454ci 02-01-2018 01:56 PM

Re: How about some pics of High Performance haulers.
 
2 Attachment(s)
My 7.0 truck.

Street Smart 02-01-2018 02:32 PM

Re: How about some pics of High Performance haulers.
 
http://67-72chevytrucks.com/gallery/...-17_1B_079.jpg
So far I`ve gone a 12.56 at 109.49, might have a little more in it. Trans tune is still a little funny. Weighs in at 4940

Street Smart 02-01-2018 02:56 PM

Re: How about some pics of High Performance haulers.
 
http://67-72chevytrucks.com/gallery/...1B_199_sub.jpg
Traction !!!!

jgh64pkup 02-22-2018 02:49 PM

Re: How about some pics of High Performance haulers.
 
Quote:

Originally Posted by rat454ci (Post 8175581)
My 7.0 truck.

Do you have a build thread or anything on this?

rat454ci 03-08-2018 01:41 PM

Re: How about some pics of High Performance haulers.
 
Quote:

Originally Posted by rat454ci (Post 8175581)
My 7.0 truck.

68 stepside, BB 468, turbo 350, stock suspension, full interior w cage, plate nitrous, 4.56 gear, 29-10.5 tire, best 1/8th 6.78. 60ft 1.50.

boonedogs72 11-07-2019 12:22 AM

Re: How about some pics of High Performance haulers.
 
2 Attachment(s)
Building one to replace the one I shouldn’t have sold. This time it will be wanted I wanted to build the first time though!

boonedogs72 11-07-2019 12:26 AM

Re: How about some pics of High Performance haulers.
 
1 Attachment(s)
Not sure why they are sideways...

regan wilson 11-07-2019 09:16 AM

Re: How about some pics of High Performance haulers.
 
Nice

68racer 05-18-2020 06:54 PM

Re: How about some pics of High Performance haulers.
 
Old video that just emerged on facebook:

https://www.facebook.com/vetmanuk/vi...8291846988764/

Not sure that worked.

novaX522 12-06-2023 11:46 PM

Re: How about some pics of High Performance haulers.
 
2 Attachment(s)
I’m setting up my c10 to be a daily driver and capable of pulling an open trailer. It ran a 16.25 in a headwind. I think it could dip into the 15s otherwise. It has a 350 vortec, headers, performer intake and 600 Edelbrock carb. Not impressed with the carb, but it get great mpg. 600 or 650 Holley would help. 350 trans, stock converter, and 3.07 gear.
My elCamino is street and strip. I drive it everywhere. 496, solid flat tappet cam, 781 oval port heads, performer intake, 950 hp carb on e85. 400 trans, 8” converter, 3.70 gears. 3,800 lbs. 1.44 60’, 6.72 1/8, 10.72 1/4.

djracer 12-07-2023 12:58 AM

Re: How about some pics of High Performance haulers.
 
Cool pair of Hot Rods!!
Quote:

Originally Posted by novaX522 (Post 9264466)
I’m setting up my c10 to be a daily driver and capable of pulling an open trailer. It ran a 16.25 in a headwind. I think it could dip into the 15s otherwise. It has a 350 vortec, headers, performer intake and 600 Edelbrock carb. Not impressed with the carb, but it get great mpg. 600 or 650 Holley would help. 350 trans, stock converter, and 3.07 gear.
My elCamino is street and strip. I drive it everywhere. 496, solid flat tappet cam, 781 oval port heads, performer intake, 950 hp carb on e85. 400 trans, 8” converter, 3.70 gears. 3,800 lbs. 1.44 60’, 6.72 1/8, 10.72 1/4.


regan wilson 12-12-2023 09:12 AM

Re: How about some pics of High Performance haulers.
 
That El Camino is pretty impressive. Cool Hot Rods for sure.

novaX522 12-13-2023 12:03 AM

Re: How about some pics of High Performance haulers.
 
Quote:

Originally Posted by regan wilson (Post 9265922)
That El Camino is pretty impressive. Cool Hot Rods for sure.

Thanks Regan! I sold my bracket car last year and needed something fun to do. The 496 was my backup bracket motor, so I plugged it in my elCamino. I’m gonna be doing some drag and drive events with it. I actually got signed up for Sick Summer in ‘24. Excited to give that a try!

TotallyHucked 01-12-2024 06:46 PM

Re: How about some pics of High Performance haulers.
 
3 Attachment(s)
Mine is getting there! Got a ~425hp 5.3, T56 and 3.90s in it, just picked up the whole TCI Engineering suspension setup. The goal for '24 is to have it be a cone killer :metal:


All times are GMT -4. The time now is 10:30 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com