Re: Dutch '59 Fleetside Longbed
 

maybe even...
rotate
+back
+down
+to the left (if you have enough lock spare)

Re: Dutch '59 Fleetside Longbed
 

Thank you Sir!!

Nev68,
I thought you would have the same problem ;)
Bought some new headers, that I think clear the steering rack, but have to modify the shaft.
We'll see in a few weeks how that ends....

Bogape,
Never thought of that.
Great tip!!
I will look into that.
Rotate and a bit to the left.....maybe.....:rolleyes:

Re: Dutch '59 Fleetside Longbed
 

Not much done last week.
Only repaired the hinges.
I took out the old pins with nylon bushes (don't think they are stock, don't they??) and pushed in some new bronce bushes and new pins.
Hinges work like new now :metal:

Old and new....
https://lh4.googleusercontent.com/-g...o/P1260475.JPG

Now that's done, while waiting for headers to arrive, I want to know if someone can point me in the right direction of mounting points for three-point safety belts.
I have a small window cab, someone allready made shoulder mounts and post some pictures of that??
Thanks!!

Re: Dutch '59 Fleetside Longbed
 

Finally finished the trans cover.
Ground off the upper part off of the old beat up cover and welded it to a new steel plate.
No holes anymore :metal:
Looks a lot better now!

https://lh4.googleusercontent.com/-y...o/P1260476.JPG

https://lh4.googleusercontent.com/-h...o/P1260478.JPG

Re: Dutch '59 Fleetside Longbed
 

The trans cover looks really good. Nice work!

Re: Dutch '59 Fleetside Longbed
 

Kees, nice job on the cover...Jim

Re: Dutch '59 Fleetside Longbed
 

Very nice job on the trans cover.
Kim

Re: Dutch '59 Fleetside Longbed
 

Kees check "
Registered User

Kim57's Avatar

Join Date: Aug 2007
Location: Corona, California
Posts: 6,499

Re: Dunce's 59 Fleetside build

Post 147 for upper seat belt attachment.

NC

Re: Dutch '59 Fleetside Longbed
 

Thanks NC, I did see that one.
But it's a big window, so maybe there's another solution for small windows?
It's a good one tho!

Re: Dutch '59 Fleetside Longbed
 

Didn't do much last week.
But I managed to make a prototype doorlatch system out of a BMW 520i.
Those cars are easy to find at the scrapyard, that's why I used this one.

The stock doorlatches on my truck were in very bad shape, you had to throw the door with such force to get them locked. If they locked...
I do not think that's save, so I've come uo with this:

https://lh4.googleusercontent.com/-U...o/P1260481.JPG
I've got a complete set: doorlatches, strikers, locks, inside and outside handles, cables, you name, I've got it.

But I only used the latches and strikers yet. Used the original metalwork from the door and B-pillar as templates.

First I made the latch fit the door:
https://lh6.googleusercontent.com/-8...o/P1260483.JPG

https://lh4.googleusercontent.com/--...o/P1260485.JPG
I draw the contours of the latch on the door that have to be removed, but in such way, I kept the windowslider at the inside of the door.

First made a template of cardboard and took it over to 16 gauge metal:
https://lh4.googleusercontent.com/-_...o/P1260486.JPG

Bend it in the right shape, and made the hole for the claw:
https://lh4.googleusercontent.com/-D...o/P1260487.JPG

https://lh6.googleusercontent.com/-K...o/P1260488.JPG

https://lh6.googleusercontent.com/-O...o/P1260489.JPG

This part is being bolted to the door, just in case I have some repair on the latch. This way I always get to it.

I also had to reverse the handle on the latch to get room to operate the latch. Now it works as it should.
https://lh6.googleusercontent.com/-a...o/P1260490.JPG

Now I have to make a lever that works with my stock outside doorhandle and the new latch. I know I can make this work, so give me a bit of time ;)

On to the B-pillar:
Ground a big piece out of it...
https://lh6.googleusercontent.com/-W...o/P1260491.JPG

Made a piece of 14 gauge flat steel to fit into this hole
https://lh4.googleusercontent.com/-L...o/P1260492.JPG

Put the striker at the right place, made some holes and bolted the striker in his place:
https://lh4.googleusercontent.com/-s...o/P1260493.JPG

https://lh6.googleusercontent.com/-h...o/P1260494.JPG

With no adjustment or what so ever , I shut the door and fell right into it's lock :metal:
It works great!!

https://lh6.googleusercontent.com/-y...o/P1260495.JPG

Now it's only welding and grinding new metal to make it nice, but that is work for after my vacation.

Some purists will say this latch is a no go, but I don't care, its a little bit bigger then a stock doorlatch, but when its done, it just a nice working latch, and a hell of a lot saver then those stock locks that wouldn't shut most of the time.

Oh, my new headers came in last Friday, now I can see if I can make these fit. I only have one week before I leave on vacation, I want to turn the truck into a roller, so the truck can be moved to another barn for five weeks, before I get back to it..
Hope these will work with the steeringcolumn, pics of it come tomorrow ;)

Re: Dutch '59 Fleetside Longbed
 

Kees, really nice work on the door latches. Enjoy your vacation time!

Re: Dutch '59 Fleetside Longbed
 

Thanks Doug!
I still have a week and a half to get it rolling ;)

Re: Dutch '59 Fleetside Longbed
 

Nice solution but I would rethink your decision to just use three small screws to secure the latch to the door. Odds are low, but it you ever get in a roll over situation (been there) stress on the top and a pillar will pop those screws in a second. I would add some short perimeter welds, easy to grind off later but lots of peace of mind. Also will keep everything in alignment when your strong arm friends slap the door because "that is what you need to do" on old trucks and cars.

Re: Dutch '59 Fleetside Longbed
 

Ah, I see you don't know me OrrieG...:lol:

As I said it is a "prototype" I meant this is just the beginning.
Those three screws are there to just hold it in place, there are nuts and bolts welded in in the future ;)
So don't worry, everything is going to be stronger then factory :metal:

Re: Dutch '59 Fleetside Longbed
 

Kees, like where your going with this, can't wait to see the finish set up...Jim

Re: Dutch '59 Fleetside Longbed
 

Very nice solution to the door latches.
Kim

Re: Dutch '59 Fleetside Longbed
 

Thanks Jim and Kim!!

Test fitted the new headers today.
They don't come even close to the rack & pinion ;)
But....just as Nev68, I now must re-route the column around the header, I think this is possible with use of an extra bearing.

https://lh4.googleusercontent.com/-j...o/P1260498.JPG

https://lh4.googleusercontent.com/-J...o/P1260499.JPG
Just needed a little notch in the upper framerail.

https://lh4.googleusercontent.com/-U...o/P1260500.JPG

https://lh4.googleusercontent.com/-V...o/P1260501.JPG

Column hits the header, and I must re-route the brakelines.

https://lh6.googleusercontent.com/-9...o/P1260502.JPG

I think I have to go around the header at the outside, someone have an alternative option?
Don't want to cut the header up....

And with my vacation in mind, had to get the truck rolling, well, it now stands at his own wheels for the first time!!!
I'm happy :uhmk:

https://lh4.googleusercontent.com/-_...o/P1260503.JPG

Re: Dutch '59 Fleetside Longbed
 

this is the style of header I have on mine with a mustang II front suspension. By the way have a great holiday!

Re: Dutch '59 Fleetside Longbed
 

I just went back through your thread and seen that you already tried this style of header. It looks to me you could move that engine back quite a bit. If it was me I would move that engine back.

Re: Dutch '59 Fleetside Longbed
 

Too bad you have to move again.

Re: Dutch '59 Fleetside Longbed
 

Well it's good those headers fix one issue but too bad they cause another. From what I can see the outside looks like your only option unless you change the position of the column it also looks like you'll need a few u-joints to get around the headers but you can certainly work with that.

Cory

Re: Dutch '59 Fleetside Longbed
 

Nice job on the latch. Glad you finally found headers that will work.

Re: Dutch '59 Fleetside Longbed
 

Kees, the headers look really good. You can route the steering around. Here are some options and ideas that may help....http://www.borgeson.com/Designing/basic.html

Re: Dutch '59 Fleetside Longbed
 

Nice looking headers.
Truck looks good on the ground.
Kim

Re: Dutch '59 Fleetside Longbed
 

Thanks for the website Doug, they have good info!!
My first thought is the one second to last...

It's only while I'm on vacation ;)
It isn't so bad....It's 8 meters away from here ;)

I knew this was going to be a problem, but I will solve it :metal:

CMACDONALD1's option is not going to work for me, yes, I could set back the engine about 1,5" but that won't give me the clearance I need.

Thanks Lower50's!!

Thanks Kim!
It has to come down a bit more, but first I have to see it with all the metal on it when finished.

Re: Dutch '59 Fleetside Longbed
 

Today we put the bed on, temporary, because of my coming vacation.

Everybody says the four XJ12 shocks are stiff, but I found out they are quite soft.
With some things in de bed such as half the front clip, the truck is even too low :metal:

First I took some supports away to clear the diff. have to reposition the two middle ones.

https://lh6.googleusercontent.com/-O...o/P1260509.JPG

Then we put the bed back on to see what it looks like:

https://lh4.googleusercontent.com/-U...o/P1260510.JPG

Rear is just right, front has to come down a bit, I think 2" is enough.

https://lh4.googleusercontent.com/-T...o/P1260511.JPG

https://lh4.googleusercontent.com/-Y...o/P1260512.JPG

Remeber, it's a steady lowered truck, no airbags, so I can't go to low with all those speedbumps overhere....

Now it's just clean the supershed and roll the truck into the next shed for about 5 or 6 weeks before I can start wrenching again.
But, I also can use some vacation :four:

Re: Dutch '59 Fleetside Longbed
 

Looks really good sitting there! Your vacation is 5 or 6 weeks in a row? Very nice!

Re: Dutch '59 Fleetside Longbed
 

Looks real good.
Kim

Re: Dutch '59 Fleetside Longbed
 

Doug, 4 weeks in a row :metal:

Thanks Kim!! By the way, how's your truck doing lately?

Re: Dutch '59 Fleetside Longbed
 

Kees, those headers are just what the doctor ordered!!! looks great! I think you will find much less headache with these overall than where you were. You might want to wrap the collectors after you get the muff pipes on as it will keep your floorboards cooler too....

Enjoy the vaca!!!! :metal:

Re: Dutch '59 Fleetside Longbed
 

Thanks PTC!
I live in the Netherlands..... no collectorwrap for me ;)
Three quarters of the year it's cold here, better put airco in a dragracer in SAC :lol::lol:;)

Re: Dutch '59 Fleetside Longbed
 

Ahhhh I see you guys NEED floor warmers!!!! lol .... well that should do the job nicely for you then! -

Oh I will be having having AC in the dragracer! no sense in being overheated at 150mph!!!! lol ;)

Re: Dutch '59 Fleetside Longbed
 

The stance is killer :metal:

Re: Dutch '59 Fleetside Longbed
 

Truck is moved over to his new vacation home, for four or five weeks.
Rolled on his own wheels :metal:

So now I'm off to Spain!!! :ito:

See you all in a few weeks!!

Re: Dutch '59 Fleetside Longbed
 

Kees, have a great vacation, get plenty of rest, then get back home and back to work:devil::metal:;) have a great time...Jim

Re: Dutch '59 Fleetside Longbed
 

Thanks Jim!!

I'm back in Holland, save and sound. Had a great holiday! RV cleaned and put in the garage for next time.

Ready to start wrenching again.
I can go back to the Hot Rod Shed next week, so I can unpack the truck and go on where I left :metal:

Re: Dutch '59 Fleetside Longbed
 

Welcome back Kees! Hope you enjoyed the time off.

Re: Dutch '59 Fleetside Longbed
 

Yeah, I agree, welcome back...Jim

Re: Dutch '59 Fleetside Longbed
 

Small update so you know I will get back to it ;)

Last Saturday we pulled the truck out of it's vacation cave...

https://lh3.googleusercontent.com/b4...l=w694-h925-no

https://lh3.googleusercontent.com/tE...=w1122-h842-no

You see, i's a truck in a truck, that's why it's so heavy.
All the parts, tools and (sheet)metal are in the back.

Now it's in his little Hot Rod Shed again, I can unpack the truck and go working on it again

https://lh3.googleusercontent.com/Xh...=w1122-h842-no

I'll try to get back on it this week, so look for the usual updates from good ol' Holland!!
If you're interested that is....

Re: Dutch '59 Fleetside Longbed
 

I am ready for the New updates.
Good luck