Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Quote:
Plan ehhh...? Quote:
|
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Went over to Robin Hood Pub and met up with some of the BHRA guys, along with Ricky.
Had a drink, few hours chat and then came home. Of course scrubbing mats at 10.00pm out back is nothing unusual. Came out good. http://i294.photobucket.com/albums/m...psxjutqxvm.jpg Tomorrow I will add a bit of furniture polish to make them pop and fit them. Loving this non project truck. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Quote:
Only sold in man sizes XXL up yo 4XL :mm: Waiting for daylight so I can get on down to the shop. 1’C out there this morning. May see me in an overall and shoes today. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Shoe's THIS I have to see!:lol:
|
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
:agree:
|
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Quote:
Quote:
So last night, Ricky who brought me the mats for the truck, knowing I like a knife, and also that I love miniature items, brought me a serious dagger. http://i294.photobucket.com/albums/m...psreac6osp.jpg http://i294.photobucket.com/albums/m...ps4hcoaydo.jpg After adding a bit of shine to the mats, as well as cleaning the previous set I had, that then went in for the rear seat, it looked like this. I love it for sure. http://i294.photobucket.com/albums/m...pswm8bkftb.jpg It rained intermittently today, typical of the day I chose to take off work. So I did lots of little random jobs in the garage, moved stuff about, made some space. Also grabbed a large can of satin black, and after cleaning the wheels, I sprayed the centres three coats of black. Next will be Silver Hammerite paint along the edge. http://i294.photobucket.com/albums/m...psihuvafun.jpg http://i294.photobucket.com/albums/m...psprnacsgj.jpg One of today’s planned tasks was to modify the VW Polo Towbar to make it fit the Blazer chassis. http://i294.photobucket.com/albums/m...psem2wmkro.jpg http://i294.photobucket.com/albums/m...pscgxrix3i.jpg I believe this is where Lee, the previous owner had removed the old Towbar. So it will be the new mounting point once I figure it all out. http://i294.photobucket.com/albums/m...psfhs2i8yh.jpg Up it goes. And yes, axle stands too. http://i294.photobucket.com/albums/m...psyyyjxoi0.jpg Coffee break looked like this, and I got optimistic, only to be rained out 20 minutes later again. Grrrrrrr....!! http://i294.photobucket.com/albums/m...psahzv5n7m.jpg |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
1999 Jeep Cherokee wheels.
£80.00 for 5 Opinions?? http://i294.photobucket.com/albums/m...pssffecdhw.jpg http://i294.photobucket.com/albums/m...psjrxlgji2.jpg Just an idea..... |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
I didn't think the Cherokee wheels were the same bolt pattern. Thought they were 5x5.5?
|
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Quote:
As isoften thecase, in this case the third time this week.... Prozac had ajob to do. Headed over to PaulF’s tocollect his hydraulic press. Will be needing that tomorrow. His splits meeting Prozac, http://i294.photobucket.com/albums/m...ps21gdxmge.jpg Loaded along with a 1960 vintage table that was in the back of Prozac already http://i294.photobucket.com/albums/m...pssd1dfknm.jpg Back at home, security had to check. http://i294.photobucket.com/albums/m...pseuktarht.jpg Moving it from Prozac to garage. Amazing how easy the wheels made it. http://i294.photobucket.com/albums/m...psui3eakzw.jpg Waiting for tomorrow when @PaulY gets here. http://i294.photobucket.com/albums/m...psozcw6s0z.jpg Then back to the Towbar issue, needing to be mounted off the chassis. http://i294.photobucket.com/albums/m...pswlqqv9pm.jpg Measure, visualise and http://i294.photobucket.com/albums/m...pslpdss7oa.jpg Cut http://i294.photobucket.com/albums/m...pskofaxjwm.jpg And finally trimmed to size, http://i294.photobucket.com/albums/m...pseo7cwwyj.jpg Ready to be welded and fitted. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Anybody Else see Those SHOES?:lol:
|
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Quote:
|
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Quote:
Quote:
Update in the morning |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
So Saturday started thus.
http://i294.photobucket.com/albums/m...pssn44ddil.jpg I got the truck off the rear axle stands and then turned it around on the lawn, not a clever thing as there are a load of wheel tracks/trenches from the weight of the truck. I usually reverse stuff down the drive as it’s easier that way, but when @PaulY got there we would be needing the front end facing the garage entrance. A rare sight this way around. http://i294.photobucket.com/albums/m...pslinhdryi.jpg Up on axle stands, wheels off and tools ready so that when Paul got there by 10.30 we could carry on. http://i294.photobucket.com/albums/m...psyjuqhyij.jpg Mickey came around to check up on us as he heard the motor earlier on. http://i294.photobucket.com/albums/m...psmtwottaq.jpg This guy has always got a smile, even when things go badly wrong, he just grins and says something like “well, let’s think about it, we just need to get on and do this thing” http://i294.photobucket.com/albums/m...psmhjrkprv.jpg The blue house carpet I brought home last week came in handy, two layers helped against the bone chilling cold while the wind continued to drop the temperature for us. Busy Busy Busy...... and yes, I helped (a little bit) http://i294.photobucket.com/albums/m...pss7hqhboc.jpg DIRTY BIG THING, DIRTY DIRTY DIRTY. Lower control arm. http://i294.photobucket.com/albums/m...pshsrfclbw.jpg Scrape, dig, clean up using knife, chisel and brush, then washed with a hard toilet brush and loads of petrol. http://i294.photobucket.com/albums/m...psrtf8i72r.jpg Followed by commercial kitchen degreaser that smelled lovely. Then once it dried away, pressure clean, wash and dry. http://i294.photobucket.com/albums/m...ps1aoo7wyk.jpg Clean parts are so much fun to work with. The 40 year old bushes and ball joints still needed to be removed. More in a bit. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
So we continued to dismantle, clean, strip and swear from time to time. (I do most of the swearing, @PaulY jut get on with it)
The amount of dirt stuck to this truck, possibly the same as most or many other 40 year olds is staggering, possible a good rust preventative though. Both sides torn down. http://i294.photobucket.com/albums/m...psd93wdome.jpg Next job of course was to clean, service and refit new parts to the Control arms. http://i294.photobucket.com/albums/m...psnyygznid.jpg The springs removed form the truck were as impressive as any that had been torched before. Useful only as ballast when weighing something in. Take a good look. Before you burn them. Measuring 11 inches. http://i294.photobucket.com/albums/m...psypyjwx5d.jpg So a new pair were selected from the pile, and measured, offered up and then Dr Bosch Grinder came in. Surgery. 13 inches saved to be fitted. Happy. http://i294.photobucket.com/albums/m...pshh6c5ssy.jpg The next big job was a YouTube research job...... Easiest way to remove the 40 year old swing arm bushes. Dr Bosch Drill to theatre. Bench mounted, a few large drill bits sacrificed Two per swing arm = 8 total. http://i294.photobucket.com/albums/m...ps9qwtwice.jpg Followed by Mr Press. This tool, belonging to @PaulF was the most sensible thing to bring to the party. Not always easy to use, needed loads of small custom pressing pieces made through the day, each taking time, and finding the right materials being a pain too, it worked a treat. http://i294.photobucket.com/albums/m...psadzbrcic.jpg New brake shoes added while the front end was dismantled. http://i294.photobucket.com/albums/m...psttpmmh2y.jpg As we got busier and time drained away, I took less photos. Needles to say, once the old bushes were removed and the new once’s pressed into place, often necessitating restarts the Ball joints were removed, replaced and then I took each piece out to a tree, hung them and painted the fresh metal in underbody sealer, getting a lovely uniform and clean look. By 8.30 Paul had completed the reassembly, I still need to go back to torque up everything, change the position of the passenger side lover swing arm arm as it seems to have escaped the locating points. Brake on passenger side needs bleeding. Then I need to do the steering or tie rod ends, as we ran out of daylight and ambition, the cold is a killer. Finally I also need to remove and replace the existing front wheel bearings. Tired but happy, we closed shop at 8.30 Sleep was a problem for me, netting a total of three hours, and then awake for 4 hours, followed by another hour. Today it was rain, wind and 5’C all day, so I decided to go shopping for food, paint and Silver Hammmerite for the wheels once the sun returns. This afternoon I popped down to the garage to check the height and get a pic of the new height. A sure sign of us being tired toward the end. http://i294.photobucket.com/albums/m...psfxwgpbvs.jpg Front end came up 35 mm Looking a load better, rear seems to have gone down a bit, 5-10mm http://i294.photobucket.com/albums/m...psutnkzfsr.jpg So there you go. One step closer to an MOT submission. Thanks for checking in and making your comments all. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Thanks to Paul’s expert guidance I have now just ordered a set of these.
Looks like the rear will be dropping by 2 inches. http://i294.photobucket.com/albums/m...psgcmk2f7y.jpg http://i294.photobucket.com/albums/m...psbzoljtem.jpg And so ends another good MoJo filled weekend. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
That's sitting much better now, a 2" drop at the rear will be spot on, another good weekends work :metal:, great to see Paul Y back in the "fold" too :lol:
|
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Great progress for having to work outdoors in between showers.
Be careful with your new dagger, it looks like it really could do some damage. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Front looks much better and ride will be much improved too.
|
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Quote:
But he will be back, along with Woody once his life gets back to an even keel. But it’s always good seeing him and spending time with him. He is a good man. Quote:
Yes the new dagger is a dangerous weapon, especially in the wrong hands. Cold work hurts, but progress certainly feels good. Quote:
Agreed, front was cartoon like and functional, but rubbish. I suspect it will all handle better now. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Thought I would post up a few useful or interesting links.
THANK YOU TO THOSE RESPONSIBLE FOR CREATING THESE RESOURCES. FRONT END REBUILD TUTORIAL http://www.73-87.com/7387garage/chas...n/frontend.htm BLAZER PICTURE THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=331470 FULL AND COMPLETE 1979 CHEVY LIGHT TRUCK SERVICE MANUAL. http://www.73-87chevytrucks.com/tech...ice_Manual.pdf Garage cat warning. http://i294.photobucket.com/albums/m...pslo3orbsb.jpg Someone asked if the Teardrop Trailer still existed. Yes it certainly does. http://i294.photobucket.com/albums/m...psr1haupel.jpg And it seems Dennis has pretty much used up all the wood on his gas station replica build. Perfect timing for a winter outfit, now the inner walls, insulation and electrics are done. http://i294.photobucket.com/albums/m...psapomzuub.jpg With winters chill and short days here, it looks like the truck will mainly be getting weekend time now. Off to London again today, back after dark. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Great progress on the Blazer. Looks beater with the front raised a bit.
its been a little cooler here last week, but that seems to be gone again. Back in the 80's (26-29 C)yesterday and today... Rain coming Wednesday and Thursday, but hopefully a nice weekend if the weather man is right... |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Quote:
It has gone cold now. Hope to have some good weather to complete last weekends work. Currently on the look out for a set of 15 inch beauty rings, wheel trims, call them what you like. The original photo I took of it a few years ago shows it with a set of trimmrings fitted. I did try to fit the trim rings from the C10’s Rallye wheels, but they would not get themselves seated. So stil looking. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Went down to the garage a few minutes ago, it’s bloody cold out there.
Wanted to check and see if my bought 10 years ago, used a few times, Torque Wrench still worked. http://i294.photobucket.com/albums/m...psejbyyh80.jpg http://i294.photobucket.com/albums/m...pspgqqhdru.jpg |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
No color with the VIN. However the SPID tags were on the Driver's side (US ;) ) inner fender. Maybe yours is still there and readable?
|
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Quote:
Or anywhere else. Dennis has a few other secret tips to follow up on. |
All times are GMT -4. The time now is 12:53 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com