Re: My Facetruck thread.
had some some fun with Mrs. Bee's wagon last week..
nanny was sick so we were picking up kids from school, Thursday was my turn while backing into the driveway I look out the front and I'm all what the heck is that? https://dl.dropbox.com/s/yzdzznr2f66...33463.jpg?dl=0 get out of the car to find this, arrow points to a pinhole in one of the oil cooler hoses, streaming like a fountain :rolleyes: https://dl.dropbox.com/s/ra522fipg3u...33309.jpg?dl=0 https://dl.dropbox.com/s/42kg17ip2uy...33819.jpg?dl=0 well I followed the trail, started about half block from the house and the bottom of the car is fully faired so wasn't any shenanigans, just failed right then and there at least it happened right in front of the house so didn't run out of oil :) must have been a common problem, replacement part is all metal tubing.. local lexus dealer gave me some good guy pricing - manifold, gaskets, and three oil filter cartridges $140, that tubing manifold is about $110 aftermarket plus shipping, didn't bother checking local parts stores picked up parts and installed Friday in time to take kids to tennis Saturday parked it over the clarifier and washed all the oil from the engine and undercarriage, even shined up the outside while I was at it https://dl.dropbox.com/s/pvsf7lwwuck...34385.jpg?dl=0 reinstalled the covers Sunday after confirming all dry and no leaks :) https://dl.dropbox.com/s/skc653p4pp8...34529.jpg?dl=0 kitty litter dried it it out well enough to drive on but we'll be working on that stain for a while, probably end up with one of those pressure washers Larry recommended https://dl.dropbox.com/s/0m4alnmofjc...33941.jpg?dl=0 |
Re: My Facetruck thread.
It's a good turnout to what could have been multiples more expensive had it not been caught so soon. I know you know that. I wonder how many squirt it out on the interstate till it locks up.
I had the notorious leaky oil cooler lines on my '92 K3500. Just seepy and messy, wasn't going to drain it out as long as an eye was kept on oil level. I got tired of replacing them, so I eliminated the cooler. Ran it many more years that way |
Re: My Facetruck thread.
What luck, Killer. I started to say you got lucky, but you tore her car up, so I figure you are on the fence there. :lol::lol:
|
Re: My Facetruck thread.
LoL, ya not sure where I stand on this one.. but near as I can tell I'm still points ahead for speedy repairs and a free car wash, and her car got an oil change :lol:
|
Re: My Facetruck thread.
well Fritz finally broke through the old gate so it was time to build new ones
they were in miserable condition anyway so he actually did us a favor :lol: Mrs. Bee and my son did all the math and got everything square and level - and mostly plumb, as the block walls allowed they also selected all the grain contrast to give it character :) best part is only cost $275 :metal: https://dl.dropbox.com/s/buvyjhjywwd..._0302.jpg?dl=0 sure is nice having free swinging gates that don't have to be carried open and screwed to each other to keep closed :rolleyes: https://dl.dropbox.com/s/ya43kswlcqk...7_028.jpg?dl=0 https://dl.dropbox.com/s/dh75ludnji0..._0167.jpg?dl=0 my young helper took care of filling in the rest of the lower course of screws for me :D https://dl.dropbox.com/s/utjo1uajk1w...59896.jpg?dl=0 the last two pickets for the sides will have to be ripped and notched for the hinges when I have more time but at least the opening is covered for now light sanding and some clear lacquer or light stain or something to preserve the colors and easily last the couple years we have left here https://dl.dropbox.com/s/khwg65k1p7p..._0430.jpg?dl=0 |
Re: My Facetruck thread.
That looks great but don't let your roots get too deep out there.
|
Re: My Facetruck thread.
KB, I don't know if you have noticed or not, but your helper is growing up fast.
|
Re: My Facetruck thread.
1 Attachment(s)
Yup, growing like a weed. I built some quick and dirty gates around here using cedar pickets like KB did. They lasted about 18 years. They were painted, though. I built new ones with welded angle iron frames and 2 X 6 con heart redwood stiles. They will probably outlive me...which was kind of the point. Like this-
|
Re: My Facetruck thread.
yes sir, we notice it the most in his food and clothing bills :lol:
before long he'll be doing the work that's over my head :eek: |
Re: My Facetruck thread.
^^ wow, that's beautiful, very nice work! if I had more time here, more skill, and more $$ I would have liked to have nice gates like that!
we (I) neglected to replace our old gates when they should have been so I had to use what was readily available for the weekend warrior :metal: maybe in the next house ;) btw, I replaced one of the side gates few years ago with same type of kit under similar circumstances, the day after Fritz joined us, look familiar? :lol: at least then redwood pickets were available, unfortunately nothing now so went with cedar.. but I think they look great after seeing them up :) https://dl.dropbox.com/s/urt8stzj9ck...29243.jpg?dl=0 https://dl.dropbox.com/s/uyfmsfkdii6..._2996.jpg?dl=0 |
Re: My Facetruck thread.
Gates all look great!
|
Re: My Facetruck thread.
All nice looking gates, KB!
|
Re: My Facetruck thread.
Quote:
|
Re: My Facetruck thread.
Quote:
|
Re: My Facetruck thread.
Quote:
|
Re: My Facetruck thread.
1 Attachment(s)
Well I was scrolling through FB ;)
And I found this:lol: This is directed towards a certain person, So I hope they do Not get Offended:uhmk::metal::lol::haha::rolleyes: Attachment 2267598 |
Re: My Facetruck thread.
thank y'all for the compliments!
as a heavy junk mechanic by trade, carpentry work isn't easy for me - I appreciate the positive feedback :) |
Re: My Facetruck thread.
Quote:
:lol::lol::lol::lol::metal: |
Re: My Facetruck thread.
well, it was sanding and sealing this weekend, all went fairly smooth ;)
wish the beers lasted as long as the sandpaper :lol: https://dl.dropbox.com/s/v7asrc6t0xv...14826.jpg?dl=0 just clear sealer but really made the grain pop, and shows a little character https://dl.dropbox.com/s/3eurz1bzzsk..._1579.jpg?dl=0 had enough to complete second coat on the finished side, I'll have to get more sealer for the frame side.. I think we're going refinish our picnic table so we'll use up another gallon easy and there's still a third gate behind the garage I'll have to replace to match these https://dl.dropbox.com/s/zso4owa5rpy...15227.jpg?dl=0 went ahead and replaced the side gate pickets, they were too short after we added an extra course of block https://dl.dropbox.com/s/cmbgn3r03la...15353.jpg?dl=0 |
Re: My Facetruck thread.
That looks great.
|
Re: My Facetruck thread.
You have got those Gates Looking Great:metal:
The Sandpaper Quality varies.:ito: So the Longevity varies ;) About that Bottle you have? Once you take the Top off:uhmk: It starts leaking and Evaporating:haha::haha::haha: |
Re: My Facetruck thread.
thank you!
that's it, they all evaporated :lol: |
Re: My Facetruck thread.
Gates look very nice
|
Re: My Facetruck thread.
Nice gates!
|
Re: My Facetruck thread.
Gates look great
|
All times are GMT -4. The time now is 02:00 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com