Re: PO has me PO'd
I like to tape every couple inches, making sure the back of channel stays engaged, thats where the tape helps
Catching the channel pry down and push up on the tool, you'll see when you actually do it Headlamp really helps to see Don't let it out of your sight https://live.staticflickr.com/65535/...934d2ae7_c.jpg16985850637243555851802622212635 by [url=https://www.flickr.com/photos/97391199@N06 |
Re: PO has me PO'd
Ok stop at this point, and get the gasket over the L bracket
Helps to tape lower channel to avoid pulling gasket out of channel https://live.staticflickr.com/65535/...a57568da_c.jpg16988456040303382952337659992035 by [url=https://www.flickr.com/photos/97391199@N06 |
Re: PO has me PO'd
I see this is a tedious process need patience of a saint :)
|
Re: PO has me PO'd
ah yeah, I work on it awhile then put it aside
|
Re: PO has me PO'd
Had to blow my fender apart to get at the lower hinge bolts
Glad I did found alot of unfinished welds, and spider webs https://live.staticflickr.com/65535/...c122b3f0_c.jpg16990213731915127837025528396484 by [url=https://www.flickr.com/photos/97391199@N06 |
Re: PO has me PO'd
Quote:
Wanted to ask you a couple questions about powder coat |
Re: PO has me PO'd
Quote:
|
Re: PO has me PO'd
Quote:
|
Re: PO has me PO'd
Any body remember this stuff in their trunk
https://live.staticflickr.com/65535/...9a651e2d_c.jpg17000666290934071350952786655852 by [url=https://www.flickr.com/photos/97391199@N06 |
Re: PO has me PO'd
Splatter paint. I remember it well.
|
Re: PO has me PO'd
I thought that is what it used to be called, had little specals of turquoise in it
Now krypton calls it stone course texture, obsidian Have to check how strong it bonds to the metal, seems pretty good after drying for 2 days, have use the putty knife test |
Re: PO has me PO'd
Tough stuff, used to have this stuff in the trunk of my 62 Chevy, only it had turquoise speckled
https://live.staticflickr.com/65535/...0b9a5605_c.jpg17002261376286937009066607236262 by [url=https://www.flickr.com/photos/97391199@N06 |
Re: PO has me PO'd
https://live.staticflickr.com/65535/...801df1bb_c.jpg17002269702037740125196384264484 by [url=https://www.flickr.com/photos/97391199@N06
|
Re: PO has me PO'd
Got the last 8 inches of the gasket installed, seems like Widex and pry tool best suited for the job
Seemed like method would replicate installing spline on screen door, but it didn't prove out to be any guicker then the pry bar, but but the finish on the frame failed, might have to go with plating https://live.staticflickr.com/65535/...f8dbebbd_c.jpg17002318377631316869095308798981 by [url=https://www.flickr.com/photos/97391199@N06 |
Re: PO has me PO'd
|
Re: PO has me PO'd
Some place in a desert climate should be a wind wing with this plating
https://live.staticflickr.com/65535/...e602d2df_c.jpg1700235047741738472027850013897 by [url=https://www.flickr.com/photos/97391199@N06 |
Re: PO has me PO'd
Today's debacle
https://live.staticflickr.com/65535/...500d3a96_c.jpg17004974665266040844977846667718 by [url=https://www.flickr.com/photos/97391199@N06 |
Re: PO has me PO'd
Vent window update
https://live.staticflickr.com/65535/...d7802b6c_c.jpg17004976415195996873084173219018 by [url=https://www.flickr.com/photos/97391199@N06 Adjust tension stud |
Re: PO has me PO'd
Threads galled
Wonder what size it is?,303 OD have to check TPI, looks like 24 ,278 at the threads https://live.staticflickr.com/65535/...cf2356da_c.jpg17005798249731050062899400830680 by [url=https://www.flickr.com/photos/97391199@N06 |
Re: PO has me PO'd
https://live.staticflickr.com/65535/...a63fa5bb_c.jpg17012154716626842701964752200098 by [url=https://www.flickr.com/photos/97391199@N06
The post on the right is a 5/16×24 Still trying to figure out the left post They are symmetrical, meaning driver side to passenger side, if you remove latch handle and insert from other side of the glass |
Re: PO has me PO'd
Total frustration over the last 3 days
Can't get the vent window to mount up to the. Frame and gasket https://live.staticflickr.com/65535/...31cd6e89_c.jpg17015308650872776201514556474862 by [url=https://www.flickr.com/photos/97391199@N06 Only thing I can come up with is the angle of the mounting post The second window seems to fit better but not perfect |
Re: PO has me PO'd
Tears on my tablet
Today and tonight, my special son lays in the ICU, machines keeping him alive Please pray for my son Jeremy |
Re: PO has me PO'd
Sending prayers for your son.
|
Re: PO has me PO'd
Quote:
Jess |
Re: PO has me PO'd
Thanks guys, means alot
Outta my hands and into God's Next 2 days will tell |
All times are GMT -4. The time now is 02:32 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com