Re: What Did You Do With Your Truck Today ?
 

More work on the bed sides, just minor stuff. Fleetside spears are really cool, but a PITA to get the ridge straight... Also hung the doors and got them close. Going to do the fenders before doing anymore adjusting. Did find the driver step sill installed high from the factory at the front so door gap at the bottom is off a little. BFH an sturdy oak block moved it a little. Not enough for me to worry about, it did fine for 25 years, next guy can get neurotic about it! Body lines are lining up fine which is what stands out the most.

Re: What Did You Do With Your Truck Today ?
 

Took the Newlyweds for a carriage ride.

Re: What Did You Do With Your Truck Today ?
 

I hung the front fender and looks like it is not the factory. The step is definately higher. I looked at old photos and it is not that high. I replaced that whole lower hinge pocket and from what I can tell from the photos when I welded it up it must have pulled the step up to fill the gap. I am going to cut the joint loose and infill to get it where I want. Will need to repaint that area (arghh) but no biggie. Lesson learned is to look REALLY CLOSE at how the door hangs while tacked, and during the final welding and brace to keep from moving. Passenger side is ok, I only had to replace a part of the hinge opening, not the piece below.

Re: What Did You Do With Your Truck Today ?
 

Got my seat in after having it redone! Not for everybody but I like it! photobucket.com/user/crime_inc/media/imagejpg2.jpg.html]http://i99.photobucket.com/albums/l2.../imagejpg2.jpg[/URL]

Re: What Did You Do With Your Truck Today ?
 

Got the steering box mounted!!!!

Re: What Did You Do With Your Truck Today ?
 

i dig the seat! is that a rebuild original or out of something else?

Re: What Did You Do With Your Truck Today ?
 

Am I missing something? With the steering box mounted on top of the frame rail, the arm will move up&down instead of side to side. What other linkage are you going to ad?

Re: What Did You Do With Your Truck Today ?
 

Thanks. Yes it's a rebuild of the original seat that was in my truck!

Re: What Did You Do With Your Truck Today ?
 

Knocking down 5 layers of paint from previous owners.
I made this silly looking rolling cab cart to make it easy moving the cab in and out of the garage.

Re: What Did You Do With Your Truck Today ?
 

Seat looks killer man!

Re: What Did You Do With Your Truck Today ?
 

Thanks Half Baked appreciate that! I know this style isn't for everybody but it is getting a warm reception.

Re: What Did You Do With Your Truck Today ?
 

Put wheels on to check fit. Finished door.

Re: What Did You Do With Your Truck Today ?
 

I like the hell out of it. Ive been saving the below picture for a couple years now because I do. I'm not sure I WILL do it, but I'm sorely tempted...
http://i832.photobucket.com/albums/z...lanketIdea.jpg

Re: What Did You Do With Your Truck Today ?
 

Dan I seen the picture you posted in the past and I felt the same way, that's what inspired me to come up with my own design. I appreciate the kind words.

Re: What Did You Do With Your Truck Today ?
 

I am headed to Mexico in November, I'll have to keep my eyes out for a new cover for my seat!

Re: What Did You Do With Your Truck Today ?
 

I finished up my new front brake lines and bled them today. Got good pedal and was hoping to neighborhood-drive it today but didn't happen. Maybe tomorrow. I did find the best and least messiest way to add fluid to my CPP under floor master and maybe it will help someone. I impulse bought a five pack of these bottles at Harbour Frt a few years back. I put brake fluid in one, screwed the nozzle off, and stuck on the hose and it worked great. It's easy to top the mc off because the bottle doesn't deliver too much volume per squeeze of the trigger and the flow stops when you release it. I found it more controllable than a squeeze bottle with a hose on it.

BTW, the saddle blanket seats in the previous posts look good. I like them both.

Re: What Did You Do With Your Truck Today ?
 

Another great idea!

Re: What Did You Do With Your Truck Today ?
 

good idea russell thanks for sharing

both seats look good !!!

Re: What Did You Do With Your Truck Today ?
 

I just wanted to add in, i think that seat is REALLY sharp. Not only does it add a little color, but the fact that it looks like it's a part of the seat, and not some sloppy seat cover really adds to the fact. (although I like those covers too. Everything has their place)

Ha ha yeah that was the original pitman arm that I never quite took off all the way. I'm going to have the pitman arm vertical, with a drag link between the steering and pitman arms. It'll be real similar to the original system, except the box will be in front of the axle as opposed to behind.

Re: What Did You Do With Your Truck Today ?
 

Cut the step loose and pushed it down, sill stayed level and parallel with the door bottom. Still needs welded and hammer and dolly work and door gap set but much closer.

Re: What Did You Do With Your Truck Today ?
 

Gave my 57 a facelift!!

Re: What Did You Do With Your Truck Today ?
 

My dad waited 38yrs to give me this wrench.!
I'm guessing he thought i was old enough not to distroy it...?
at least thats what i 'm thinking
.
http://i288.photobucket.com/albums/l...ps3997d459.jpg
.
.

.
I calling this....
" How many thing are just wrong with this scene"......
.
It is not lost on me

All 6 wheels are off and the truck is on jack stand/ assort, wood blox
in a dirt drive way on a hill
working on widow makers and surrounded by very dry grass no fire extingisher
about 2 feet away from a propane tank on one side Oxy/Acetylene set on the other
Busting my hump on a 50 yr old wrench with a 4ft cheeter
.
when will the fun stop.?
.
the rims got alittle hot
.
http://i288.photobucket.com/albums/l...ps3c66fc3a.jpg
.
http://i288.photobucket.com/albums/l...psf4acbbfd.jpg
.
http://i288.photobucket.com/albums/l...psc8373ddc.jpg
.
http://i288.photobucket.com/albums/l...ps5d6338e7.jpg
.
http://i288.photobucket.com/albums/l...ps0c24c83b.jpg

Re: What Did You Do With Your Truck Today ?
 

but in the end i had a vision and it all worked out for the day
.
No lives were lost
.
.
two wheel cylinders per wheel ..Means two adjusters

http://i288.photobucket.com/albums/l...psef0834de.jpg
.
.
http://i288.photobucket.com/albums/l...ps35306f57.jpg
.
http://i288.photobucket.com/albums/l...psdcfed866.jpg

Re: What Did You Do With Your Truck Today ?
 

I like old tools and that lug wrench looks interesting to me. It's actually called a Shock wrench. Here's a link to a tool vendor that gives a little info about it. I first assumed that you hit the ends with a hammer to loosen the lugs but you just spin the arm and the weight of the ends acts like an impact wrench.
http://inlandvalleytoolsupply.com/ken-tool.pdf

Re: What Did You Do With Your Truck Today ?
 

.
.thanks for the Tech info R.A..very interesting.
I did use a large hammer on it.
The wheels Nut's/studs have been soaking for days
but could not penetrate the wheel studs.
I even had to use heat to first take the lug nuts off then after no luck with a hammer and the "Kem Tool'
more heat and a large pipe wrench with a cheater bar & lots of heat
and my fat arse it finally broke loose
I'm beat up ..
Tomorow I'll take the shoe to be relined
......Sp
.
.
.
http://i288.photobucket.com/albums/l...psdcfed866.jpg