![]() |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
@nickwheeler" wrote the following up:
No precision was wasted making these parts . It was time to do something about these ghetto hose-separators: https://hosting.photobucket.com/imag...080&fit=bounds The hoses are 7/8" diameter, and the bulkhead fitting spaces them 38mm apart. Scribe some that looks about right marking to some 8mm aluminium plate: https://hosting.photobucket.com/imag...080&fit=bounds Hack off, and clamp to the mill - a drill press would do - and drill four 22mm holes because that's close enough to 7/8": https://hosting.photobucket.com/imag...080&fit=bounds I milled two straight and parallel edges because I could, but that could have been done with a file. Hacksaw them apart, and lop off the corners: https://hosting.photobucket.com/imag...080&fit=bounds Mill the new edges straight and parallel to the originals, and shape the ends with files: https://hosting.photobucket.com/imag...080&fit=bounds Like this: https://hosting.photobucket.com/imag...080&fit=bounds I rubbed them across 120 and 240 grit DA discs on a piece of granite, using plenty of glass cleaner for a smooth, bushed finish.. No pics, as I did that in between dinner and going out. Old vs New https://hosting.photobucket.com/imag...080&fit=bounds And on the car: https://hosting.photobucket.com/imag...080&fit=bounds The 22mm holes are slightly looser than I'd like, and will benefit from a touch of black silicone next time we have some out. Much happier. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Great these self-made parts and they look great
|
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Quote:
http://i294.photobucket.com/albums/m...x/P1100274.jpg |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Did I mention that Sunday was a busy day.
Loads of yard work etc. Eventually got started on the car, working on the floor, fitting the seats etc. Nick and I had planned a few progress jobs. Get the brakes bled through, get onto the rear lights, in order to button that up. And then this week @nickwheeler remembered he had a large kit to pressure test cooling systems. So the cooling system prime and test was on the cards. While I carried on with my jobs, he fetched a watering can of water, called for a large funnel to fill the radiator and cooling system. I carried on cutting metal and drilling, my power tool noise induced reverie suddenly torn apart by Nicks scream of disdain (OK maybe I have exaggerated) So I flew to his side to find this. Look closely, look again. Pssssssssssss…… https://hosting.photobucket.com/imag...080&fit=bounds After some weird angle photos, and a bit of wriggling, pulling and pushing and loosening, Nick had a trophy. https://hosting.photobucket.com/imag...080&fit=bounds Problem. https://hosting.photobucket.com/imag...080&fit=bounds Some internet research showed that this is a known weakness in these engines. Poop. https://hosting.photobucket.com/imag...080&fit=bounds Clearly, being a known and recurrent fault, has led to it to be exploited to the max. Crazy money. https://hosting.photobucket.com/imag...080&fit=bounds I managed to contact an independent who agreed to selling me a used part for a 1600cc engine at £40.00, just need to make a gasket, used to have gasket paper…. A long time ago. Another job planned was the brakes. Errrrmmmmmm….. No, not happening. A long time ago, the one brake hose that came with the car, seemed perfectly fine. On Sunday, no flow, either with pressure or suction. So using the last of the braided hose, Nick made a new brake hose. Testing the old pipe, with a stainless steel welding rod it seemed it was blocked solid. At the rear a similar scene played out as well. Bloody soul destroying. https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds So there you go. Still no start. As Quoted: What is it they say, 90% done, 90% to go I like that. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Two Stepps forward, one step back.
It'll be fine, you're a great Team. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Quote:
Absolutely Harald Just keep going. Well That used part did not work. Part he had to sell was wrong side. After some digging around he pulled one out. But same flaw and damage. Walked Away. Around the corner to an engineering shop. Where the shift extension came from. 20 minutes consultation later…… I will try fix it myself. Drill this out @8.5mm https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds Then tap and fit this. https://hosting.photobucket.com/imag...080&fit=bounds Delivery 9-16 June. Wonder if they are delivering on foot. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Came home today and the mailman had delivered a new edition of the Illinois Route 66 guide for me.
Thanks @jagwinn for taking the time to show me a kindness when it was needed. https://hosting.photobucket.com/imag...080&fit=bounds Guess it means a road trip has kinda got to be done. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Was chatting with Dennis, and also Alistair, and it is interesting to see how prices are all over the place for flights.
[quote author="@alistairk" source="/post/2733616/thread" timestamp="1653581945"]@grizz I've no idea. Ticket prices seem to be up and down all over. Jiggling a few days either way seems to sometimes affect the prices quite a lot, or going a week earlier or later. Obviously avoid peak school holidays, etc. and special events in either UK or US (like thanksgiving or 4th July whatever) Just play with Skyscanner / Expedia whatever and see how it shapes up. I think my tickets were like £460 but the swine then said that didn't include hold baggage! BA is becoming EasyJet... I paid £50 for my return home bag but I took a seat upgrade with free bags on the way out as they made me a nice offer ;) Also be aware BA have told me "car and motorcycle parts" are prohibited items in hold baggage now... So a bunch of stuff ended up coming home in the boot of the LTD. Hopefully it all makes it here OK...[/quote] You are right, prices are erratic. Agreed, they become sneaky. I was just chatting with Dennis. Then went onto Google for direct flights to St Louis, However, not available. At £683.00 though, I am going. BUT…… The price is cheaper right now, were I to buy (got to sort a new passport and ESTA visa) than in 2019 when I went. https://hosting.photobucket.com/imag...080&fit=bounds |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
:clap::clap:
Got the road map set yet? :mm: ;) :ito: |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Quote:
Need the time to be approved by my boss, they prefer us not to take more than 2 weeks at a time. But then I need to figure a new route for 2022. Friday. Message from @craigrk in India. Seems the new [font size="4"]RR[/font] LED lights have arrived, not,sure,what the final delivered price was. Also got some nice new number-plates ordered and delivered in 48 hrs. Time to start tidying up the interior some more. Carpets to be cut and glued some time today as I am working from home. https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds Happy Friday indeed. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Being out in the garden before 06.00 this time of year, does have it’s perks.
Same can be said for insomnia and being done with early morning admin before 06.30 as was the case yesterday. First training meeting of the day was -9.15 on Teams. So I thought getting these to front floor sections wrapped up, made sense. Sections cut from the roll of carpet I bought. Contact adhesive both sides, laid down, trimmed, stretched, glued on the rear and two parallel sets of 10mm staples run in. Perfect. I hope. https://hosting.photobucket.com/imag...080&fit=bounds Other side. https://hosting.photobucket.com/imag...080&fit=bounds Done. https://hosting.photobucket.com/imag...080&fit=bounds Happy with that. A small carpet will protect the heel area on drivers side. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
So……
One of those awkward jobs done after work. Well, the prototype really. As I only have enough vinyl for one go at making the black gearstick gaiter. First job was to remove the rubber from the original MX5 rubber unit. It will be used to hold down the final gaiter…… far from a professional job, but anyone is welcome to pop over and make me one or mail me a complete replacement piece. https://hosting.photobucket.com/imag...080&fit=bounds Measured and filed away the excess. For those who forgot….. the extension of the gear stick makes the sweep more exaggerated so the hole has to be bigger. https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds I fetched the roll of “Rusty patina” vinyl originally bought when I wanted to buy @pedalcarjoe ‘s wagon, from the garage, Initial plan was to make 4 piece pyramid. Then lodger John arrived with 6 mini Pork pies, and a tub of Chicken Kiev Scotch eggs, a Sprite for me as I never use alcohol if power tools may be used and a Desperado beer for him. “Why not cut a huge circle, pierce the centre and drape it like a skirt, pin it top and bottom…. Job done” BUGGGERR…..Of course he is right, or is he. Both options. https://hosting.photobucket.com/imag...080&fit=bounds Draped. https://hosting.photobucket.com/imag...080&fit=bounds Captured. https://hosting.photobucket.com/imag...080&fit=bounds So…….. Will it work?? https://hosting.photobucket.com/imag...080&fit=bounds Later today I will cut the black to size. Then the transmission tunnel carpet has to be measured, cut and glued down. Followed by refitting the floors, seats, maybe even the last time. But first, I need to get some new work shoes and apply for a new passport. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
[quote author="@cynicaldave" source="/post/2733956/thread" timestamp="1653769635"]Don't stop posting 😮
I know I don't comment much, but I'm thoroughly enjoying following along.... It's the first thread I turn to... Can't wait to see it on the road😁[/quote] I think some days I just feel that I am not sure if I am wasting my time as it takes more than a few minutes to create this content. And I do see this as a record for my own reference. This is not a pity party or anything like that, but it amazes me at times when clearly (I wrote and post on another 8 forums) people only read the photos, and then ask some pretty stoopid questions. And if you point it out, they either leave or make some limp wristed comment . So, to answer your request. Today I did two jobs, along with buying a new pair of work shoes and a £39.00 pair of very neat flip flops, not garage level either…. Some gardening, taking aound 50 photos of myself to try get a passport application in. And it kept failing me, as it saw my eyes being shot (not) and then my face and the magnolia wall being indistinguishable…… Eventually made it to the garage around 3.00pm. But I also made up a plate for the removable show plate to fit on the front https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds There was more done. Pics uploading as I type this up. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Part 2 of yesterday’s short day.
Changed all the nuts for Nyloc’s Cut and fitted some high density foam to cover the protruding bolts etc. Carpeting will be next when I get some more in. https://hosting.photobucket.com/imag...080&fit=bounds Both sides done, floor down. https://hosting.photobucket.com/imag...080&fit=bounds Then measure and cut the two parts of the transmission tunnel from the remaining carpet. https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds Resulting in these weird shapes. https://hosting.photobucket.com/imag...080&fit=bounds And draped in position. https://hosting.photobucket.com/imag...080&fit=bounds These will be glued in place once the gearshift is locked in place, @nickwheeler has a plan for that. Then the gaiter bolted in place and holes for the stick and parking brake cut in the carpet, plus fitting. Seats back in and bolted down. Bootfair totally sucked, cold outside today, and possibly rain this afternoon. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
@nickwheeler came over for a while today.
We both kinda lost our mojo and not a lot got done. But stuff got done. Richard his buddy popped over…….. In a red 4 door Metro they built a couple of years ago. Cool, standard looking transplant. https://hosting.photobucket.com/imag...080&fit=bounds And https://hosting.photobucket.com/imag...080&fit=bounds Rear view. Any ideas on what it is packing yet? https://hosting.photobucket.com/imag...080&fit=bounds And looking around it, serious load carrying capacity. I love Slotmags. https://hosting.photobucket.com/imag...080&fit=bounds 165/55 - 14 inch steels. https://hosting.photobucket.com/imag...080&fit=bounds Looks like a pretty standard car. https://hosting.photobucket.com/imag...080&fit=bounds It certainly is not, and I love it. More in a bit. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
[quote author="@nickwheeler" source="/post/2734061/thread" timestamp="1653852234"][quote source="/post/2734059/thread" author="@skodacious" timestamp="1653851102"]That Metro looks like a proper little sleeper. Would there be a turbo hiding in there somewhere?
[/quote]It's a VVC, with a mildly ported head and the later engine management. Which should be nearly 160hp. Stock K-series turbos want to fit where the radiator is in a Metro[/quote] |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
I need prayers too………..
Did the DIY renewal of my passport after about 50 photos and 9 submissions failed the test. I eventually submitted a 50% liable for success photo. https://hosting.photobucket.com/imag...080&fit=bounds Lets hope HM Customs etc, approve of the pic I submitted. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
From the Metro owner.
The Metro has been my daily for almost two years and Nick had a big hand in putting it together, the plan was to make it look as much like a factory built car as possible and 99% of it is MG Rover parts bin, mostly MGF bits for the mechanical upgrades then a rare leather interior, electric windows etc from higher spec Metros. I absolutely love it but will sadly have to move it on soon to pay for my TR7. Glad you liked it Rian, really good to see the progress on the Rocket since I saw it a few weeks ago. They effort on the little details now will make such a difference later |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
So, is there a road trip in the future?
Let’s see if this gets replaced with a new one. https://hosting.photobucket.com/imag...080&fit=bounds Sometimes, as @merlind100 Richard and @nickwheeler said to me yesterday, sometimes we are so close to the work we are doing, that we cannot see the progress ourselves. Yesterday, even fitting the removable license plate mount to the front bumper became an issue, with me walking away in a huff because I could not get the second R-Clip inserted fully, so I went to make coffee and grab a pack of Pork Pies. Nick pushed it through later when the car was up on the jack and axle stands to fit the 3rd newly made brake line. So plate in position. https://hosting.photobucket.com/imag...080&fit=bounds While I played with the inner carpets etc, Nick made up a pair of braided stainless steel hoses. One for the rear end that had failed, and another to replace the new rubber front hose I bought earlier on. Now the whole lot are uniform. After much pumping and checking, all four corners are bled and feel good. Plus they seem to work in static testing. One litre of Dot 4 has made its way into the system, soon to be drained and replaced with fresh new DOT 4 Handbrake will get set too. Nick,took a better photo of all the hoses together, but this will have to do, my eager, out of sync pic. https://hosting.photobucket.com/imag...080&fit=bounds Back to the interior, trimming and making fiddly bits….. Nick made a couple of Slim hexagonal nuts with a 10x1.25 thread, to use to make a locking nut for the gearstick, in order to lock it in place. Locktite later. https://hosting.photobucket.com/imag...080&fit=bounds Also delivered by the Man from DelMonte was a vacuum fitting for the brake booster. Nice job there too. https://hosting.photobucket.com/imag...080&fit=bounds While Richard was here I carried on shaping and planning the carpet over the tunnel. Cutting out the handbrake lever gaiter nd holding plate sized hole to allow lart one of the fit. https://hosting.photobucket.com/imag...080&fit=bounds Next up, a folded back collar on the rear edge, glued in place, and the gearshift hole to be cut in. https://hosting.photobucket.com/imag...080&fit=bounds Then it was back to a redesign and rethink on holding the carpet and gaiter in place around the gearshift. YOU SEE……… THIS IS WHY THIS IS TAKING SO LONG. CAR BUILDERS TANGO….. TWO STEPS FORWARD, THREE……. More CAD and woodwork. https://hosting.photobucket.com/imag...080&fit=bounds Bevelled back somewhat https://hosting.photobucket.com/imag...080&fit=bounds Remove part of Donor from tunnel. And yes, it is needed. https://hosting.photobucket.com/imag...080&fit=bounds Fits, bolt heads recessed. Needs black paint. (Where is Nick 😂 ) https://hosting.photobucket.com/imag...080&fit=bounds Early finish. Monday morning and back to work. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Would you pick up £135.00 if it landed in your way….?
I need to put an edge to the new drive planned for when I get some time. Down the side to retain the garden. https://hosting.photobucket.com/imag...080&fit=bounds Sally’s son is redoing his garden, and it all has to be new, no cleaning up and reuse So I went 6 miles to rescue these 25 450x450 slabs and 4 shorter ones after work. Glad I have a wagon. https://hosting.photobucket.com/imag...080&fit=bounds And ready to be used when I get to it. Plan is to pressure pressure clean them all before using. https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds You go do the maths. https://hosting.photobucket.com/imag...080&fit=bounds As an aside, filled the car today. Diesel price per litre. https://hosting.photobucket.com/imag...080&fit=bounds Thank goodness for free cash laying around. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Report back from Nick tonight.
Old and New brake lines.. https://hosting.photobucket.com/imag...080&fit=bounds Fitted the rear one. https://hosting.photobucket.com/imag...080&fit=bounds Onto the coolant elbow. Some heat and gentle Dremmel work. Gave this. https://hosting.photobucket.com/imag...080&fit=bounds Tapped M10 and filed flat with most of the repair piece. https://hosting.photobucket.com/imag...080&fit=bounds Repair piece screwed in so Nick can clock the hose (which he still needs to make and solder in) https://hosting.photobucket.com/imag...080&fit=bounds And there you have it. A highlight of the week, on a Monday evening. Chuffed yes. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
But... yes, you do that and pick it up. The pipe connection looks good.
|
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Quote:
@nickwheeler knocked on the door But But But But…….. it is only Tuesday evening. Sally was having dinner, I had already eaten, so we decamped to the kitchen. Nick is amazing in the way he can contain his obvious excitement and pride. Pride - rightfully so. Excitement at completing this bit of reconstructive surgery on the MX5 cooling system pipework that he knocked out in no time. I was super chuffed and impressed, thankful, pleased, all of the above. Mr Smug-Mug https://hosting.photobucket.com/imag...080&fit=bounds Love the detail he turned in here. https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds Final fine tuning to be done when fitting back on the car. https://hosting.photobucket.com/imag...080&fit=bounds And of course the whole problem solver. https://hosting.photobucket.com/imag...080&fit=bounds Thanks a million Nick. The highlight of the week became even Highlightererer. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Sorry for the wrong term, does "hose connector" describe it better? But whatever, good progress.
|
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Quote:
Quote:
Rohrverbinder Schlauchverbinder, alle sind gut genug. Ich vermute, die meisten von uns hier sprechen viel weniger Deutsch als ihr sehr gutes Englisch. Ich denke auch, dass es bei medizinischen oder technischen Beschreibungen zu einer komplexeren Situation wird, richtig zu übersetzen. Vielen Dank für Ihre anhaltende Unterstützung und Ihr Interesse. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
What he said, yeah that's it. :lol:
|
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Quote:
So at last. Carpet time. Transferring the shapes to the carpet…… know how to do it? Use blackboard chalk, draw the edges, and push the carpet down on it. Cut out. Job done. https://hosting.photobucket.com/imag...080&fit=bounds Prepped the hold down as well, as I do not have any more vinyl left over, and am not buying a massive piece just to get a small 12x12 inch pice to cut out. https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds Next up……….. Glue time. Contact glue is an absolute barsteward. But the first tunnel section was down, after getting the safety harness bolts ready, cutting the holes in the carpet. https://hosting.photobucket.com/imag...080&fit=bounds Fine threaded bolts with thin heads. https://hosting.photobucket.com/imag...080&fit=bounds Using the Hooker Harness on the drivers side and the Simpson on the passenger side meant different fixings. Fortunately it all works. https://hosting.photobucket.com/imag...080&fit=bounds Passenger side. https://hosting.photobucket.com/imag...080&fit=bounds One small job to do was to seal all the original MX5 gearshift plate to the transmission tunnel. https://hosting.photobucket.com/imag...080&fit=bounds Next up was the big butterfly piece. Thankfully David was out for a smoke, so I pulled him into the job as it needed four hands. The contact adhesive is strong, and goes off really fast. https://hosting.photobucket.com/imag...080&fit=bounds Pleased with the outcome so far. Then Sally came and I came indoors to cook dinner. Mote in a bit for those awake, interested, bothered to check in. Back in a bit. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
|
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
I was delivering oop North.
And hoping to snag this old man…….. https://hosting.photobucket.com/imag...080&fit=bounds But common sense prevailed ultimately. Maybe another day. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
‘Schmidt used to run a 400cc super scooter engine, “too scary” so downgraded to 250cc
https://hosting.photobucket.com/imag...080&fit=bounds Next door neighbour has some interesting, weird, rare, unusual stuff. RO/80 is fitted with a V4 Ford engine. https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds Two owner 1937 Ford Flathead V8 Was replaced with the Jag that had the bonnet above. https://hosting.photobucket.com/imag...080&fit=bounds |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
After dinner I cable tied and stapled the gaiter to the stick and also the anchor surround.
https://hosting.photobucket.com/imag...080&fit=bounds From the top. https://hosting.photobucket.com/imag...080&fit=bounds Carpets and floor sections in. Not yet got carpet for the firewall, so just gave it some satin black. https://hosting.photobucket.com/imag...080&fit=bounds Dash added in just to get an idea of how it looks. https://hosting.photobucket.com/imag...080&fit=bounds Closer up look. https://hosting.photobucket.com/imag...080&fit=bounds And close up of the completed gearshift gaiter. Some more detail work to be done. https://hosting.photobucket.com/imag...080&fit=bounds I have to say, I am pretty pleased with the outcome so far. Later. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Look around.
Some nice stuff out there. Over at Craigs for the Queens Jubilee weekend. https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.Photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds Last night Craig brought me some items I had asked him to collect for me……… https://hosting.photobucket.com/imag...080&fit=bounds Today Craigs wife, Lorraine asked me to make her a rustic garden bench using one of the new sleepers they have stashed out back. So of course I could not just screw some bits together. Went for a rummage in Craigs woodpile. Found so e very green, moss covered wood. Pressure cleaner to the rescue. https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds Measured and cut the sleeper. https://hosting.photobucket.com/imag...080&fit=bounds While I was in an artistic mood, I called Elli, and asked her to draw me a cat………. https://hosting.photobucket.com/imag...080&fit=bounds Got going with the router. Result https://hosting.photobucket.com/imag...080&fit=bounds Going further with the router, I managed to spell PEACE correctly. https://hosting.photobucket.com/imag...080&fit=bounds Test fit. https://hosting.photobucket.com/imag...080&fit=bounds Then made a backrest. https://hosting.photobucket.com/imag...080&fit=bounds And job done. https://hosting.photobucket.com/imag...080&fit=bounds Lorraine was very pleased. Even cooked me dinner. I also cut a Hawthorn hedge which is a nightmare. Couple of beers next. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
1 Attachment(s)
This turned out to be a great wooden bench, it is certainly not easy to write with the milling machine. Since we were just slowed down by Covid19, we watched trooping the color for the jubilee, what a great queen over this long period, what a great presentation from the regiment.
|
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Quote:
Yes, the milling machine is less controllable used freehand. But it suits the style of the bench. Once it ages and blends into the garden it will be good. Saturday at Craigs. Weirdly slow, but busy. We prepped the American mail box mounting that had to wait this long until the gate post was repaired, two large trucks had managed to hit it last year. https://hosting.photobucket.com/imag...080&fit=bounds And weirdly, in the old mailbox were all these address change documents from DVLA. Seems a few more came before. Who needs this many V5c documents. Craig does. https://hosting.photobucket.com/imag...080&fit=bounds After this we headed into Whitchurch for a few hours. I needed a few things, including a small gift and a card for Sally, turns out that I needed a bottle of Jack Daniels Tennessee Honey to celebrate the Queens Platinum Jubilee with. Saw a few older cars, some lovely British vintage stuff. Including this mechanically fully restored Land Rover, a double mailbox with patriotic crocheted cover and a lovely large cast iron drain cover. Foot added for perspective of size. https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds Back home we unloaded the 8 foot concrete posts and carried them around to where the reclaimed/recycled greenhouse would ho. A bit of digging and levelling to get the foundation work sorted. Lunch on the job was curried beef mince on rice, on site and a cuppe later. https://hosting.photobucket.com/imag...080&fit=bounds Then I spent an hour cleaning it all up. https://hosting.photobucket.com/imag...080&fit=bounds While I was doing this, Craig burned and cleared a load of his hedges where the previous owner had for years just dumped all cuttings and garden waste. It took a few hours but made a huge difference to the fences and underhedge spaces. Much better. Glass next. https://hosting.photobucket.com/imag...080&fit=bounds After the greenhouse, I got the super long extension put and got my personal hedge trimmer from the car. Then went up to the rear and side boundaries and hard cut the hawthorn horse paddock hedges back. They have not been cut since last year and needed a good meter or 3 foot cut back. Once done and cleared up, it looked a whole lot tidier too. We decided to shut shop by 6.00pm and relax with the Queens Jubilee etc. Dinner was pretty much unsurpassed. Meatballs in Tiger bread baguette rolls, followed by another bowl of trifle. https://hosting.photobucket.com/imag...080&fit=bounds Overnight rain set in, so the planned bootfair today was shelved. Watching the rain is rather enjoyable too. Headed home, down South Later. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Well.
Alllll the way from Mumbai (Bombay if you are older) via Shropshire……. New headlights. https://hosting.photobucket.com/imag...080&fit=bounds I really do hope they look as good in reality as it did in concept. We will see, later. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Popped over to my friend Kevin this afternoon to use his hydraulic pipe bender to try and see if I can actually make up my own roll bar as local builders are too busy to take on a small job like this.
He has completed his build too. Not bad for a first build done in your 70’s https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Popped over to my friend Kevin this afternoon to use his hydraulic pipe bender to try and see if I can actually make up my own roll bar as local builders are too busy to take on a small job like this.
I took my template and a length of scaffolding pipe. Resulting in. https://hosting.photobucket.com/imag...080&fit=bounds And realising that I should be able to pull it off. https://hosting.photobucket.com/imag...080&fit=bounds I will have to find a 14 foot length of scaffolding pipe to use. Also important is to keep in mind the amount the metal moves when you bend it in the hydraulic press. Pretty chuffed with this tonight. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Went out to walk Bonnie tonight.
Up,a lane I saw a pile of scrap. And a nice wrought iron bracket. On the way back, I went and knocked on the door and asked if I could rummage in the junk. Yes of course came the reply. Walking back toward the car, carrying this lot for 2km had Sally taking a pic of just how good I look scavenging. Do I care? https://hosting.photobucket.com/imag...080&fit=bounds Back home I checked it out. Thermometer one side, https://hosting.photobucket.com/imag...080&fit=bounds Clock, that works and barometer on the other side. And it all works. https://hosting.photobucket.com/imag...080&fit=bounds Chuffed for sure, a nice thing to hang somewhere.. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Real nice find from your walk.
Very nice shirt you are wearing too. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Quote:
That hoody came from Tat2Don years ago in a care package. Well worn, but still a favourite. |
All times are GMT -4. The time now is 01:56 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com