The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)
-   -   What did you do to your truck today? (https://67-72chevytrucks.com/vboard/showthread.php?t=368988)

pdxhall 08-20-2011 03:53 PM

Re: What did you do to your truck today?
 
Got a visit from the Brown truck yesterday. New fuel tank and u-bolts and poly bushing for the trailing arms. Starting to fab up the fuel tank install. Hopefully I'll have pics tonight.

towersddg9 08-20-2011 06:23 PM

Re: What did you do to your truck today?
 
3 Attachment(s)
Put my dual fan in, plus a trinary for the ac clutch and 2nd fan

dodgiesdad 08-20-2011 09:35 PM

Re: What did you do to your truck today?
 
1 Attachment(s)
Went to the range. My son and i shot his new rifle in and i re-sighted my muzzleloader in with a new scope.

BMERDOC 08-20-2011 09:49 PM

Re: What did you do to your truck today?
 
1 Attachment(s)
Almost done painting it!!Gotta lower it soon!!

chevyrestoguy 08-20-2011 10:28 PM

Re: What did you do to your truck today?
 
I pulled the original 4-speed out of the truck and removed the crossmember in anticipation of the upcoming suspension swap. I also cut out the old exhaust and removed about 10lbs of dirt and grime off the chassis. I'll break out the steam cleaner next weekend and really make a mess.

pdxhall 08-20-2011 10:58 PM

Re: What did you do to your truck today?
 
4 Attachment(s)
I started installing my new rear mount fuel tank. I'm not quite done yet but enough to post a couple of pix. What do you think?

losthope 08-20-2011 11:34 PM

Re: What did you do to your truck today?
 
well yesterday the neighbor kid needed some money to go to the high school football game, so i had him chase tools and had him crawl under the truck with me and i showed him how to install the th350 i picked up.He seemed really interested and it helped me since im still on crutches...then today i rewired engine compartment and hooked up a set of headman headers, and put the edelbrock carb that came with the truck on,and got the motor to turn over and a couple backfires through the carb ,but carb needs to be rebuilt and was leaking all over the place, so i moved on to putting some 6x9's in the gapping door holes and installed a cd player .....i now have tunes!

Rich 5150 69 08-21-2011 01:29 AM

Re: What did you do to your truck today?
 
Good to here you making progress, Losthope. did you here the news in our area, some guy working on his `54 chevy pu with a drop light had a fuel leak, set his garage on fire, lost his truck, `54 belair and mini van...sad

losthope 08-21-2011 01:40 AM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by Rich 5150 69 (Post 4856403)
Good to here you making progress, Losthope. did you here the news in our area, some guy working on his `54 chevy pu with a drop light had a fuel leak, set his garage on fire, lost his truck, `54 belair and mini van...sad

no i didnt hear that!!!!!:jdp: what a shame!!everybody worrys about gas tanks in the cabs then others worry about them behind the axle sometimes its the things you dont expect that go wrong....

samuellg1977 08-21-2011 02:01 AM

Re: What did you do to your truck today?
 
I added some length to my exhaust. The duals dumped right behind the cab and echoed on EVERYTHING under the bed. Now, nice and quiet in the cab with a little bit of rumble outside... the way it should be. Now, maybe I won't get headaches from the roaring in the cab with me!!

Slow Build 08-21-2011 02:46 AM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by samuellg1977 (Post 4856431)
I added some length to my exhaust. The duals dumped right behind the cab and echoed on EVERYTHING under the bed. Now, nice and quiet in the cab with a little bit of rumble outside... the way it should be. Now, maybe I won't get headaches from the roaring in the cab with me!!

How far back did you go with the exhaust.

samuellg1977 08-21-2011 04:01 AM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by Slow Build (Post 4856462)
How far back did you go with the exhaust.

The end of the muffler is in the center of the cab, but the pipe runs all the way out to the step on each side. Considering putting a X or H-pipe in it to balance it out. I dunno yet though.

Rich 5150 69 08-21-2011 09:20 AM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by pdxhall (Post 4856146)
I started installing my new rear mount fuel tank. I'm not quite done yet but enough to post a couple of pix. What do you think?

Looks good pdxhall, Mustang...? how many gallons....? How much room for the tracking bar...?

samuellg1977 08-21-2011 11:17 AM

Re: What did you do to your truck today?
 
1 Attachment(s)
Quote:

Originally Posted by samuellg1977 (Post 4856489)
The end of the muffler is in the center of the cab, but the pipe runs all the way out to the step on each side. Considering putting a X or H-pipe in it to balance it out. I dunno yet though.

Here is a picture of the mufflers and the drivers side extension i put on yesterday. Makes a world of difference inside the cab.

HEI451 08-21-2011 11:40 AM

Re: What did you do to your truck today?
 
You might also add a balance tube in the after muffler tubing between both pipes, near where the exit the mufflers.

samuellg1977 08-21-2011 12:10 PM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by HEI451 (Post 4856794)
You might also add a balance tube in the after muffler tubing between both pipes, near where the exit the mufflers.

In addition to or in place of an H-pipe before the mufflers? What does this do to the performance or sound? It is an all stock 350 with some headers, so I am not concerned with peeling the street back or anything. I just like a nice V8 sound out of these old trucks.

HEI451 08-21-2011 12:56 PM

Re: What did you do to your truck today?
 
I would have built an X pipe instead of a front balance tube, and then, add the rear balance tube to the after muffler/tail pipe setup.

This does help overall performance, and helps keep the system quieter, without making it sound like a Rolls Royce.

I am building this system for my 1964 Chevy C30 1 ton dually flatbed truck, with 305E V6. Have same on my 1972 all aluminum Rover V8 engined Vega.

Vernski 08-21-2011 03:43 PM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by el_bole (Post 4855534)
Mark,

What are the tail lights you are running on your GMC? I just got a short bed and looking at options for the tail lights....dont really care for the original look..

Thanks,:chevy:
Roberto

Hey Roberto you could PM Mark about the taillights or look in the search under taillights I know he had a write up on the forums about them...Vernski:mm:

pdxhall 08-21-2011 06:50 PM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by Rich 5150 69
Looks good pdxhall, Mustang...? how many gallons....? How much room for the tracking bar...?

X2
yes, it's an early mustang tank, 16 gal. It will not interfere with the track bar where I mounted it. The cross bars for the bed will have to be modified slightly but I really like the way in tucks into the frame with very little hanging down.

markeb01 08-21-2011 06:54 PM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by el_bole (Post 4855534)
Mark,

What are the tail lights you are running on your GMC? I just got a short bed and looking at options for the tail lights....dont really care for the original look..

Thanks,:chevy:
Roberto

Hi Roberto, I didn’t see you post until I spotted Vernski’s reply this afternoon. The tail lights are aftermarket 1959 Cadillac, and the brackets were custom made by my son who’s a machinist.

I’ll pull together the component photos, install pictures and original drawings and try to get them posted later tonight. Thanks for asking, Mark.

el_bole 08-21-2011 07:18 PM

Re: What did you do to your truck today?
 
Vernski and Mark,

Thanks for getting back to me LOL. By the way vernski love the stance on your GMC, did you use drop spindles too or just the springs?

Thanks for the info Mark, I look forward to seeing the write up about the caddy tail lights...

Well I worked and sweated all day disconnecting everything from my '61's 235 inline six, gonna remove it.....

On a seperate note I bought a c10 2wd SB rolling chassis for the axle/cross members and I am considering puttin my '61 cab and bed on it. Any thoughts?

Captainfab gave me some great insights, I'd just like more opinions.. Thanks guys for helping a guy out.

Roberto:chevy:

Vernski 08-21-2011 10:12 PM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by el_bole (Post 4857561)
Vernski and Mark,

Thanks for getting back to me LOL. By the way vernski love the stance on your GMC, did you use drop spindles too or just the springs?

Thanks for the info Mark, I look forward to seeing the write up about the caddy tail lights...

Well I worked and sweated all day disconnecting everything from my '61's 235 inline six, gonna remove it.....

On a seperate note I bought a c10 2wd SB rolling chassis for the axle/cross members and I am considering puttin my '61 cab and bed on it. Any thoughts?

Captainfab gave me some great insights, I'd just like more opinions.. Thanks guys for helping a guy out.

Roberto:chevy:

Just the coil springs Roberto it still has stock spindles but because it's GMC it has leaf springs on the rear w/3 leafs taken out...Verski:metal:

smilts60 08-21-2011 10:14 PM

Re: What did you do to your truck today?
 
I went out in the backyard today, and took a real good long hard look at my truck. Then went to bed. But a couple of days back I cleaned out he back. and removed the seats did some fiddling with the tailgate. Im getting ready to move it around front and begin work on it.

bobbylast 08-21-2011 11:24 PM

Re: What did you do to your truck today?
 
i found a six foot long batch of shed snake skin... today i sprayed my truck out with spectracide...hopefully any lurking snakes will bail out.

samuellg1977 08-21-2011 11:59 PM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by bobbylast (Post 4858143)
i found a six foot long batch of shed snake skin... today i sprayed my truck out with spectracide...hopefully any lurking snakes will bail out.

It's not that I am afraid of snakes... It's a game that I play... When I see a snake, I scream like a little girl and RUN. The farther away I get, the more points I award myself. And I have NEVER lost!!!


All times are GMT -4. The time now is 11:49 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com