Re: 53 Surburban "Family Truckster"
Are your front bag mounts upside down? Looks good, subscribed
|
Re: 53 Surburban "Family Truckster"
Quote:
Following this killer build,... |
Re: 53 Surburban "Family Truckster"
Quote:
Quote:
Marc |
Re: 53 Surburban "Family Truckster"
Marc, frame is looking great...Jim
|
Re: 53 Surburban "Family Truckster"
Those PorterBuilt welds are nice!!!
|
Re: 53 Surburban "Family Truckster"
Quote:
Quote:
Marc |
Re: 53 Surburban "Family Truckster"
5 Attachment(s)
Well, I got back at it this afternoon. I spent a great deal of time re-doing some things. I flipped over my top bag mounts. Upon mounting the rear notch I realized/confirmed that my passenger side front PB frame rail needed to move forward about 1/4".
After I got that squared away I moved to the back. I clearance for the bolts of the notch. It fought me when I tried sliding the notch over the frame. I figured out I had the notch backwards. You might laugh, but it is somewhat easy to screw up. Once I figured it out it fell right in, but I fought it for 30-45 minutes first...ha ha. Porterbuilt also does something neat to try to eliminate this type of mistake. They put a small notch in the front of each part. I took a picture of one of the notches to you can see what I'm referring to. I looked at this notch and thought no, I have it right...I was wrong. The good news was by the end of the evening, I mounted both notches as well as the bridge. All that is left is to drill some holes and cut out the old frame....on to the pics. I should mention that these photos were after a massive garage floor cleanup. I had all sorts of metal shavings and grinder dust. |
Re: 53 Surburban "Family Truckster"
Do you know when PB Fab will start releasing these kits to the general public?
|
Re: 53 Surburban "Family Truckster"
Looks great...Nice work Marc.
|
Re: 53 Surburban "Family Truckster"
That is going to be one sweet burb.
|
Re: 53 Surburban "Family Truckster"
[quote=84blaze;7393282]Do you know when PB Fab will start releasing these kits to the general public?[/QUOTE
I would say soon. Give Nate at Porterbuilt a call and ask. Quote:
Quote:
Marc |
Re: 53 Surburban "Family Truckster"
Looking pretty nice! - are you planning on welding everything up to the frame after its all figured out? I would think that would be better for strength overall.
|
Re: 53 Surburban "Family Truckster"
[quote=youngrodder;7394625]
Quote:
|
Re: 53 Surburban "Family Truckster"
Quote:
[quote=69CST-V;7395374] Quote:
Marc |
Re: 53 Surburban "Family Truckster"
Just a Question: If all your using of the original frame is the straight center part why not build the whole thing new.?
|
Re: 53 Surburban "Family Truckster"
Quote:
Again there is a bunch of different ways to go about it. This is the route I chose since I don't have experience setting up a chassis from scratch. I would rather pay PB for their engineering...ha ha Marc |
Re: 53 Surburban "Family Truckster"
You are right on that Marc!
If the frame is not broke don't fix it kinda thing, simply box in the remaining portion of the frame and will be way stronger than O.E. Mark... |
Re: 53 Surburban "Family Truckster"
Quote:
Quote:
|
Re: 53 Surburban "Family Truckster"
Maybe I missed it, but what truck suspension goes on the PB kits? I assume its C10 stuff. Also, did you order everything including arms, rack and shocks from them? Or are you going to source those parts later?
|
Re: 53 Surburban "Family Truckster"
Quote:
I will have more pics of the a-arms and other components soon. I'm getting ready to cut some rivits from the factory center support and bold in the new PB one. This center section is very nice look part (as is the case with all of the PB parts). Marc |
Re: 53 Surburban "Family Truckster"
2 Attachment(s)
I have spent the last few day fine tuning and confirming my rear dimensions. Nate at PB has been great to send me all sorts of cad drawings to make sure that I was spot on with my measurements. Keep in mind that this is first Suburban frame, so we need to make sure that there are no major differences. SO far so good.
I'm getting ready to drill the remaining holes for the rear notch and add the other support pieces. Then I will turn my attention to the factory support center section to get the rest of the rivits cut out in order to install the PB center support. I plan to get out in the garage this weekend. Marc |
Re: 53 Surburban "Family Truckster"
Looking good Marc, bet your getting all sorts of Excited now!
|
Re: 53 Surburban "Family Truckster"
Nate sure provides outstanding customer service in addition to his high quality parts.
Marc, the only difference I've noticed between the Suburban and truck frames was the body mount outside the frame by the rear running board bracket that you had a picture. There might be others. My chassis was built from a truck frame so I just transferred that mount. |
Re: 53 Surburban "Family Truckster"
looking good... I assume this will be able to drag the running boards if you want?
Have you decided on size of wheels? |
Re: 53 Surburban "Family Truckster"
Quote:
Quote:
Quote:
Marc |
All times are GMT -4. The time now is 11:06 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com