Re: A 15 year old's project. Rusty 62 stepside
Quote:
|
Re: A 15 year old's project. Rusty 62 stepside
1 Attachment(s)
Made a run out to picknpull this morning and got a couple different things. One was these Cadillac seat belt buckles for the tailgate latches just like on the Persh trucks website
|
Re: A 15 year old's project. Rusty 62 stepside
1 Attachment(s)
The ones I bought
|
Re: A 15 year old's project. Rusty 62 stepside
1 Attachment(s)
I also Did some more work on the t5 install. I went to picknpull today because I previously bought the wrong slip yoke. Instead of searching online and paying big bucks I just pulled a camaro driveshaft from the yard that was the same 2.5'' diameter as mine and cut off the front end so that when I get it shortened I can get them to put on the front portion from the camaro. Also when I go to buy ujoints I just have to tell them it's an 86 Camaro. I also pulled the license plate bracket from the camaro as well. It's on a hindge and has a spring that locks in the open and closed position. That how I'm going to fill the gas tank.
|
Re: A 15 year old's project. Rusty 62 stepside
1 Attachment(s)
Then when I got back I worked on the portion of the inner rocker that goes between the cab support and the door pillar
|
Re: A 15 year old's project. Rusty 62 stepside
1 Attachment(s)
And here it is sitting in place. Holes still need to be drilled
|
Re: A 15 year old's project. Rusty 62 stepside
Nice! Looks good.
|
Re: A 15 year old's project. Rusty 62 stepside
Quote:
Here's a video showing the flip up licence plate bracket http://youtu.be/eTNxc0y1bzM |
Re: A 15 year old's project. Rusty 62 stepside
1 Attachment(s)
Another busy day with great results. I drilled the holes and welded in the panel that covers the cab support and goes under the pillar
|
Re: A 15 year old's project. Rusty 62 stepside
1 Attachment(s)
Then I made a patch for the lower kick panel
|
Re: A 15 year old's project. Rusty 62 stepside
1 Attachment(s)
Then welded it in and drilled the holes
|
Re: A 15 year old's project. Rusty 62 stepside
1 Attachment(s)
02
|
Re: A 15 year old's project. Rusty 62 stepside
1 Attachment(s)
And then I welded and bolted in the lower door pillar section that I made. All the welds still need to be ground down.
|
Re: A 15 year old's project. Rusty 62 stepside
Looks good!
|
Re: A 15 year old's project. Rusty 62 stepside
X2! You got some skills bud. lol Build on. :chevy:
|
Re: A 15 year old's project. Rusty 62 stepside
1 Attachment(s)
And I was finally able to set the truck down on the new tires
|
Re: A 15 year old's project. Rusty 62 stepside
Ah, that's what it is.....all that perrty weather. Ya'all done givin us yer rain! LOL
|
Re: A 15 year old's project. Rusty 62 stepside
1 Attachment(s)
And if your driveway doesn't look like this at the end you aren't doing it right
|
Re: A 15 year old's project. Rusty 62 stepside
Quote:
Quote:
|
Re: A 15 year old's project. Rusty 62 stepside
Quote:
|
Re: A 15 year old's project. Rusty 62 stepside
Quote:
|
Re: A 15 year old's project. Rusty 62 stepside
1 Attachment(s)
Oh and I also hung the door and it looks like I did my measurements correctly as the door fits pretty nicely
|
Re: A 15 year old's project. Rusty 62 stepside
1 Attachment(s)
Here's another pic of the repaired areas. Still need to finish the kick panel and the floors
|
Re: A 15 year old's project. Rusty 62 stepside
Beauty! I'm right there with you. Just waiting on some front supports to finish up the passengers side. I think it fits better when you make it your self
|
Re: A 15 year old's project. Rusty 62 stepside
Quote:
|
All times are GMT -4. The time now is 09:34 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com