![]() |
Re: Project "Schrum" 1959 Gmc 100
I'm hoping to get one pretty soon
Since my kick panel on the driver side was rotted, I just went ahead and bought another complete A-Pillar/Kick-panel assembly like I said in my previous post |
Re: Project "Schrum" 1959 Gmc 100
https://www.youtube.com/watch?v=4r9nhgVvklc
Not sure if I have posted this before, but here is a video of what I am dealing with on the truck |
Re: Project "Schrum" 1959 Gmc 100
Definitely a lot of sheet metal work to be done but keep at it a piece at a time and you will get there. Just dont give up. It will be worth it in the end.
|
Re: Project "Schrum" 1959 Gmc 100
It's overwhelming but it is getting there. I have an entire new top that is going to go on to the truck since my top is rotted all to hell
|
Re: Project "Schrum" 1959 Gmc 100
Here is a video of just the engine in my truck
https://www.youtube.com/watch?v=B8cIEu5Cig8 |
Re: Project "Schrum" 1959 Gmc 100
|
Re: Project "Schrum" 1959 Gmc 100
5 Attachment(s)
Here are some more photos for y'all to enjoy
I was test fitting the front fenders to see what the front would look like, still waiting on the headlight patch panels A friend put a new master cylinder in the truck since the original started going bad and I didn't want to chance having an accident |
Re: Project "Schrum" 1959 Gmc 100
I'm debating on going with another cab, since mine
is so rusted. It'll be cheaper to replace it rather than paying 5,000 or so to fix the cab. I can still keep the original cab in my barn |
Re: Project "Schrum" 1959 Gmc 100
3 Attachment(s)
Update on the truck
Bought new bumpers New door hinges Every bolt kit for the truck(Polished stainless Steel) New horn contact bushing New electric wiper motor New choke cable |
Re: Project "Schrum" 1959 Gmc 100
After seeing your video of the cab rust, I'd definitely weigh options~ see what's available anyway. In the meantime, you're accumulating a bunch of cool parts!
dne' |
Re: Project "Schrum" 1959 Gmc 100
Hello everyone, I am just stopping by to update
The truck is starting back up again to be restored |
Re: Project "Schrum" 1959 Gmc 100
2 Attachment(s)
Took off the grille support and soon to dismount the cab and prep it for rust repair and primer/paint... This is going to be a very nice truck
The plan is to have the cab fixed Repaint the inner fenders have the front fenders fixed have the bodywork done to the front end and have it painted and put back on Super excited to see this restoration begin again |
Re: Project "Schrum" 1959 Gmc 100
1 Attachment(s)
Bought some things for the truck today, still awaiting the windshield
New Master Cylinder floor plug New Deluxe windshield gasket New Rubberized Firewall pad |
Re: Project "Schrum" 1959 Gmc 100
Keep after it, when doing a patch just ask yourself is it better than it was, Yes is usually the answer. It don't have to be perfect, most trucks aren't that's what gives them character , do the best you can with what you got, and enjoy it.
Here is a couple of songs that can lift you up and put a smile on your face ENJOY: Jerry Jeff Walker Pick Up Truck Song https://www.youtube.com/watch?v=RWK8GgWD4uA Glen Campbell ~ I Love My Truck https://www.youtube.com/watch?v=VGQNVq5Ou4E |
Re: Project "Schrum" 1959 Gmc 100
1 Attachment(s)
Bought some more parts for the truck a few days ago
Thanks for the songs man i'll add them to my spotify account |
Re: Project "Schrum" 1959 Gmc 100
1 Attachment(s)
New hood to cowl seal
New Arm Rest New lower door retainer |
Re: Project "Schrum" 1959 Gmc 100
1 Attachment(s)
I finally bought another grille for the truck since the original was rotted beyond repair. It’s got surface rust and paint but will be chromed soon
|
Re: Project "Schrum" 1959 Gmc 100
Good find! That'll look great!
dne' |
Re: Project "Schrum" 1959 Gmc 100
what do you estimate the cost of repairs to be compared to the cost of a new cab? new cab comes with doors too, right? could be close and the new cab gets you that much closer to a finished truck you can enjoy beeddling around in. if doing it again I would seriously consider the new cab for the time difference alone and the cost gets pretty close if you honestly add up everything you use to fix the old one.
your truck, your wallet, do what you like. post pics though. nothing like pics of a build to get the rest of us off the couch. |
Re: Project "Schrum" 1959 Gmc 100
there is also a complete floor available, with steps and rockers
|
Re: Project "Schrum" 1959 Gmc 100
1 Attachment(s)
I’ve got everything to replace the cabs rusted areas so far and have nearly everything for the truck except a windshield
Put the grille on the truck earlier today |
Re: Project "Schrum" 1959 Gmc 100
Glad to see you getting busy with it.
|
Re: Project "Schrum" 1959 Gmc 100
anybody out there have afleet truck grille for 59 gmc
|
Re: Project "Schrum" 1959 Gmc 100
Hello everyone
I'm getting ready to have the trucks cab fixed here in a few months or so just figured I would update everyone following this thread I've got everything that I can think of for the truck and just recently purchased a windshield Cheers everyone |
Re: Project "Schrum" 1959 Gmc 100
Can’t wait to see updates
|
All times are GMT -4. The time now is 04:34 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com