Re: My Dusty 71 GMCe Electruck
2 Attachment(s)
those pics are on top of a 2 foot by 4 foot piece of plywood for a size reference, looks like I can fit 9 batteries in that space
|
Re: My Dusty 71 GMCe Electruck
3 Attachment(s)
it was nice of these plastic pliers to show up right after I shot the last battery video, cause you know, safety third
|
Re: My Dusty 71 GMCe Electruck
3 Attachment(s)
yeah, it's winter and I am procrastinating, but when these brand new German (pronounced: "Expensive") BMW high voltage battery cables showed up, I decided to treat 'em right
|
Re: My Dusty 71 GMCe Electruck
5 Attachment(s)
they got these god forsaken never seen before dingle dangle proprietary connectors on 'em that are made from unobtanium
so they had to be liberated |
Re: My Dusty 71 GMCe Electruck
1 Attachment(s)
Why you ask? well we are trying to connect this German BMW 530e high voltage battery pack to a United Statesian Tesla Model S battery charger so that we can charge it and it's like fitting a square peg in a hole that's round
|
Re: My Dusty 71 GMCe Electruck
3 Attachment(s)
so over at our Organic Out Doors Precision High Voltage Battery Cable Modification Facility commonly referred to as the OODPHVBCMF
|
Re: My Dusty 71 GMCe Electruck
3 Attachment(s)
now we can provision a much more civilized connector such as this handsome Anderson SB120 in crimson red
|
Re: My Dusty 71 GMCe Electruck
1 Attachment(s)
and here is a super fun rant (not by me) on how not to treat an Anderson connector
WATCH THIS BEFORE BUYING ANDERSON CONNECTORS!!! SBX350 |
Re: My Dusty 71 GMCe Electruck
Just checking in. It looks like I have quite a bit to read.
|
Re: My Dusty 71 GMCe Electruck
1 Attachment(s)
Quote:
|
Re: My Dusty 71 GMCe Electruck
4 Attachment(s)
Ah Yeah! The Crimpulator 3000 is here! not bad for $32 bones on AMAZON
|
Re: My Dusty 71 GMCe Electruck
5 Attachment(s)
and so we got to work on my test battery cables, I decided to add a little color coding to the two solid orange main leads, first some black heat shrink tubing went on both ends of the negative cable
for this I needed a bunch of yellow tools |
Re: My Dusty 71 GMCe Electruck
1 Attachment(s)
and here is what the six cell modules look like all connected just the way they were inside the 2018 BMW 530e high voltage battery pack
Note the short orange wire on the far right, that's was the original main Positive lead that came off of Cell Module # 6, I decided to replace it with the same orange wire that runs from Cell Module # 1 on the left (that is what the original looked like) so now both leads match One lead was originally shorter than the other. BMW did that because the leads ran to the Safety Box which was located on the right side of the battery pack closer to Cell Module # 6 |
Re: My Dusty 71 GMCe Electruck
Nice clean end of the run on that cable. I'd never have a use for a crimping tool like that, but for 32 bucks seems like a good deal!
|
Re: My Dusty 71 GMCe Electruck
2 Attachment(s)
Quote:
for the record they played the "Your order is delayed game with me, in a failed attempt to get me to cancel it" |
Re: My Dusty 71 GMCe Electruck
4 Attachment(s)
and check this out, this is what I ordered and this is what they shipped
|
Re: My Dusty 71 GMCe Electruck
3 Attachment(s)
think positive
|
Re: My Dusty 71 GMCe Electruck
1 Attachment(s)
and here is the completed DC wire harness with an Anderson SB120 connector in red
|
Re: My Dusty 71 GMCe Electruck
1 Attachment(s)
i heart this battery pack
[what? .... too soon!] |
Re: My Dusty 71 GMCe Electruck
1 Attachment(s)
and how do you plan on charging this BMW battery pack?
|
Re: My Dusty 71 GMCe Electruck
2 Attachment(s)
Why, by using this 34 lbs Tesla Model S Gen 2 charger of course!
|
Re: My Dusty 71 GMCe Electruck
5 Attachment(s)
so since I am going the Open Source (pronounced: "Used Electric Car Parts") route we need to open up this Tesla onboard battery charger and perform a lobotomy on it by replacing it's "logic" circuit board with an open source one, see how that works?
The open source circuit board fools the charger into thinking it is still in the Tesla vehicle and that everything is honkey dory and we can charge. |
Re: My Dusty 71 GMCe Electruck
1 Attachment(s)
then we bag 'n' tag the evidence
|
Re: My Dusty 71 GMCe Electruck
3 Attachment(s)
and because there was an electronic parts shortage during the filming of this movie, I had to harvest some connectors off of the old original logic circuit board and transfer them to the new board
Fun Level = -2 |
Re: My Dusty 71 GMCe Electruck
2 Attachment(s)
mandatory Stare and Compare of the old Tesla logic board and the new "naked" open source one
and by naked I mean not fully built yet |
All times are GMT -4. The time now is 02:37 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com