Re: Lets Play Whatz It? !!
my bad ...winner
|
Re: Lets Play Whatz It? !!
Quote:
Ok .....gonna find one that takes till tomorrow for anyone to figure out....so I can go watch a movie with my girl (and by "can" I mean have to), she just thinks this is a waste of time.......WOMEN can't live with em and you can't shoot em :D |
Re: Lets Play Whatz It? !!
lol :)
|
Re: Lets Play Whatz It? !!
1 Attachment(s)
Not automotive by nature but could possibly used on a vehicle
|
Re: Lets Play Whatz It? !!
the first dash attached razor to use while driving?
|
Re: Lets Play Whatz It? !!
Used for "Shaving" body lines?:lol:
|
Re: Lets Play Whatz It? !!
El Brutus "Johnson Bar" Screw Extractor - 1/4" Screw Capacity
Invented by a retired Air Force mechanic, the El Brutus doesn't care if it's a Phillips, Tri-Wing, or Hi-Torque. When all other screw removal tools fail, this is the tool to call on. Has a handy compartment to store bits when not in use. Folds up for easy storage. Complete instructions included. Choose from two different models. I have to see if I can find something cool!! |
Re: Lets Play Whatz It? !!
Quote:
|
Re: Lets Play Whatz It? !!
1 Attachment(s)
Ok, here you go!! Engine related.
|
Re: Lets Play Whatz It? !!
is it a tool or a part ?
|
Re: Lets Play Whatz It? !!
It's a tool for small engine repair. I couldn't find a regular picture of it.
|
Re: Lets Play Whatz It? !!
1 Attachment(s)
It is used in conjunction with this.
|
Re: Lets Play Whatz It? !!
I used to work on small engines for a living and I still don't know what the heck that is?
|
Re: Lets Play Whatz It? !!
Just guessing, but it is probably more a tool that was shown in the manual, but not used in practice.
I'm probably cheating, without an actual picture, but it is a real tool. |
Re: Lets Play Whatz It? !!
Quote:
|
Re: Lets Play Whatz It? !!
I figured if you couldn't get it, Rush, I would have to add hints! :lol:
I'll make it easy. It is for a newer B & S. |
Re: Lets Play Whatz It? !!
is it a guage for setting top no load and governed idle speeds ?
19385 Adjustment Gauge For adjusting secondary governor spring‚ V-Twin Vanguard engines. |
Re: Lets Play Whatz It? !!
1 Attachment(s)
That's it!! :metal::metal:
According to the manual, it is a gauge to space it out properly, when you use the "tang bender" shown above. It doesn't seem likely that it would get much use. |
Re: Lets Play Whatz It? !!
2 Attachment(s)
yes it's an old engine .....name the manufacturer, h.p. rating, and fuel type
|
Re: Lets Play Whatz It? !!
Quote:
|
Re: Lets Play Whatz It? !!
Serial #26856
11/2 Horse Power Gasoline Engine manufactured by the Waterloo Gasoline Engine Co., Waterloo, Iowa 3 1/2" Bore X 5" Stroke - Rated H.P. at 500 R.P.M. Organized in 1893 as the Waterloo Gasoline Traction Engine Co., the company started life by designing and building tractors. However, due to low sales, gas engines were added to their catalog around 1893-4. Around 1896, the company reorganized as the Waterloo Gasoline Engine Co., but continued in research and development of farm tractors. The result was the Waterloo Boy tractor, first introduced in 1912. Eventually, in 1918, Deere & Co. bought the company and continued the tractor development which has become today's John Deere. This Waterloo Boy engine was only produced in 1911, after which it was changed slightly and rerated to 2 HP. The basic engine on wood skids was $32 US in 1911, with the cart adding slightly to the price. |
Re: Lets Play Whatz It? !!
1 Attachment(s)
Pretty confident I got that one so If I may post another.
Whatz it! |
Re: Lets Play Whatz It? !!
A wrench for tightening the collars on a cement weight set?
|
Re: Lets Play Whatz It? !!
Nope!
|
Re: Lets Play Whatz It? !!
Lock-out valve handle?
|
All times are GMT -4. The time now is 09:57 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com