Re: project INCREDIBLE HULK 6.2L with 6L80E
 

:metal:

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

bit more progress, i got the door fitting the best it could.....the gaps sucked (aftermarket door), expecially around the window frame.....it was too tight on the upper aft part of the window opening, then it tappered to about a 1/4" gap in the middle, and then went to about a 1/32" at the upper front.......what i had to do was cut the door at the front door piller, then remove 1/8" of material, pull the front frame back....that took care of the front piller gap....on the rest of the window frame i pushed the rear of the window frame forward, then shaves off about 1/16" to get the gaps good......
http://i25.photobucket.com/albums/c8...k/100_1702.jpg
http://i25.photobucket.com/albums/c8...k/100_1701.jpg
http://i25.photobucket.com/albums/c8...k/100_1700.jpg
http://i25.photobucket.com/albums/c8...k/100_1698.jpg
http://i25.photobucket.com/albums/c8...k/100_1699.jpg
http://i25.photobucket.com/albums/c8...k/100_1703.jpg
http://i25.photobucket.com/albums/c8...k/100_1704.jpg
http://i25.photobucket.com/albums/c8...k/100_1705.jpg
http://i25.photobucket.com/albums/c8...k/100_1706.jpg
http://i25.photobucket.com/albums/c8...k/100_1709.jpg

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

don ,
the truck is looking great . are you going to weld the seem across the back of the roof ? what's the color gonna be ? well , keep up the great work , can't wait to see it finished. i'm sure the owner ;) is gonna love it !!!!

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

ya we're gonna do a little somethin somethin to the rear roof seam.....;)
as for the color, its still to be determend....

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

here is a bit of an update....
got the rear step notch installed, (the old c-notch wasnt doing it for us) so with the step notch we were able to lower it about 2" more..... here is some pics, the shocks will be added shortly, when the bridge goes in..... also keep in mind that the tires on there now (rear) are for rollers only, they are 31"....
http://i25.photobucket.com/albums/c8...k/100_1769.jpg
http://i25.photobucket.com/albums/c8...k/100_1770.jpg
http://i25.photobucket.com/albums/c8...k/100_1774.jpg
http://i25.photobucket.com/albums/c8...k/100_1777.jpg
http://i25.photobucket.com/albums/c8...k/100_1782.jpg
http://i25.photobucket.com/albums/c8...k/100_1783.jpg
http://i25.photobucket.com/albums/c8...100_1792-1.jpg
http://i25.photobucket.com/albums/c8...100_1793-1.jpg
http://i25.photobucket.com/albums/c8...k/100_1789.jpg
http://i25.photobucket.com/albums/c8...k/100_1790.jpg

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

That's starting to look like a truck!!!!! When's the projected completion date?

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

got a bit of an update.....
im back on the dash/center console....i got the side peices made......the center console is kinda challenging (because i wanted to make it out of 1 peice), so instead of making it out of 1 peice, its gonna be 4 peices welded together....here are the side peices, they have a rolled top (kinda see this in the pics), and also im gonna make a inner structure to support the weight of our electronics, arm rest, and just general wear and tear it'll receive.....
also here is the side profile of how the truck sits now with 30" tires rear and 27.5" tires on the front (both on 15" wheels).......
http://i25.photobucket.com/albums/c8...k/100_1994.jpg
http://i25.photobucket.com/albums/c8...k/100_1990.jpg
http://i25.photobucket.com/albums/c8...k/100_1989.jpg
http://i25.photobucket.com/albums/c8...k/100_1987.jpg
http://i25.photobucket.com/albums/c8...k/100_1985.jpg
http://i25.photobucket.com/albums/c8...k/100_1984.jpg
http://i25.photobucket.com/albums/c8...k/100_1982.jpg
http://i25.photobucket.com/albums/c8...k/100_1981.jpg

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

http://i25.photobucket.com/albums/c8...k/100_1865.jpg
http://i25.photobucket.com/albums/c8...k/100_1867.jpg

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

I take it the garage was getting too smalll...

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

need more photos of the tool ben lol...thought it was goin in the kitchen?

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

yelp, i had to make a move, when i started takeing up family members garage space:lol:
ill have to get some....morgan said "nuh uhhhhh":tms:
the specs are 72" wide 30" deep and 45" tall.....its a big-unnn

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

Hey..... Those bedsides look might familiar :lol: .

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

That's some nice work!

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

looking good.

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

how much would that dash center console run me if u made me one similar to it

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

let me finish up with this one, and ill let ya know;)

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

I am so jealous of your ride height, mine will be 2 inches taller than i had hoped for, guess bags will come into play later, btw that console is just plain Sexy.

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

Need more room :lol:

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

i know...:waah:

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

You will always need more room. We sold our old house to buy this one with a 1200 sq. ft shop, plenty of parking and a 2 story out building and now we are out of space. Luckily I am zoned commercial so I can put a second story on the shop for almost 2400 sq. ft. Not bad for being right down town. Next stop will be 5+ acres!

Truck is looking great by the way. I like the dash you have designed. I should have my Lazze English wheel real soon so I can start playing as well.

Kevin
LFD Inc.

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

got the center console made....the front peices were the last peices to be made, so i made a cardboard templete, transfered it to metal, cut and fit, added a stiffner for some rigitity, then welded together. .....ill add some stiffners that connect the two sides, when the dash comes back out.... here are the pics (the 3rd one looks like some mid-evil deheading device)
http://i25.photobucket.com/albums/c8...k/100_2003.jpg
http://i25.photobucket.com/albums/c8...k/100_2009.jpg
http://i25.photobucket.com/albums/c8...k/100_2010.jpg
http://i25.photobucket.com/albums/c8...k/100_2015.jpg
http://i25.photobucket.com/albums/c8...k/100_2016.jpg

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

and the other side





http://i25.photobucket.com/albums/c8...k/100_2019.jpg
http://i25.photobucket.com/albums/c8...k/100_2020.jpg
http://i25.photobucket.com/albums/c8...k/100_2021.jpg
http://i25.photobucket.com/albums/c8...k/100_2024.jpg
http://i25.photobucket.com/albums/c8...k/100_2032.jpg
http://i25.photobucket.com/albums/c8...k/100_2033.jpg
http://i25.photobucket.com/albums/c8...k/100_2035.jpg

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

and it fitted in,





http://i25.photobucket.com/albums/c8...k/100_2017.jpg
http://i25.photobucket.com/albums/c8...k/100_2029.jpg
http://i25.photobucket.com/albums/c8...k/100_2031.jpg
http://i25.photobucket.com/albums/c8...k/100_2025.jpg

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

Looks great! Are you going to make any provisions for carpet or leather to go under the console or are you going to bind the carpet at the edge?....sorry I'm in interior mode right now and it looks like the console fits nice and flush with the floor...