Re: The '67 Burb Build Thread
 

still dark!lol that is better whens the last time you drove this thing?

Re: The '67 Burb Build Thread
 

gettin closer man..cant wait to see it on the ground!
Posted via Mobile Device

Re: The '67 Burb Build Thread
 

other than pulling it out of the garage to turn it around, the last time i drove it was in november when i brought it here from my house i moved out of

Re: The '67 Burb Build Thread
 

haha hell yah man me to

Re: The '67 Burb Build Thread
 

wow that suck to know that my truck has ran and then i stopped and am doing work to iy and cant drive it would kill me!

Re: The '67 Burb Build Thread
 

haha its not that bad lol. because it is getting some work done to it to make it better

Re: The '67 Burb Build Thread
 

pulled the ball joints out of the old arms and i am painting my new arms so i can start putting them together and get them installed

Attachment 702739

Attachment 702740

Attachment 702741

Re: The '67 Burb Build Thread
 

finished painting the arms and started painting the u bolts/nuts, now i just need to wait for it all to dry. also painted the washers/nuts that hold the cross shaft in yesterday.

Attachment 703602

Attachment 703603

Re: The '67 Burb Build Thread
 

well it should ride really nicely now, right? looking good eric cant wait to see this drivin dwon the streets if i see you i WILL pull you over and check out your ride

Re: The '67 Burb Build Thread
 

haha i hope so, should ride better than it did on cut springs thats for sure. thanks, come on down to so cal and i will give you a ride if you want lol.

Re: The '67 Burb Build Thread
 

well one day i will take you up on that offer!

Re: The '67 Burb Build Thread
 

haha for sure bro, just lmk ahead of time

Re: The '67 Burb Build Thread
 

you bet and when ever your in town here let me knoe ill give you a ride to. you probably won be in my town untilo i get done with mine so it all works out!haha

Re: The '67 Burb Build Thread
 

hahaa for sure lol. i want to try and go to that c/10 bbq Rene puts on this year if possible, but we will see if funds are good enough for that by then.

Re: The '67 Burb Build Thread
 

finished painting the u bolts and nuts, installed the ball joints and one cross shaft, did a quick prime and paint on the front bumper, and installed the one lower arm i got done.

Attachment 704170

Attachment 704171

Attachment 704172

Attachment 704173

Attachment 704174

Re: The '67 Burb Build Thread
 

did a quick wheel check, and have one lower arm left to finish, still need to touch up the paint and tighten the ball joints and tie rod down on the drivers side, regrease the joints and bleed the brake system, do an eyeball alignment, and install windshield and front bumper and i should be just about done enough for the car show

Attachment 704175

Attachment 704176

Re: The '67 Burb Build Thread
 

well...have fun at the show...dont think i;ll b there, at either 1.....still need intake, tune up , wiring, exhaust, bleed brakes, blah blah....got a call into the wiring/brain guy...no return yet tick tock tick tock

Re: The '67 Burb Build Thread
 

that sucks, hope you make get the miracle you need to finish it and make it to the show

Re: The '67 Burb Build Thread
 

not much of an update, was at the docs almost all day. but, i installed the front bumper, touched up the paint on the drivers lower a arm, drilled the holes out bigger for the plastic screw inserts, and remounted the front plate with a new black frame and a smoked lens cover. no pic of that but here is one of the bumper mounted and adjusted.

Attachment 704613

Re: The '67 Burb Build Thread
 

yay looks like a truck again ! i mean burb haha.....it doesnt matter because the liscense plate will cover but why is that hole on the bumper?

Re: The '67 Burb Build Thread
 

hahaha, i was waiting for someone to ask me that lol. that hole is in the bumper because i traded my chrome bumper to my friend for this one, i traded because i didnt want to grind down the chrome on a good bumper just to paint it black. that bumper came off of his 69 longhorn, the previous owner before him drilled 2 holes to the left(drivers side), for mounting the license plate, and cut that hole out to allow air to flow better to the trans cooler that was mounted between the frame rails while towing.

Re: The '67 Burb Build Thread
 

got the drivers side and passanger side complete minus bleeding the brakes, regreasing a few things, and putting the wheels on, airing it up, and dropping it back down. also repainted the bumper again due to a few light scratches from people rubbing against it while walking in front of it:censored: oh well :lol:. and also took a pic of the front with the license plate on with the new black frame and smoked lense cover

Attachment 705059

Attachment 705060

Re: The '67 Burb Build Thread
 

looks good

Re: The '67 Burb Build Thread
 

thanks.

Re: The '67 Burb Build Thread
 

greased the few things that needed it, put the wheels back on and dropped it back on the ground. aired it all the way up and let it all the way down, found out i need to trim a little off the bottom of the carrier bearing crossmember as it is holding it up a little and not letting it lay completely out. also found out i need to loosen up the core support bolts and shift it to the drivers side slightly.

Attachment 705458

Attachment 705459

Attachment 705460

Attachment 705461

Attachment 705462